]>
Commit | Line | Data |
---|---|---|
b9d53092 BV |
1 | /* |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2013 Bert Vermeulen <bert@biot.com> | |
5 | * Copyright (C) 2012 Joel Holdsworth <joel@airwebreathe.org.uk> | |
6 | * | |
7 | * This program is free software: you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License as published by | |
9 | * the Free Software Foundation, either version 3 of the License, or | |
10 | * (at your option) any later version. | |
11 | * | |
12 | * This program is distributed in the hope that it will be useful, | |
13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | * GNU General Public License for more details. | |
16 | * | |
17 | * You should have received a copy of the GNU General Public License | |
18 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
19 | */ | |
20 | ||
21 | #include <sys/types.h> | |
22 | #include <sys/stat.h> | |
23 | #include <unistd.h> | |
24 | #include <errno.h> | |
25 | #include <math.h> | |
26 | #include <glib.h> | |
27 | #include <glib/gstdio.h> | |
28 | #include "protocol.h" | |
29 | #include "dslogic.h" | |
30 | ||
1a46cc62 UH |
31 | #define FW_BUFSIZE (4 * 1024) |
32 | ||
b9d53092 BV |
33 | int dslogic_fpga_firmware_upload(const struct sr_dev_inst *sdi, |
34 | const char *filename) | |
35 | { | |
36 | FILE *fw; | |
37 | struct stat st; | |
38 | struct sr_usb_dev_inst *usb; | |
39 | int chunksize, result, ret; | |
40 | unsigned char *buf; | |
41 | int sum, transferred; | |
42 | ||
43 | sr_dbg("Uploading FPGA firmware at %s.", filename); | |
44 | ||
45 | usb = sdi->conn; | |
46 | if (stat(filename, &st) < 0) { | |
47 | sr_err("Unable to upload FPGA firmware: %s", strerror(errno)); | |
48 | return SR_ERR; | |
49 | } | |
50 | ||
51 | /* Tell the device firmware is coming. */ | |
52 | if ((ret = libusb_control_transfer(usb->devhdl, LIBUSB_REQUEST_TYPE_VENDOR | | |
53 | LIBUSB_ENDPOINT_OUT, DS_CMD_FPGA_FW, 0x0000, 0x0000, | |
54 | NULL, 0, 3000)) < 0) { | |
55 | sr_err("Failed to upload FPGA firmware: %s.", libusb_error_name(ret)); | |
56 | return SR_ERR; | |
57 | } | |
58 | buf = g_malloc(FW_BUFSIZE); | |
59 | ||
98fec29e | 60 | if (!(fw = g_fopen(filename, "rb"))) { |
b9d53092 BV |
61 | sr_err("Unable to open %s for reading: %s.", filename, strerror(errno)); |
62 | return SR_ERR; | |
63 | } | |
64 | ||
65 | /* Give the FX2 time to get ready for FPGA firmware upload. */ | |
66 | g_usleep(10 * 1000); | |
67 | ||
68 | sum = 0; | |
69 | result = SR_OK; | |
70 | while (1) { | |
71 | if ((chunksize = fread(buf, 1, FW_BUFSIZE, fw)) == 0) | |
72 | break; | |
73 | ||
74 | if ((ret = libusb_bulk_transfer(usb->devhdl, 2 | LIBUSB_ENDPOINT_OUT, | |
75 | buf, chunksize, &transferred, 1000)) < 0) { | |
76 | sr_err("Unable to configure FPGA firmware: %s.", | |
