]>
Commit | Line | Data |
---|---|---|
fa0d6afe BV |
1 | /* |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2014 Bert Vermeulen <bert@biot.com> | |
5 | * | |
6 | * This program is free software: you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation, either version 3 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
18 | */ | |
19 | ||
6ec6c43b | 20 | #include <config.h> |
33c40990 | 21 | #include <string.h> |
fa0d6afe BV |
22 | #include "protocol.h" |
23 | ||
33c40990 BV |
24 | /* |
25 | * The default serial communication settings on the device are 9600 | |
26 | * baud, 9 data bits. The 9th bit isn't actually used, and the vendor | |
27 | * software uses Mark parity to absorb the extra bit. | |
28 | * | |
29 | * Since 9 data bits is not a standard available in POSIX, we use two | |
30 | * stop bits to skip over the extra bit instead. | |
31 | */ | |
32 | #define SERIALCOMM "9600/8n2" | |
33 | ||
584560f1 | 34 | static const uint32_t scanopts[] = { |
33c40990 BV |
35 | SR_CONF_CONN, |
36 | SR_CONF_SERIALCOMM, | |
37 | }; | |
38 | ||
1f889afd | 39 | static const uint32_t drvopts[] = { |
33c40990 | 40 | SR_CONF_POWER_SUPPLY, |
d6fa8ace BV |
41 | }; |
42 | ||
1f889afd | 43 | static const uint32_t devopts[] = { |
e91bb0a6 | 44 | SR_CONF_CONTINUOUS, |
7a0b98b5 | 45 | SR_CONF_CHANNEL_CONFIG | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, |
5827f61b | 46 | SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET, |
33c40990 BV |
47 | }; |
48 | ||
584560f1 | 49 | static const uint32_t devopts_cg[] = { |
7a0b98b5 AJ |
50 | SR_CONF_VOLTAGE | SR_CONF_GET, |
51 | SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
52 | SR_CONF_CURRENT | SR_CONF_GET, | |
53 | SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
54 | SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
33c40990 BV |
55 | }; |
56 | ||
57 | static const char *channel_modes[] = { | |
58 | "Independent", | |
59 | "Series", | |
60 | "Parallel", | |
61 | }; | |
62 | ||
329733d9 | 63 | static const struct pps_model models[] = { |
33c40990 BV |
64 | { PPS_3203T_3S, "PPS3203T-3S", |
65 | CHANMODE_INDEPENDENT | CHANMODE_SERIES | CHANMODE_PARALLEL, | |
66 | 3, | |
67 | { | |
68 | /* Channel 1 */ | |
69 | { { 0, 32, 0.01 }, { 0, 3, 0.001 } }, | |
70 | /* Channel 2 */ | |
71 | { { 0, 32, 0.01 }, { 0, 3, 0.001 } }, | |
72 | /* Channel 3 */ | |
73 | { { 0, 6, 0.01 }, { 0, 3, 0.001 } }, | |
74 | }, | |
75 | }, | |
76 | }; | |
77 | ||
4f840ce9 | 78 | static GSList *scan(struct sr_dev_driver *di, GSList *options, int modelid) |
fa0d6afe | 79 | { |
33c40990 | 80 | struct sr_dev_inst *sdi; |
fa0d6afe | 81 | struct drv_context *drvc; |
33c40990 BV |
82 | struct dev_context *devc; |
83 | struct sr_config *src; | |
ba7dd8bb | 84 | struct sr_channel *ch; |
40fd0264 | 85 | struct sr_channel_group *cg; |
33c40990 BV |
86 | struct sr_serial_dev_inst *serial; |
87 | GSList *l, *devices; | |
329733d9 | 88 | const struct pps_model *model; |
33c40990 BV |
89 | uint8_t packet[PACKET_SIZE]; |
90 | unsigned int i; | |
2eb1612d | 91 | int delay_ms, ret; |
33c40990 BV |
92 | const char *conn, *serialcomm; |
93 | char channel[10]; | |
fa0d6afe BV |
94 | |
95 | devices = NULL; | |
41812aca | 96 | drvc = di->context; |
