spi: Tell stacked decoders about missing CS# signal.

[libsigrokdecode.git] / decoders / uart / pd.py

diff --git a/decoders/uart/pd.py b/decoders/uart/pd.py
index d13a11958b70c508e2860e681d542ec089cdd466..d59c6c33fb3fd5738fc84479ae32df99d7c9fd89 100644 (file)
--- a/decoders/uart/pd.py
+++ b/decoders/uart/pd.py
@@ -28,9 +28,10 @@ Packet:
 
 This is the list of <ptype>s and their respective <pdata> values:
  - 'STARTBIT': The data is the (integer) value of the start bit (0/1).
- - 'DATA': The data is the (integer) value of the UART data. Valid values
-   range from 0 to 512 (as the data can be up to 9 bits in size).
- - 'DATABITS': List of data bits and their ss/es numbers.
+ - 'DATA': This is always a tuple containing two items:
+   - 1st item: the (integer) value of the UART data. Valid values
+     range from 0 to 512 (as the data can be up to 9 bits in size).
+   - 2nd item: the list of individual data bits and their ss/es numbers.
  - 'PARITYBIT': The data is the (integer) value of the parity bit (0/1).
  - 'STOPBIT': The data is the (integer) value of the stop bit (0 or 1).
  - 'INVALID STARTBIT': The data is the (integer) value of the start bit (0/1).
@@ -102,7 +103,10 @@ class Decoder(srd.Decoder):
             'values': ('lsb-first', 'msb-first')},
         {'id': 'format', 'desc': 'Data format', 'default': 'ascii',
             'values': ('ascii', 'dec', 'hex', 'oct', 'bin')},
-        # TODO: Options to invert the signal(s).
+        {'id': 'invert_rx', 'desc': 'Invert RX?', 'default': 'no',
+            'values': ('yes', 'no')},
+        {'id': 'invert_tx', 'desc': 'Invert TX?', 'default': 'no',
+            'values': ('yes', 'no')},
     )
     annotations = (
         ('rx-data', 'RX data'),
@@ -260,8 +264,8 @@ class Decoder(srd.Decoder):
 
         self.state[rxtx] = 'GET PARITY BIT'
 
-        self.putpx(rxtx, ['DATABITS', rxtx, self.databits[rxtx]])
-        self.putpx(rxtx, ['DATA', rxtx, self.databyte[rxtx]])
+        self.putpx(rxtx, ['DATA', rxtx,
+            (self.databyte[rxtx], self.databits[rxtx])])
 
         b, f = self.databyte[rxtx], self.options['format']
         if f == 'ascii':
@@ -336,6 +340,11 @@ class Decoder(srd.Decoder):
             #     continue
             self.oldpins, (rx, tx) = pins, pins
 
+            if self.options['invert_rx'] == 'yes':
+                rx = not rx
+            if self.options['invert_tx'] == 'yes':
+                tx = not tx
+
             # Either RX or TX (but not both) can be omitted.
             has_pin = [rx in (0, 1), tx in (0, 1)]
             if has_pin == [False, False]: