]>
Commit | Line | Data |
---|---|---|
1 | /* | |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2010-2012 Bert Vermeulen <bert@biot.com> | |
5 | * | |
6 | * This program is free software: you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation, either version 3 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
18 | */ | |
19 | ||
20 | #include "protocol.h" | |
21 | ||
22 | #define VENDOR_NAME "ZEROPLUS" | |
23 | #define USB_INTERFACE 0 | |
24 | #define USB_CONFIGURATION 1 | |
25 | #define NUM_TRIGGER_STAGES 4 | |
26 | #define PACKET_SIZE 2048 /* ?? */ | |
27 | ||
28 | //#define ZP_EXPERIMENTAL | |
29 | ||
30 | struct zp_model { | |
31 | uint16_t vid; | |
32 | uint16_t pid; | |
33 | char *model_name; | |
34 | unsigned int channels; | |
35 | unsigned int sample_depth; /* In Ksamples/channel */ | |
36 | unsigned int max_sampling_freq; | |
37 | }; | |
38 | ||
39 | /* | |
40 | * Note -- 16032, 16064 and 16128 *usually* -- but not always -- have the | |
41 | * same 128K sample depth. | |
42 | */ | |
43 | static const struct zp_model zeroplus_models[] = { | |
44 | {0x0c12, 0x7002, "LAP-16128U", 16, 128, 200}, | |
45 | {0x0c12, 0x7009, "LAP-C(16064)", 16, 64, 100}, | |
46 | {0x0c12, 0x700a, "LAP-C(16128)", 16, 128, 200}, | |
47 | {0x0c12, 0x700b, "LAP-C(32128)", 32, 128, 200}, | |
48 | {0x0c12, 0x700c, "LAP-C(321000)", 32, 1024, 200}, | |
49 | {0x0c12, 0x700d, "LAP-C(322000)", 32, 2048, 200}, | |
50 | {0x0c12, 0x700e, "LAP-C(16032)", 16, 32, 100}, | |
51 | {0x0c12, 0x7016, "LAP-C(162000)", 16, 2048, 200}, | |
52 | {0x0c12, 0x7100, "AKIP-9101", 16, 256, 200}, | |
53 | { 0, 0, 0, 0, 0, 0 } | |
54 | }; | |
55 | ||
56 | static const uint32_t devopts[] = { | |
57 | SR_CONF_LOGIC_ANALYZER, | |
58 | SR_CONF_LIMIT_SAMPLES | SR_CONF_SET | SR_CONF_LIST, | |
59 | SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
60 | SR_CONF_TRIGGER_MATCH | SR_CONF_LIST, | |
61 | SR_CONF_CAPTURE_RATIO | SR_CONF_GET | SR_CONF_SET, | |
62 | SR_CONF_VOLTAGE_THRESHOLD | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
63 | }; | |
64 | ||
65 | static const int32_t trigger_matches[] = { | |
66 | SR_TRIGGER_ZERO, | |
67 | SR_TRIGGER_ONE, | |
68 | }; | |
69 | ||
70 | /* | |
71 | * ZEROPLUS LAP-C (16032) numbers the 16 channels A0-A7 and B0-B7. | |
72 | * We currently ignore other untested/unsupported devices here. | |
73 | */ | |
74 | static const char *channel_names[] = { | |
75 | "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", | |
76 | "B0", "B1", "B2", "B3", "B4", "B5", "B6", "B7", | |
77 | "C0", "C1", "C2", "C3", "C4", "C5", "C6", "C7", | |
78 | "D0", "D1", "D2", "D3", "D4", "D5", "D6", "D7", | |
79 | NULL, | |
80 | }; | |
81 | ||
82 | SR_PRIV struct sr_dev_driver zeroplus_logic_cube_driver_info; | |
83 | ||
84 | /* | |
85 | * The hardware supports more samplerates than these, but these are the | |
86 | * options hardcoded into the vendor's Windows GUI. | |
87 | */ | |
88 | ||
89 | static const uint64_t samplerates_100[] = { | |
90 | SR_HZ(100), | |
91 | SR_HZ(500), | |
92 | SR_KHZ(1), | |
93 | SR_KHZ(5), | |
94 | SR_KHZ(25), | |
95 | SR_KHZ(50), | |
96 | SR_KHZ(100), | |
97 | SR_KHZ(200), | |
98 | SR_KHZ(400), | |
99 | SR_KHZ(800), | |
100 | SR_MHZ(1), | |
101 | SR_MHZ(10), | |
102 | SR_MHZ(25), | |
103 | SR_MHZ(50), | |
104 | SR_MHZ(80), | |
105 | SR_MHZ(100), | |
106 | }; | |
107 | ||
108 | const uint64_t samplerates_200[] = { | |
109 | SR_HZ(100), | |
110 | SR_HZ(500), | |
111 | SR_KHZ(1), | |
112 | SR_KHZ(5), | |
113 | SR_KHZ(25), | |
114 | SR_KHZ(50), | |
115 | SR_KHZ(100), | |
116 | SR_KHZ(200), | |
117 | SR_KHZ(400), | |
118 | SR_KHZ(800), | |
119 | SR_MHZ(1), | |
120 | SR_MHZ(10), | |
121 | SR_MHZ(25), | |
122 | SR_MHZ(50), | |
123 | SR_MHZ(80), | |
124 | SR_MHZ(100), | |
125 | SR_MHZ(150), | |
126 | SR_MHZ(200), | |
127 | }; | |
128 | ||
129 | static int dev_close(struct sr_dev_inst *sdi); | |
130 | ||
131 | SR_PRIV int zp_set_samplerate(struct dev_context *devc, uint64_t samplerate) | |
132 | { | |
133 | int i; | |
134 | ||
135 | for (i = 0; ARRAY_SIZE(samplerates_200); i++) | |
136 | if (samplerate == samplerates_200[i]) | |
137 | break; | |
138 | ||
139 | if (i == ARRAY_SIZE(samplerates_200) || samplerate > devc->max_samplerate) { | |
140 | sr_err("Unsupported samplerate: %" PRIu64 "Hz.", samplerate); | |
141 | return SR_ERR_ARG; | |
142 | } | |
143 | ||
144 | sr_info("Setting samplerate to %" PRIu64 "Hz.", samplerate); | |
145 | ||
146 | if (samplerate >= SR_MHZ(1)) | |
147 | analyzer_set_freq(samplerate / SR_MHZ(1), FREQ_SCALE_MHZ); | |
148 | else if (samplerate >= SR_KHZ(1)) | |
149 | analyzer_set_freq(samplerate / SR_KHZ(1), FREQ_SCALE_KHZ); | |
150 | else | |
151 | analyzer_set_freq(samplerate, FREQ_SCALE_HZ); | |
152 | ||
153 | devc->cur_samplerate = samplerate; | |
154 | ||
155 | return SR_OK; | |
156 | } | |
157 | ||
158 | static int init(struct sr_dev_driver *di, struct sr_context *sr_ctx) | |
159 | { | |
160 | return std_init(sr_ctx, di, LOG_PREFIX); | |
161 | } | |
162 | ||
163 | static GSList *scan(struct sr_dev_driver *di, GSList *options) | |
164 | { | |
165 | struct sr_dev_inst *sdi; | |
166 | struct drv_context *drvc; | |
167 | struct dev_context *devc; | |
168 | const struct zp_model *prof; | |
169 | struct libusb_device_descriptor des; | |
170 | struct libusb_device_handle *hdl; | |
171 | libusb_device **devlist; | |
172 | GSList *devices; | |
173 | int ret, i, j; | |
174 | char serial_num[64], connection_id[64]; | |
175 | ||
176 | (void)options; | |
177 | ||
178 | drvc = di->priv; | |
179 | ||
180 | devices = NULL; | |
181 | ||
182 | /* Find all ZEROPLUS analyzers and add them to device list. */ | |
183 | libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist); /* TODO: Errors. */ | |
184 | ||
185 | for (i = 0; devlist[i]; i++) { | |
186 | ret = libusb_get_device_descriptor(devlist[i], &des); | |
187 | if (ret != 0) { | |
188 | sr_err("Failed to get device descriptor: %s.", | |
189 | libusb_error_name(ret)); | |
190 | continue; | |
191 | } | |
192 | ||
193 | if ((ret = libusb_open(devlist[i], &hdl)) < 0) | |
194 | continue; | |
195 | ||
196 | if (des.iSerialNumber == 0) { | |
197 | serial_num[0] = '\0'; | |
198 | } else if ((ret = libusb_get_string_descriptor_ascii(hdl, | |
199 | des.iSerialNumber, (unsigned char *) serial_num, | |
200 | sizeof(serial_num))) < 0) { | |
201 | sr_warn("Failed to get serial number string descriptor: %s.", | |
202 | libusb_error_name(ret)); | |
203 | continue; | |
204 | } | |