fa0d6afe BV |
97 | drvc->instances = NULL; |
98 | ||
33c40990 BV |
99 | conn = serialcomm = NULL; |
100 | for (l = options; l; l = l->next) { | |
101 | src = l->data; | |
102 | switch (src->key) { | |
103 | case SR_CONF_CONN: | |
104 | conn = g_variant_get_string(src->data, NULL); | |
105 | break; | |
106 | case SR_CONF_SERIALCOMM: | |
107 | serialcomm = g_variant_get_string(src->data, NULL); | |
108 | break; | |
109 | } | |
110 | } | |
111 | if (!conn) | |
112 | return NULL; | |
113 | if (!serialcomm) | |
114 | serialcomm = SERIALCOMM; | |
115 | ||
91219afc | 116 | serial = sr_serial_dev_inst_new(conn, serialcomm); |
33c40990 | 117 | |
5305266a | 118 | if (serial_open(serial, SERIAL_RDWR) != SR_OK) |
33c40990 | 119 | return NULL; |
91219afc | 120 | |
33c40990 BV |
121 | serial_flush(serial); |
122 | ||
945cfd4f | 123 | /* This is how the vendor software scans for hardware. */ |
33c40990 BV |
124 | memset(packet, 0, PACKET_SIZE); |
125 | packet[0] = 0xaa; | |
126 | packet[1] = 0xaa; | |
2eb1612d BV |
127 | delay_ms = serial_timeout(serial, PACKET_SIZE); |
128 | if (serial_write_blocking(serial, packet, PACKET_SIZE, delay_ms) < PACKET_SIZE) { | |
081c214e | 129 | sr_err("Unable to write while probing for hardware."); |
33c40990 BV |
130 | return NULL; |
131 | } | |
132 | /* The device responds with a 24-byte packet when it receives a packet. | |
133 | * At 9600 baud, 300ms is long enough for it to have arrived. */ | |
134 | g_usleep(300 * 1000); | |
135 | memset(packet, 0, PACKET_SIZE); | |
136 | if ((ret = serial_read_nonblocking(serial, packet, PACKET_SIZE)) < 0) { | |
137 | sr_err("Unable to read while probing for hardware: %s", | |
8d522801 | 138 | sr_strerror(ret)); |
33c40990 BV |
139 | return NULL; |
140 | } | |
141 | if (ret != PACKET_SIZE || packet[0] != 0xaa || packet[1] != 0xaa) { | |
142 | /* Doesn't look like an Atten PPS. */ | |
143 | return NULL; | |
144 | } | |
145 | ||
146 | model = NULL; | |
147 | for (i = 0; i < ARRAY_SIZE(models); i++) { | |
148 | if (models[i].modelid == modelid) { | |
149 | model = &models[i]; | |
150 | break; | |
151 | } | |
152 | } | |
153 | if (!model) { | |
154 | sr_err("Unknown modelid %d", modelid); | |
155 | return NULL; | |
156 | } | |
157 | ||
aac29cc1 | 158 | sdi = g_malloc0(sizeof(struct sr_dev_inst)); |
0af636be UH |
159 | sdi->status = SR_ST_INACTIVE; |
160 | sdi->vendor = g_strdup("Atten"); | |
161 | sdi->model = g_strdup(model->name); | |
33c40990 BV |
162 | sdi->driver = di; |
163 | sdi->inst_type = SR_INST_SERIAL; | |
164 | sdi->conn = serial; | |
165 | for (i = 0; i < MAX_CHANNELS; i++) { | |
166 | snprintf(channel, 10, "CH%d", i + 1); | |
5e23fcab | 167 | ch = sr_channel_new(sdi, i, SR_CHANNEL_ANALOG, TRUE, channel); |
40fd0264 UH |
168 | cg = g_malloc(sizeof(struct sr_channel_group)); |
169 | cg->name = g_strdup(channel); | |
ba7dd8bb | 170 | cg->channels = g_slist_append(NULL, ch); |
40fd0264 UH |
171 | cg->priv = NULL; |
172 | sdi->channel_groups = g_slist_append(sdi->channel_groups, cg); | |
33c40990 BV |
173 | } |
174 | ||
175 | devc = g_malloc0(sizeof(struct dev_context)); | |
176 | devc->model = model; | |
177 | devc->config = g_malloc0(sizeof(struct per_channel_config) * model->num_channels); | |
