-The capture is only partial, it contains 5 seconds of the write process
-(it does not contain the chip identification, chip erase, etc. which comes
-before the actual write parts; it also does not contain anything after those
-5 seconds, the flashrom command took quite a bit longer than 5 seconds).
+Reading
+-------
+
+The flashrom command line used was:
+
+ flashrom -p ft2232_spi:type=2232H,port=A -r dump.dd
+
+The sigrok command line used was:
+
+ sigrok-cli -d 0:samplerate=25mhz --samples 8388608 \
+ -p '1=CS#,2=MISO,3=SCLK,4=MOSI,5=WP#,6=HOLD#' \
+ -o mx25l1605d_read.sr
+
+The capture only contains a small part of the read procedure. The data in
+the chip consists of consecutive "HelloWorld" ASCII strings.
+
+
+Erasing
+-------
+
+The flashrom command line used was:
+
+ flashrom -p ft2232_spi:type=2232H,port=A -E
+
+The sigrok command line used was:
+
+ sigrok-cli -d 0:samplerate=25mhz --samples 8388608 \
+ -p '1=CS#,2=MISO,3=SCLK,4=MOSI,5=WP#,6=HOLD#' \
+ -o mx25l1605d_erase.sr
+
+The capture does not contain the full erase process, only a small part of it.