77 | libusb_error_name(ret)); | |
78 | result = SR_ERR; | |
79 | break; | |
80 | } | |
81 | sum += transferred; | |
82 | sr_spew("Uploaded %d/%d bytes.", sum, st.st_size); | |
83 | ||
84 | if (transferred != chunksize) { | |
85 | sr_err("Short transfer while uploading FPGA firmware."); | |
86 | result = SR_ERR; | |
87 | break; | |
88 | } | |
89 | } | |
90 | fclose(fw); | |
91 | g_free(buf); | |
92 | if (result == SR_OK) | |
93 | sr_dbg("FPGA firmware upload done."); | |
94 | ||
95 | return result; | |
96 | } | |
97 | ||
98 | int dslogic_start_acquisition(const struct sr_dev_inst *sdi) | |
99 | { | |
100 | struct dev_context *devc; | |
101 | struct sr_usb_dev_inst *usb; | |
102 | struct dslogic_mode mode; | |
103 | int ret; | |
104 | ||
105 | devc = sdi->priv; | |
106 | mode.flags = 0; | |
107 | mode.sample_delay_h = mode.sample_delay_l = 0; | |
108 | if (devc->sample_wide) | |
109 | mode.flags |= DS_START_FLAGS_SAMPLE_WIDE; | |
110 | ||
111 | usb = sdi->conn; | |
112 | ret = libusb_control_transfer(usb->devhdl, LIBUSB_REQUEST_TYPE_VENDOR | | |
113 | LIBUSB_ENDPOINT_OUT, DS_CMD_START, 0x0000, 0x0000, | |
114 | (unsigned char *)&mode, sizeof(mode), 3000); | |
115 | if (ret < 0) { | |
116 | sr_err("Failed to send start command: %s.", libusb_error_name(ret)); | |
117 | return SR_ERR; | |
118 | } | |
119 | ||
120 | return SR_OK; | |
121 | } | |
122 | ||
123 | int dslogic_stop_acquisition(const struct sr_dev_inst *sdi) | |
124 | { | |
125 | struct sr_usb_dev_inst *usb; | |
126 | struct dslogic_mode mode; | |
127 | int ret; | |
128 | ||
129 | mode.flags = DS_START_FLAGS_STOP; | |
130 | mode.sample_delay_h = mode.sample_delay_l = 0; | |
131 | ||
132 | usb = sdi->conn; | |
133 | ret = libusb_control_transfer(usb->devhdl, LIBUSB_REQUEST_TYPE_VENDOR | | |
134 | LIBUSB_ENDPOINT_OUT, DS_CMD_START, 0x0000, 0x0000, | |
135 | (unsigned char *)&mode, sizeof(struct dslogic_mode), 3000); | |
136 | if (ret < 0) { | |
137 | sr_err("Failed to send stop command: %s.", libusb_error_name(ret)); | |
138 | return SR_ERR; | |
139 | } | |
140 | ||
141 | return SR_OK; | |
142 | } | |
143 | ||
144 | int dslogic_fpga_configure(const struct sr_dev_inst *sdi) | |
145 | { | |
146 | struct dev_context *devc; | |
147 | struct sr_usb_dev_inst *usb; | |
148 | uint8_t c[3]; | |
149 | struct dslogic_fpga_config cfg; | |
150 | uint16_t v16; | |
151 | uint32_t v32; | |
152 | int transferred, len, ret; | |
153 | ||
154 | sr_dbg("Configuring FPGA."); | |
155 | usb = sdi->conn; | |
156 | devc = sdi->priv; | |
157 | ||
158 | WL32(&cfg.sync, DS_CFG_START); | |
159 | WL16(&cfg.mode_header, DS_CFG_MODE); | |
160 | WL32(&cfg.divider_header, DS_CFG_DIVIDER); | |
161 | WL32(&cfg.count_header, DS_CFG_COUNT); | |
162 | WL32(&cfg.trig_pos_header, DS_CFG_TRIG_POS); | |