205 | ||
206 | libusb_close(hdl); | |
207 | ||
208 | usb_get_port_path(devlist[i], connection_id, sizeof(connection_id)); | |
209 | ||
210 | prof = NULL; | |
211 | for (j = 0; j < zeroplus_models[j].vid; j++) { | |
212 | if (des.idVendor == zeroplus_models[j].vid && | |
213 | des.idProduct == zeroplus_models[j].pid) { | |
214 | prof = &zeroplus_models[j]; | |
215 | } | |
216 | } | |
217 | /* Skip if the device was not found. */ | |
218 | if (!prof) | |
219 | continue; | |
220 | sr_info("Found ZEROPLUS %s.", prof->model_name); | |
221 | ||
222 | /* Register the device with libsigrok. */ | |
223 | sdi = g_malloc0(sizeof(struct sr_dev_inst)); | |
224 | sdi->status = SR_ST_INACTIVE; | |
225 | sdi->vendor = g_strdup(VENDOR_NAME); | |
226 | sdi->model = g_strdup(prof->model_name); | |
227 | sdi->driver = di; | |
228 | sdi->serial_num = g_strdup(serial_num); | |
229 | sdi->connection_id = g_strdup(connection_id); | |
230 | ||
231 | /* Allocate memory for our private driver context. */ | |
232 | devc = g_malloc0(sizeof(struct dev_context)); | |
233 | sdi->priv = devc; | |
234 | devc->prof = prof; | |
235 | devc->num_channels = prof->channels; | |
236 | #ifdef ZP_EXPERIMENTAL | |
237 | devc->max_sample_depth = 128 * 1024; | |
238 | devc->max_samplerate = 200; | |
239 | #else | |
240 | devc->max_sample_depth = prof->sample_depth * 1024; | |
241 | devc->max_samplerate = prof->max_sampling_freq; | |
242 | #endif | |
243 | devc->max_samplerate *= SR_MHZ(1); | |
244 | devc->memory_size = MEMORY_SIZE_8K; | |
245 | // memset(devc->trigger_buffer, 0, NUM_TRIGGER_STAGES); | |
246 | ||
247 | /* Fill in channellist according to this device's profile. */ | |
248 | for (j = 0; j < devc->num_channels; j++) | |
249 | sr_channel_new(sdi, j, SR_CHANNEL_LOGIC, TRUE, | |
250 | channel_names[j]); | |
251 | ||
252 | devices = g_slist_append(devices, sdi); | |
253 | drvc->instances = g_slist_append(drvc->instances, sdi); | |
254 | sdi->inst_type = SR_INST_USB; | |
255 | sdi->conn = sr_usb_dev_inst_new( | |
256 | libusb_get_bus_number(devlist[i]), | |
257 | libusb_get_device_address(devlist[i]), NULL); | |
258 | } | |
259 | libusb_free_device_list(devlist, 1); | |
260 | ||
261 | return devices; | |
262 | } | |
263 | ||
264 | static GSList *dev_list(const struct sr_dev_driver *di) | |
265 | { | |
266 | return ((struct drv_context *)(di->priv))->instances; | |
267 | } | |
268 | ||
269 | static int dev_open(struct sr_dev_inst *sdi) | |
270 | { | |
271 | struct sr_dev_driver *di = sdi->driver; | |
272 | struct dev_context *devc; | |
273 | struct drv_context *drvc; | |
274 | struct sr_usb_dev_inst *usb; | |
275 | libusb_device **devlist, *dev; | |
276 | int device_count, ret, i; | |
277 | char connection_id[64]; | |
278 | ||
279 | drvc = di->priv; | |
280 | usb = sdi->conn; | |
281 | ||
282 | if (!(devc = sdi->priv)) { | |
283 | sr_err("%s: sdi->priv was NULL", __func__); | |
284 | return SR_ERR_ARG; | |
285 | } | |
286 | ||
287 | device_count = libusb_get_device_list(drvc->sr_ctx->libusb_ctx, | |
288 | &devlist); | |
289 | if (device_count < 0) { | |
290 | sr_err("Failed to retrieve device list."); | |
291 | return SR_ERR; | |
292 | } | |
293 | ||
294 | dev = NULL; | |
295 | for (i = 0; i < device_count; i++) { | |
