1 -------------------------------------------------------------------------------
3 -------------------------------------------------------------------------------
5 This is an example capture of some dummy I2C traffic, where the master writes
6 to a slave (an RTC) at address 0x51 (or 0x2a, if the read/write bit is
7 included) in an infinite loop. The slave does not respond.
13 The logic analyzer used was a ChronoVu LA8 (at 1MHz):
16 ------------------------
24 This is what the decoded data should look like:
26 - S Wr:0xa2 A 0x55 A 0x66 A P
28 - The abbreviations used above: S = Start, Wr = Write, A = ACK, P = Stop
30 The sigrok command line used was:
32 sigrok-cli -d 0:samplerate=1mhz --samples 8388608 \
33 -p '1=SCL,2=SDA' -o a2_dummy_write.sr