2eb1612d | 178 | devc->delay_ms = delay_ms; |
33c40990 BV |
179 | sdi->priv = devc; |
180 | drvc->instances = g_slist_append(drvc->instances, sdi); | |
181 | devices = g_slist_append(devices, sdi); | |
182 | ||
183 | serial_close(serial); | |
184 | if (!devices) | |
185 | sr_serial_dev_inst_free(serial); | |
fa0d6afe BV |
186 | |
187 | return devices; | |
188 | } | |
189 | ||
4f840ce9 | 190 | static GSList *scan_3203(struct sr_dev_driver *di, GSList *options) |
33c40990 | 191 | { |
4f840ce9 | 192 | return scan(di, options, PPS_3203T_3S); |
33c40990 BV |
193 | } |
194 | ||
584560f1 | 195 | static int config_get(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi, |
53b4680f | 196 | const struct sr_channel_group *cg) |
fa0d6afe | 197 | { |
33c40990 | 198 | struct dev_context *devc; |
ba7dd8bb | 199 | struct sr_channel *ch; |
33c40990 BV |
200 | int channel, ret; |
201 | ||
202 | if (!sdi) | |
203 | return SR_ERR_ARG; | |
fa0d6afe | 204 | |
33c40990 | 205 | devc = sdi->priv; |
fa0d6afe BV |
206 | |
207 | ret = SR_OK; | |
53b4680f | 208 | if (!cg) { |
660e398f | 209 | /* No channel group: global options. */ |
33c40990 | 210 | switch (key) { |
7a0b98b5 | 211 | case SR_CONF_CHANNEL_CONFIG: |
fe997353 | 212 | *data = g_variant_new_string(channel_modes[devc->channel_mode]); |
33c40990 | 213 | break; |
a1eaa9e0 | 214 | case SR_CONF_OVER_CURRENT_PROTECTION_ENABLED: |
33c40990 BV |
215 | *data = g_variant_new_boolean(devc->over_current_protection); |
216 | break; | |
217 | default: | |
218 | return SR_ERR_NA; | |
219 | } | |
220 | } else { | |
660e398f | 221 | /* We only ever have one channel per channel group in this driver. */ |
ba7dd8bb UH |
222 | ch = cg->channels->data; |
223 | channel = ch->index; | |
33c40990 BV |
224 | |
225 | switch (key) { | |
7a0b98b5 | 226 | case SR_CONF_VOLTAGE: |
33c40990 BV |
227 | *data = g_variant_new_double(devc->config[channel].output_voltage_last); |
228 | break; | |
7a0b98b5 | 229 | case SR_CONF_VOLTAGE_TARGET: |
33c40990 BV |
230 | *data = g_variant_new_double(devc->config[channel].output_voltage_max); |
231 | break; | |
7a0b98b5 | 232 | case SR_CONF_CURRENT: |
33c40990 BV |
233 | *data = g_variant_new_double(devc->config[channel].output_current_last); |
234 | break; | |
7a0b98b5 | 235 | case SR_CONF_CURRENT_LIMIT: |
33c40990 BV |
236 | *data = g_variant_new_double(devc->config[channel].output_current_max); |
237 | break; | |
7a0b98b5 | 238 | case SR_CONF_ENABLED: |
33c40990 BV |
239 | *data = g_variant_new_boolean(devc->config[channel].output_enabled); |
240 | break; | |
241 | default: | |
242 | return SR_ERR_NA; | |
243 | } | |
fa0d6afe BV |
244 | } |
245 | ||
246 | return ret; | |
247 | } | |
248 | ||
33c40990 BV |
249 | static int find_str(const char *str, const char **strings, int array_size) |
250 | { | |
251 | int idx, i; | |
252 | ||
253 | idx = -1; | |
254 | for (i = 0; i < array_size; i++) { | |
255 | if (!strcmp(str, strings[i])) { | |
256 | idx = i; | |
257 | break; | |
258 | } | |
259 | } | |
260 | ||
261 | return idx; | |
262 | } | |
263 | ||
584560f1 | 264 | static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sdi, |
53b4680f | 265 | const struct sr_channel_group *cg) |
fa0d6afe | 266 | { |
33c40990 | 267 | struct dev_context *devc; |