296 | usb_get_port_path(devlist[i], connection_id, sizeof(connection_id)); | |
297 | if (!strcmp(sdi->connection_id, connection_id)) { | |
298 | dev = devlist[i]; | |
299 | break; | |
300 | } | |
301 | } | |
302 | if (!dev) { | |
303 | sr_err("Device on %d.%d (logical) / %s (physical) disappeared!", | |
304 | usb->bus, usb->address, sdi->connection_id); | |
305 | return SR_ERR; | |
306 | } | |
307 | ||
308 | if (!(ret = libusb_open(dev, &(usb->devhdl)))) { | |
309 | sdi->status = SR_ST_ACTIVE; | |
310 | sr_info("Opened device on %d.%d (logical) / %s (physical) interface %d.", | |
311 | usb->bus, usb->address, sdi->connection_id, USB_INTERFACE); | |
312 | } else { | |
313 | sr_err("Failed to open device: %s.", libusb_error_name(ret)); | |
314 | return SR_ERR; | |
315 | } | |
316 | ||
317 | ret = libusb_set_configuration(usb->devhdl, USB_CONFIGURATION); | |
318 | if (ret < 0) { | |
319 | sr_err("Unable to set USB configuration %d: %s.", | |
320 | USB_CONFIGURATION, libusb_error_name(ret)); | |
321 | return SR_ERR; | |
322 | } | |
323 | ||
324 | ret = libusb_claim_interface(usb->devhdl, USB_INTERFACE); | |
325 | if (ret != 0) { | |
326 | sr_err("Unable to claim interface: %s.", | |
327 | libusb_error_name(ret)); | |
328 | return SR_ERR; | |
329 | } | |
330 | ||
331 | /* Set default configuration after power on. */ | |
332 | if (analyzer_read_status(usb->devhdl) == 0) | |
333 | analyzer_configure(usb->devhdl); | |
334 | ||
335 | analyzer_reset(usb->devhdl); | |
336 | analyzer_initialize(usb->devhdl); | |
337 | ||
338 | //analyzer_set_memory_size(MEMORY_SIZE_512K); | |
339 | // analyzer_set_freq(g_freq, g_freq_scale); | |
340 | analyzer_set_trigger_count(1); | |
341 | // analyzer_set_ramsize_trigger_address((((100 - g_pre_trigger) | |
342 | // * get_memory_size(g_memory_size)) / 100) >> 2); | |
343 | ||
344 | #if 0 | |
345 | if (g_double_mode == 1) | |
346 | analyzer_set_compression(COMPRESSION_DOUBLE); | |
347 | else if (g_compression == 1) | |
348 | analyzer_set_compression(COMPRESSION_ENABLE); | |
349 | else | |
350 | #endif | |
351 | analyzer_set_compression(COMPRESSION_NONE); | |
352 | ||
353 | if (devc->cur_samplerate == 0) { | |
354 | /* Samplerate hasn't been set. Default to 1MHz. */ | |
355 | analyzer_set_freq(1, FREQ_SCALE_MHZ); | |
356 | devc->cur_samplerate = SR_MHZ(1); | |
357 | } | |
358 | ||
359 | if (devc->cur_threshold == 0) | |
360 | set_voltage_threshold(devc, 1.5); | |
361 | ||
362 | return SR_OK; | |
363 | } | |
364 | ||
365 | static int dev_close(struct sr_dev_inst *sdi) | |
366 | { | |
367 | struct sr_usb_dev_inst *usb; | |
368 | ||
369 | usb = sdi->conn; | |
370 | ||
371 | if (!usb->devhdl) | |
372 | return SR_ERR; | |
373 | ||
374 | sr_info("Closing device on %d.%d (logical) / %s (physical) interface %d.", | |
375 | usb->bus, usb->address, sdi->connection_id, USB_INTERFACE); | |
376 | libusb_release_interface(usb->devhdl, USB_INTERFACE); | |
377 | libusb_reset_device(usb->devhdl); | |
378 | libusb_close(usb->devhdl); | |
379 | usb->devhdl = NULL; | |
380 | sdi->status = SR_ST_INACTIVE; | |
381 | ||
382 | return SR_OK; | |
383 | } | |
384 | ||
385 | static int cleanup(const struct sr_dev_driver *di) | |
386 | { | |
387 | return std_dev_clear(di, NULL); | |
