[sigrok-dumps.git] / i2c / trekstor_ebr30_a / README

-------------------------------------------------------------------------------
TrekStor eBook Reader 3.0 I2C
-------------------------------------------------------------------------------

This is a set of example captures of the I2C traffic on a TrekStor eBook
Reader 3.0 EBR30-a (Weltbild + Hugendubel Edition) device.

For details on the device see:

  http://randomprojects.org/wiki/TrekStor_eBook_Reader_3.0_EBR30-a_(Weltbild_%2B_Hugendubel_Edition)

There are three chips which are connected to the main CPU's SCL/SDA pins:

 - Battery management chip: X-Powers AXP199

 - RTC chip: Hec Semiconductor H8563S

 - Digital Thermal Orientation Sensor (DTOS): MEMSIC MXC6225XU


trekstor_ebr30_a_i2c_0x15.sr
----------------------------

The logic analyzer used was a ChronoVu LA8 (at 4MHz):

  Probe       I2C pin
  -------------------
  1 (orange)  SCL
  7 (yellow)  SDA

The sigrok command line used was:

  sigrok-cli -d 0:samplerate=4mhz --samples 8388608 \
             -p '2=SCL,8=SDA' -o trekstor_ebr30_a_i2c_0x15.sr


trekstor_ebr30_a_i2c_30s.sr and trekstor_ebr30_a_i2c_120s.sr
------------------------------------------------------------

This is a 30s/120s dump of the I2C traffic while the device was attached
to USB.

The logic analyzer used was a Saleae Logic (at 4MHz):

  Probe       I2C pin
  -------------------
  4 (orange)  SCL
  6 (green)   SDA

The sigrok command line used was:

  sigrok-cli -d 0:samplerate=4mhz --time <time>
             -p '4=SCL,6=SDA' -o <filename.sr>

(<time> was 30s or 120s)
Commit	Line	Data
	1	-------------------------------------------------------------------------------
	2	TrekStor eBook Reader 3.0 I2C
	3	-------------------------------------------------------------------------------
	4
	5	This is a set of example captures of the I2C traffic on a TrekStor eBook
	6	Reader 3.0 EBR30-a (Weltbild + Hugendubel Edition) device.
	7
	8	For details on the device see:
	9
	10	http://randomprojects.org/wiki/TrekStor_eBook_Reader_3.0_EBR30-a_(Weltbild_%2B_Hugendubel_Edition)
	11
	12	There are three chips which are connected to the main CPU's SCL/SDA pins:
	13
	14	- Battery management chip: X-Powers AXP199
	15
	16	- RTC chip: Hec Semiconductor H8563S
	17
	18	- Digital Thermal Orientation Sensor (DTOS): MEMSIC MXC6225XU
	19
	20
	21	trekstor_ebr30_a_i2c_0x15.sr
	22	----------------------------
	23
	24	The logic analyzer used was a ChronoVu LA8 (at 4MHz):
	25
	26	Probe I2C pin
	27	-------------------
	28	1 (orange) SCL
	29	7 (yellow) SDA
	30
	31	The sigrok command line used was:
	32
	33	sigrok-cli -d 0:samplerate=4mhz --samples 8388608 \
	34	-p '2=SCL,8=SDA' -o trekstor_ebr30_a_i2c_0x15.sr
	35
	36
	37	trekstor_ebr30_a_i2c_30s.sr and trekstor_ebr30_a_i2c_120s.sr
	38	------------------------------------------------------------
	39
	40	This is a 30s/120s dump of the I2C traffic while the device was attached
	41	to USB.
	42
	43	The logic analyzer used was a Saleae Logic (at 4MHz):
	44
	45	Probe I2C pin
	46	-------------------
	47	4 (orange) SCL
	48	6 (green) SDA
	49
	50	The sigrok command line used was:
	51
	52	sigrok-cli -d 0:samplerate=4mhz --time <time>
	53	-p '4=SCL,6=SDA' -o <filename.sr>
	54
	55	(<time> was 30s or 120s)
	56