ba7dd8bb | 268 | struct sr_channel *ch; |
33c40990 BV |
269 | gdouble dval; |
270 | int channel, ret, ival; | |
271 | const char *sval; | |
272 | gboolean bval; | |
fa0d6afe BV |
273 | |
274 | if (sdi->status != SR_ST_ACTIVE) | |
275 | return SR_ERR_DEV_CLOSED; | |
276 | ||
277 | ret = SR_OK; | |
33c40990 | 278 | devc = sdi->priv; |
53b4680f | 279 | if (!cg) { |
660e398f | 280 | /* No channel group: global options. */ |
33c40990 | 281 | switch (key) { |
7a0b98b5 | 282 | case SR_CONF_CHANNEL_CONFIG: |
33c40990 BV |
283 | sval = g_variant_get_string(data, NULL); |
284 | if ((ival = find_str(sval, channel_modes, | |
285 | ARRAY_SIZE(channel_modes))) == -1) { | |
286 | ret = SR_ERR_ARG; | |
287 | break; | |
288 | } | |
289 | if (devc->model->channel_modes && (1 << ival) == 0) { | |
290 | /* Not supported on this model. */ | |
291 | ret = SR_ERR_ARG; | |
292 | } | |
293 | if (ival == devc->channel_mode_set) | |
294 | /* Nothing to do. */ | |
295 | break; | |
296 | devc->channel_mode_set = ival; | |
ab988ecb | 297 | devc->config_dirty = TRUE; |
33c40990 | 298 | break; |
a1eaa9e0 | 299 | case SR_CONF_OVER_CURRENT_PROTECTION_ENABLED: |
33c40990 BV |
300 | bval = g_variant_get_boolean(data); |
301 | if (bval == devc->over_current_protection_set) | |
302 | /* Nothing to do. */ | |
303 | break; | |
304 | devc->over_current_protection_set = bval; | |
ab988ecb | 305 | devc->config_dirty = TRUE; |
33c40990 BV |
306 | break; |
307 | default: | |
308 | return SR_ERR_NA; | |
309 | } | |
310 | } else { | |
660e398f UH |
311 | /* Channel group specified: per-channel options. */ |
312 | /* We only ever have one channel per channel group in this driver. */ | |
ba7dd8bb UH |
313 | ch = cg->channels->data; |
314 | channel = ch->index; | |
33c40990 BV |
315 | |
316 | switch (key) { | |
7a0b98b5 | 317 | case SR_CONF_VOLTAGE_TARGET: |
33c40990 BV |
318 | dval = g_variant_get_double(data); |
319 | if (dval < 0 || dval > devc->model->channels[channel].voltage[1]) | |
320 | ret = SR_ERR_ARG; | |
321 | devc->config[channel].output_voltage_max = dval; | |
ab988ecb | 322 | devc->config_dirty = TRUE; |
33c40990 | 323 | break; |
7a0b98b5 | 324 | case SR_CONF_CURRENT_LIMIT: |
33c40990 BV |
325 | dval = g_variant_get_double(data); |
326 | if (dval < 0 || dval > devc->model->channels[channel].current[1]) | |
327 | ret = SR_ERR_ARG; | |
328 | devc->config[channel].output_current_max = dval; | |
ab988ecb | 329 | devc->config_dirty = TRUE; |
33c40990 | 330 | break; |
7a0b98b5 | 331 | case SR_CONF_ENABLED: |
33c40990 BV |
332 | bval = g_variant_get_boolean(data); |
333 | if (bval == devc->config[channel].output_enabled_set) | |
334 | /* Nothing to do. */ | |
335 | break; | |
336 | devc->config[channel].output_enabled_set = bval; | |
ab988ecb | 337 | devc->config_dirty = TRUE; |
33c40990 BV |
338 | break; |
339 | default: | |
340 | ret = SR_ERR_NA; | |
341 | } | |
fa0d6afe BV |
342 | } |
343 | ||
344 | return ret; | |
345 | } | |
346 | ||
584560f1 | 347 | static int config_list(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi, |
53b4680f | 348 | const struct sr_channel_group *cg) |
fa0d6afe | 349 | { |
33c40990 | 350 | struct dev_context *devc; |
ba7dd8bb | 351 | struct sr_channel *ch; |
33c40990 BV |