388 | } | |
389 | ||
390 | static int config_get(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi, | |
391 | const struct sr_channel_group *cg) | |
392 | { | |
393 | struct dev_context *devc; | |
394 | ||
395 | (void)cg; | |
396 | ||
397 | switch (key) { | |
398 | case SR_CONF_SAMPLERATE: | |
399 | if (sdi) { | |
400 | devc = sdi->priv; | |
401 | *data = g_variant_new_uint64(devc->cur_samplerate); | |
402 | sr_spew("Returning samplerate: %" PRIu64 "Hz.", | |
403 | devc->cur_samplerate); | |
404 | } else | |
405 | return SR_ERR_ARG; | |
406 | break; | |
407 | case SR_CONF_CAPTURE_RATIO: | |
408 | if (sdi) { | |
409 | devc = sdi->priv; | |
410 | *data = g_variant_new_uint64(devc->capture_ratio); | |
411 | } else | |
412 | return SR_ERR_ARG; | |
413 | break; | |
414 | case SR_CONF_VOLTAGE_THRESHOLD: | |
415 | if (sdi) { | |
416 | GVariant *range[2]; | |
417 | devc = sdi->priv; | |
418 | range[0] = g_variant_new_double(devc->cur_threshold); | |
419 | range[1] = g_variant_new_double(devc->cur_threshold); | |
420 | *data = g_variant_new_tuple(range, 2); | |
421 | } else | |
422 | return SR_ERR_ARG; | |
423 | break; | |
424 | default: | |
425 | return SR_ERR_NA; | |
426 | } | |
427 | ||
428 | return SR_OK; | |
429 | } | |
430 | ||
431 | static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sdi, | |
432 | const struct sr_channel_group *cg) | |
433 | { | |
434 | struct dev_context *devc; | |
435 | gdouble low, high; | |
436 | ||
437 | (void)cg; | |
438 | ||
439 | if (sdi->status != SR_ST_ACTIVE) | |
440 | return SR_ERR_DEV_CLOSED; | |
441 | ||
442 | if (!(devc = sdi->priv)) { | |
443 | sr_err("%s: sdi->priv was NULL", __func__); | |
444 | return SR_ERR_ARG; | |
445 | } | |
446 | ||
447 | switch (key) { | |
448 | case SR_CONF_SAMPLERATE: | |
449 | return zp_set_samplerate(devc, g_variant_get_uint64(data)); | |
450 | case SR_CONF_LIMIT_SAMPLES: | |
451 | return set_limit_samples(devc, g_variant_get_uint64(data)); | |
452 | case SR_CONF_CAPTURE_RATIO: | |
453 | return set_capture_ratio(devc, g_variant_get_uint64(data)); | |
454 | case SR_CONF_VOLTAGE_THRESHOLD: | |
455 | g_variant_get(data, "(dd)", &low, &high); | |
456 | return set_voltage_threshold(devc, (low + high) / 2.0); | |
457 | default: | |
458 | return SR_ERR_NA; | |
459 | } | |
460 | ||
461 | return SR_OK; | |
462 | } | |
463 | ||
464 | static int config_list(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi, | |
465 | const struct sr_channel_group *cg) | |
466 | { | |
467 | struct dev_context *devc; | |
468 | GVariant *gvar, *grange[2]; | |
469 | GVariantBuilder gvb; | |
470 | double v; | |
471 | GVariant *range[2]; | |
472 | ||
473 | (void)cg; | |
474 | ||
475 | switch (key) { | |
476 | case SR_CONF_DEVICE_OPTIONS: | |
477 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, | |
478 | devopts, ARRAY_SIZE(devopts), sizeof(uint32_t)); | |
479 | break; | |
480 | case SR_CONF_SAMPLERATE: | |
481 | devc = sdi->priv; | |
482 | g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}")); | |
483 | if (devc->prof->max_sampling_freq == 100) { | |
484 | gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), | |
485 | samplerates_100, ARRAY_SIZE(samplerates_100), | |
486 | sizeof(uint64_t)); | |
