- atten-pps3xxx
- baylibre-acme
- beaglelogic
- - brymen-dmm
- cem-dt-885x
- center-3xx (including all subdrivers)
- chronovu-la
- pce-322a
- pipistrello-ols
- rdtech-dps
+ - rigol-dg
- rigol-ds
- rohde-schwarz-sme-0x
- scpi-dmm
$ sigrok-cli --driver <somedriver>:conn=vxi/<ipaddr> ...
$ sigrok-cli --driver <somedriver>:conn=usbtmc/<bus>.<addr> ...
+Individual device drivers _may_ implement additional semantics for the
+conn= specification, which would not apply to other drivers, yet can be
+rather useful for a given type of device.
+
+ $ sigrok-cli --driver <somedriver>:conn=sn=<serno>
+
Specifying serial port parameters
---------------------------------
- GW Instek VCP: See the discussion on manual driver assignment to common
USB to UART chips with non-default USB identification.
- MASTECH MS6514: Press the "Setup/PC-Link" button for roughly 3 seconds.
+ - Meterman 38XR: Press the "RS232" button.
- Metrix MX56C: Press the PRINT button to have the meter send acquisition
data via IR. Hold the PRINT button to adjust the meter's transmission
interval.
$ sigrok-cli --driver ols:conn=/dev/ttyACM0 ...
+JTAGulator
+----------
+
+The Grand Idea Studio JTAGulator also implements the SUMP protocol and
+thus is covered by the OLS driver. See the vendor's wiki on details how
+to enable the Logic Analyzer mode of operation.
+
+ https://github.com/grandideastudio/jtagulator/wiki/Logic-Analyzer
+
+
Mooshimeter
-----------