]>
Commit | Line | Data |
---|---|---|
79edccdc | 1 | ------------------------------------------------------------------------------- |
398ac04e | 2 | Cyrustek ES51978 based multimeter, serial communication |
79edccdc AJ |
3 | ------------------------------------------------------------------------------- |
4 | ||
5 | This is a set of example captures of the serial (UART) communication and | |
6 | its timings on an optical RS232 cable for the ISO-TECH IDM103N digital | |
7 | multimeter based on the Cyrustek ES51978 chip. | |
8 | ||
9 | The UART parameters are 2400 baud, with 7e1 settings. | |
10 | ||
11 | Details: | |
12 | http://www.cyrustek.com.tw/spec/ES51978.pdf | |
13 | ||
14 | ||
15 | Logic analyzer setup | |
16 | -------------------- | |
17 | ||
980c65cc | 18 | The logic analyzer used was an OpenBench Logic Sniffer (at 100kHz): |
79edccdc | 19 | |
398ac04e UH |
20 | Probe RS232 cable |
21 | ----------------------- | |
79edccdc AJ |
22 | 0 RX |
23 | ||
24 | ||
25 | Data | |
26 | ---- | |
27 | ||
980c65cc | 28 | Contains 3 samples sent by the multimeter set in resistance mode, measuring |
79edccdc AJ |
29 | skin resistance, a few Mega Ohm. |
30 | ||
31 | The sigrok command line used was: | |
32 | ||
33 | sigrok-cli -d ols:conn=/dev/ttyACM0 -c samplerate=100khz:rle=1 \ | |
34 | -p 0=RX -t RX=0 -o es51978.sr --samples=245760 |