487 | } else if (devc->prof->max_sampling_freq == 200) { | |
488 | gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), | |
489 | samplerates_200, ARRAY_SIZE(samplerates_200), | |
490 | sizeof(uint64_t)); | |
491 | } else { | |
492 | sr_err("Internal error: Unknown max. samplerate: %d.", | |
493 | devc->prof->max_sampling_freq); | |
494 | return SR_ERR_ARG; | |
495 | } | |
496 | g_variant_builder_add(&gvb, "{sv}", "samplerates", gvar); | |
497 | *data = g_variant_builder_end(&gvb); | |
498 | break; | |
499 | case SR_CONF_TRIGGER_MATCH: | |
500 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32, | |
501 | trigger_matches, ARRAY_SIZE(trigger_matches), | |
502 | sizeof(int32_t)); | |
503 | break; | |
504 | case SR_CONF_VOLTAGE_THRESHOLD: | |
505 | g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY); | |
506 | for (v = -6.0; v <= 6.0; v += 0.1) { | |
507 | range[0] = g_variant_new_double(v); | |
508 | range[1] = g_variant_new_double(v); | |
509 | gvar = g_variant_new_tuple(range, 2); | |
510 | g_variant_builder_add_value(&gvb, gvar); | |
511 | } | |
512 | *data = g_variant_builder_end(&gvb); | |
513 | break; | |
514 | case SR_CONF_LIMIT_SAMPLES: | |
515 | if (!sdi) | |
516 | return SR_ERR_ARG; | |
517 | devc = sdi->priv; | |
518 | grange[0] = g_variant_new_uint64(0); | |
519 | grange[1] = g_variant_new_uint64(devc->max_sample_depth); | |
520 | *data = g_variant_new_tuple(grange, 2); | |
521 | break; | |
522 | default: | |
523 | return SR_ERR_NA; | |
524 | } | |
525 | ||
526 | return SR_OK; | |
527 | } | |
528 | ||
529 | static int dev_acquisition_start(const struct sr_dev_inst *sdi, | |
530 | void *cb_data) | |
531 | { | |
532 | struct dev_context *devc; | |
533 | struct sr_usb_dev_inst *usb; | |
534 | struct sr_datafeed_packet packet; | |
535 | struct sr_datafeed_logic logic; | |
536 | unsigned int samples_read; | |
537 | int res; | |
538 | unsigned int packet_num, n; | |
539 | unsigned char *buf; | |
540 | unsigned int status; | |
541 | unsigned int stop_address; | |
542 | unsigned int now_address; | |
543 | unsigned int trigger_address; | |
544 | unsigned int trigger_offset; | |
545 | unsigned int triggerbar; | |
546 | unsigned int ramsize_trigger; | |
547 | unsigned int memory_size; | |
548 | unsigned int valid_samples; | |
549 | unsigned int discard; | |
550 | int trigger_now; | |
551 | ||
552 | if (sdi->status != SR_ST_ACTIVE) | |
553 | return SR_ERR_DEV_CLOSED; | |
554 | ||
555 | if (!(devc = sdi->priv)) { | |
556 | sr_err("%s: sdi->priv was NULL", __func__); | |
557 | return SR_ERR_ARG; | |
558 | } | |
559 | ||
560 | if (analyzer_add_triggers(sdi) != SR_OK) { | |
561 | sr_err("Failed to configure triggers."); | |
562 | return SR_ERR; | |
563 | } | |
564 | ||
565 | usb = sdi->conn; | |
566 | ||
567 | set_triggerbar(devc); | |
568 | ||
569 | /* Push configured settings to device. */ | |
570 | analyzer_configure(usb->devhdl); | |
571 | ||
572 | analyzer_start(usb->devhdl); | |
573 | sr_info("Waiting for data."); | |
574 | analyzer_wait_data(usb->devhdl); | |
575 | ||
576 | status = analyzer_read_status(usb->devhdl); | |
577 | stop_address = analyzer_get_stop_address(usb->devhdl); | |
578 | now_address = analyzer_get_now_address(usb->devhdl); | |