163 | WL16(&cfg.trig_glb_header, DS_CFG_TRIG_GLB); | |
164 | WL32(&cfg.trig_adp_header, DS_CFG_TRIG_ADP); | |
165 | WL32(&cfg.trig_sda_header, DS_CFG_TRIG_SDA); | |
166 | WL32(&cfg.trig_mask0_header, DS_CFG_TRIG_MASK0); | |
167 | WL32(&cfg.trig_mask1_header, DS_CFG_TRIG_MASK1); | |
168 | WL32(&cfg.trig_value0_header, DS_CFG_TRIG_VALUE0); | |
169 | WL32(&cfg.trig_value1_header, DS_CFG_TRIG_VALUE1); | |
170 | WL32(&cfg.trig_edge0_header, DS_CFG_TRIG_EDGE0); | |
171 | WL32(&cfg.trig_edge1_header, DS_CFG_TRIG_EDGE1); | |
172 | WL32(&cfg.trig_count0_header, DS_CFG_TRIG_COUNT0); | |
173 | WL32(&cfg.trig_count1_header, DS_CFG_TRIG_COUNT1); | |
174 | WL32(&cfg.trig_logic0_header, DS_CFG_TRIG_LOGIC0); | |
175 | WL32(&cfg.trig_logic1_header, DS_CFG_TRIG_LOGIC1); | |
176 | WL32(&cfg.end_sync, DS_CFG_END); | |
177 | ||
178 | /* Pass in the length of a fixed-size struct. Really. */ | |
179 | len = sizeof(struct dslogic_fpga_config) / 2; | |
180 | c[0] = len & 0xff; | |
181 | c[1] = (len >> 8) & 0xff; | |
182 | c[2] = (len >> 16) & 0xff; | |
183 | ||
184 | ret = libusb_control_transfer(usb->devhdl, LIBUSB_REQUEST_TYPE_VENDOR | | |
185 | LIBUSB_ENDPOINT_OUT, DS_CMD_CONFIG, 0x0000, 0x0000, | |
186 | c, 3, 100); | |
187 | if (ret < 0) { | |
188 | sr_err("Failed to send FPGA configure command: %s.", libusb_error_name(ret)); | |
189 | return SR_ERR; | |
190 | } | |
191 | ||
192 | /* | |
193 | * 15 1 = internal test mode | |
194 | * 14 1 = external test mode | |
195 | * 13 1 = loopback test mode | |
196 | * 8-12 unused | |
197 | * 7 1 = analog mode | |
198 | * 6 1 = samplerate 400MHz | |
199 | * 5 1 = samplerate 200MHz or analog mode | |
200 | * 4 0 = logic, 1 = dso or analog | |
201 | * 2-3 unused | |
202 | * 1 0 = internal clock, 1 = external clock | |
203 | * 0 1 = trigger enabled | |
204 | */ | |
205 | v16 = 0x0000; | |
206 | if (devc->dslogic_mode == DS_OP_INTERNAL_TEST) | |
207 | v16 = 1 << 15; | |
208 | else if (devc->dslogic_mode == DS_OP_EXTERNAL_TEST) | |
209 | v16 = 1 << 14; | |
210 | else if (devc->dslogic_mode == DS_OP_LOOPBACK_TEST) | |
211 | v16 = 1 << 13; | |
212 | if (devc->dslogic_external_clock) | |
213 | v16 |= 1 << 2; | |
214 | WL16(&cfg.mode, v16); | |
215 | ||
216 | v32 = ceil(SR_MHZ(100) * 1.0 / devc->cur_samplerate); | |
217 | WL32(&cfg.divider, v32); | |
218 | WL32(&cfg.count, devc->limit_samples); | |
219 | ||
220 | len = sizeof(struct dslogic_fpga_config); | |
221 | ret = libusb_bulk_transfer(usb->devhdl, 2 | LIBUSB_ENDPOINT_OUT, | |
222 | (unsigned char *)&cfg, len, | |
223 | &transferred, 100); | |
224 | if (ret < 0 || transferred != len) { | |
225 | sr_err("Failed to send FPGA configuration: %s.", libusb_error_name(ret)); | |
226 | return SR_ERR; | |
227 | } | |
228 | ||
229 | return SR_OK; | |
230 | } |