1 -------------------------------------------------------------------------------
2 TrekStor eBook Reader 3.0 UART
3 -------------------------------------------------------------------------------
5 This is an example capture of the serial (UART) bootloader/firmware output on
6 a TrekStor eBook Reader 3.0 EBR30-a (Weltbild + Hugendubel Edition).
8 For details on the device see:
10 http://randomprojects.org/wiki/TrekStor_eBook_Reader_3.0_EBR30-a_(Weltbild_%2B_Hugendubel_Edition)
12 The firmware sends the debug output at 115200 baud, with 8n1 settings.
18 The logic analyzer used was a ChronoVu LA8 (at 1MHz):
28 The sigrok command line used was:
30 sigrok-cli -d 0:samplerate=1mhz --samples 8388608 \
31 -p '1-8,2=TX' --wait-trigger --triggers 2=1 \
32 -o trekstor_ebr30_a_uart.sr
34 The capturing starts when the TX signal is high for the first time (it's low
35 before the device is powered-on). We capture as many samples as fit into the
36 8MByte buffer of the logic analyzer.
38 The capture does not contain the complete bootloader/firmware output.
42 http://randomprojects.org/wiki/TrekStor_eBook_Reader_3.0_EBR30-a_%28Weltbild_%2B_Hugendubel_Edition%29#UART