579 | trigger_address = analyzer_get_trigger_address(usb->devhdl); | |
580 | ||
581 | triggerbar = analyzer_get_triggerbar_address(); | |
582 | ramsize_trigger = analyzer_get_ramsize_trigger_address(); | |
583 | ||
584 | n = get_memory_size(devc->memory_size); | |
585 | memory_size = n / 4; | |
586 | ||
587 | sr_info("Status = 0x%x.", status); | |
588 | sr_info("Stop address = 0x%x.", stop_address); | |
589 | sr_info("Now address = 0x%x.", now_address); | |
590 | sr_info("Trigger address = 0x%x.", trigger_address); | |
591 | sr_info("Triggerbar address = 0x%x.", triggerbar); | |
592 | sr_info("Ramsize trigger = 0x%x.", ramsize_trigger); | |
593 | sr_info("Memory size = 0x%x.", memory_size); | |
594 | ||
595 | /* Send header packet to the session bus. */ | |
596 | std_session_send_df_header(cb_data, LOG_PREFIX); | |
597 | ||
598 | /* Check for empty capture */ | |
599 | if ((status & STATUS_READY) && !stop_address) { | |
600 | packet.type = SR_DF_END; | |
601 | sr_session_send(cb_data, &packet); | |
602 | return SR_OK; | |
603 | } | |
604 | ||
605 | if (!(buf = g_try_malloc(PACKET_SIZE))) { | |
606 | sr_err("Packet buffer malloc failed."); | |
607 | return SR_ERR_MALLOC; | |
608 | } | |
609 | ||
610 | /* Check if the trigger is in the samples we are throwing away */ | |
611 | trigger_now = now_address == trigger_address || | |
612 | ((now_address + 1) % memory_size) == trigger_address; | |
613 | ||
614 | /* | |
615 | * STATUS_READY doesn't clear until now_address advances past | |
616 | * addr 0, but for our logic, clear it in that case | |
617 | */ | |
618 | if (!now_address) | |
619 | status &= ~STATUS_READY; | |
620 | ||
621 | analyzer_read_start(usb->devhdl); | |
622 | ||
623 | /* Calculate how much data to discard */ | |
624 | discard = 0; | |
625 | if (status & STATUS_READY) { | |
626 | /* | |
627 | * We haven't wrapped around, we need to throw away data from | |
628 | * our current position to the end of the buffer. | |
629 | * Additionally, the first two samples captured are always | |
630 | * bogus. | |
631 | */ | |
632 | discard += memory_size - now_address + 2; | |
633 | now_address = 2; | |
634 | } | |
635 | ||
636 | /* If we have more samples than we need, discard them */ | |
637 | valid_samples = (stop_address - now_address) % memory_size; | |
638 | if (valid_samples > ramsize_trigger + triggerbar) { | |
639 | discard += valid_samples - (ramsize_trigger + triggerbar); | |
640 | now_address += valid_samples - (ramsize_trigger + triggerbar); | |
641 | } | |
642 | ||
643 | sr_info("Need to discard %d samples.", discard); | |
644 | ||
645 | /* Calculate how far in the trigger is */ | |
646 | if (trigger_now) | |
647 | trigger_offset = 0; | |
648 | else | |
649 | trigger_offset = (trigger_address - now_address) % memory_size; | |
650 | ||
651 | /* Recalculate the number of samples available */ | |
652 | valid_samples = (stop_address - now_address) % memory_size; | |
653 | ||
654 | /* Send the incoming transfer to the session bus. */ | |
655 | samples_read = 0; | |
656 | for (packet_num = 0; packet_num < n / PACKET_SIZE; packet_num++) { | |
657 | unsigned int len; | |
658 | unsigned int buf_offset; | |
659 | ||
660 | res = analyzer_read_data(usb->devhdl, buf, PACKET_SIZE); | |
661 | sr_info("Tried to read %d bytes, actually read %d bytes.", | |
662 | PACKET_SIZE, res); | |
663 | ||
664 | if (discard >= PACKET_SIZE / 4) { | |
665 | discard -= PACKET_SIZE / 4; | |
666 | continue; | |
667 | } | |
668 | ||
669 | len = PACKET_SIZE - discard * 4; | |
670 | buf_offset = discard * 4; | |
671 | discard = 0; | |
672 | ||
673 | /* Check if we've read all the samples */ | |
674 | if (samples_read + len / 4 >= valid_samples) | |
675 | len = (valid_samples - samples_read) * 4; | |
676 | if (!len) | |
677 | break; | |
678 | ||
679 | if (samples_read < trigger_offset && | |
680 | samples_read + len / 4 > trigger_offset) { | |
681 | /* Send out samples remaining before trigger */ | |
682 | packet.type = SR_DF_LOGIC; | |
683 | packet.payload = &logic; | |
684 | logic.length = (trigger_offset - samples_read) * 4; | |
685 | logic.unitsize = 4; | |
686 | logic.data = buf + buf_offset; | |
687 | sr_session_send(cb_data, &packet); | |
688 | len -= logic.length; | |
689 | samples_read += logic.length / 4; | |
690 | buf_offset += logic.length; | |
691 | } | |
692 | ||
693 | if (samples_read == trigger_offset) { | |
694 | /* Send out trigger */ | |
695 | packet.type = SR_DF_TRIGGER; | |
696 | packet.payload = NULL; | |
697 | sr_session_send(cb_data, &packet); | |
698 | } | |
699 | ||
700 | /* Send out data (or data after trigger) */ | |
701 | packet.type = SR_DF_LOGIC; | |
702 | packet.payload = &logic; | |
703 | logic.length = len; | |
704 | logic.unitsize = 4; | |
705 | logic.data = buf + buf_offset; | |
706 | sr_session_send(cb_data, &packet); | |
707 | samples_read += len / 4; | |
708 | } | |
709 | analyzer_read_stop(usb->devhdl); | |
710 | g_free(buf); | |
711 | ||
712 | packet.type = SR_DF_END; | |
713 | sr_session_send(cb_data, &packet); | |
714 | ||
715 | return SR_OK; | |
716 | } | |
717 | ||
718 | /* TODO: This stops acquisition on ALL devices, ignoring dev_index. */ | |
719 | static int dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data) | |
720 | { | |
721 | struct dev_context *devc; | |
722 | struct sr_usb_dev_inst *usb; | |
723 | struct sr_datafeed_packet packet; | |
724 | ||
725 | packet.type = SR_DF_END; | |
726 | sr_session_send(cb_data, &packet); | |
727 | ||
728 | if (!(devc = sdi->priv)) { | |
729 | sr_err("%s: sdi->priv was NULL", __func__); | |
730 | return SR_ERR_BUG; | |
731 | } | |
732 | ||
733 | usb = sdi->conn; | |
734 | analyzer_reset(usb->devhdl); | |
735 | /* TODO: Need to cancel and free any queued up transfers. */ | |
736 | ||
737 | return SR_OK; | |
738 | } | |
739 | ||
740 | SR_PRIV struct sr_dev_driver zeroplus_logic_cube_driver_info = { | |
741 | .name = "zeroplus-logic-cube", | |
742 | .longname = "ZEROPLUS Logic Cube LAP-C series", | |
743 | .api_version = 1, | |
744 | .init = init, | |
745 | .cleanup = cleanup, | |
746 | .scan = scan, | |
747 | .dev_list = dev_list, | |
748 | .dev_clear = NULL, | |
749 | .config_get = config_get, | |
750 | .config_set = config_set, | |
751 | .config_list = config_list, | |
752 | .dev_open = dev_open, | |
753 | .dev_close = dev_close, | |
754 | .dev_acquisition_start = dev_acquisition_start, | |
755 | .dev_acquisition_stop = dev_acquisition_stop, | |
756 | .priv = NULL, | |
757 | }; |