352 | GVariant *gvar; |
353 | GVariantBuilder gvb; | |
354 | int channel, ret, i; | |
355 | ||
d6fa8ace | 356 | /* Always available. */ |
33c40990 | 357 | if (key == SR_CONF_SCAN_OPTIONS) { |
584560f1 BV |
358 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, |
359 | scanopts, ARRAY_SIZE(scanopts), sizeof(uint32_t)); | |
33c40990 BV |
360 | return SR_OK; |
361 | } | |
362 | ||
d6fa8ace BV |
363 | if (key == SR_CONF_DEVICE_OPTIONS && !sdi) { |
364 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, | |
1f889afd | 365 | drvopts, ARRAY_SIZE(drvopts), sizeof(uint32_t)); |
d6fa8ace BV |
366 | return SR_OK; |
367 | } | |
368 | ||
e22aa878 BV |
369 | if (!sdi) |
370 | return SR_ERR_ARG; | |
fa0d6afe | 371 | |
d6fa8ace | 372 | devc = sdi->priv; |
fa0d6afe | 373 | ret = SR_OK; |
53b4680f | 374 | if (!cg) { |
660e398f | 375 | /* No channel group: global options. */ |
33c40990 BV |
376 | switch (key) { |
377 | case SR_CONF_DEVICE_OPTIONS: | |
584560f1 | 378 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, |
1f889afd | 379 | devopts, ARRAY_SIZE(devopts), sizeof(uint32_t)); |
33c40990 | 380 | break; |
7a0b98b5 | 381 | case SR_CONF_CHANNEL_CONFIG: |
33c40990 BV |
382 | if (devc->model->channel_modes == CHANMODE_INDEPENDENT) { |
383 | /* The 1-channel models. */ | |
384 | *data = g_variant_new_strv(channel_modes, 1); | |
385 | } else { | |
386 | /* The other models support all modes. */ | |
387 | *data = g_variant_new_strv(channel_modes, ARRAY_SIZE(channel_modes)); | |
388 | } | |
389 | break; | |
390 | default: | |
391 | return SR_ERR_NA; | |
392 | } | |
393 | } else { | |
660e398f | 394 | /* Channel group specified: per-channel options. */ |
33c40990 BV |
395 | if (!sdi) |
396 | return SR_ERR_ARG; | |
660e398f | 397 | /* We only ever have one channel per channel group in this driver. */ |
ba7dd8bb UH |
398 | ch = cg->channels->data; |
399 | channel = ch->index; | |
33c40990 BV |
400 | |
401 | switch (key) { | |
402 | case SR_CONF_DEVICE_OPTIONS: | |
584560f1 BV |
403 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, |
404 | devopts_cg, ARRAY_SIZE(devopts_cg), sizeof(uint32_t)); | |
33c40990 | 405 | break; |
7a0b98b5 | 406 | case SR_CONF_VOLTAGE_TARGET: |
33c40990 BV |
407 | g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY); |
408 | /* Min, max, step. */ | |
409 | for (i = 0; i < 3; i++) { | |
410 | gvar = g_variant_new_double(devc->model->channels[channel].voltage[i]); | |
411 | g_variant_builder_add_value(&gvb, gvar); | |
412 | } | |
413 | *data = g_variant_builder_end(&gvb); | |
414 | break; | |
7a0b98b5 | 415 | case SR_CONF_CURRENT_LIMIT: |
33c40990 BV |
416 | g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY); |
417 | /* Min, max, step. */ | |
418 | for (i = 0; i < 3; i++) { | |
419 | gvar = g_variant_new_double(devc->model->channels[channel].current[i]); | |
420 | g_variant_builder_add_value(&gvb, gvar); | |
421 | } | |
422 | *data = g_variant_builder_end(&gvb); | |
423 | break; | |
424 | default: | |
425 | return SR_ERR_NA; | |
426 | } | |
fa0d6afe BV |
427 | } |
428 | ||
429 | return ret; | |
430 | } | |
431 | ||
ab988ecb BV |
432 | static int dev_close(struct sr_dev_inst *sdi) |
433 | { | |
434 | struct dev_context *devc; | |
435 | ||
436 | devc = sdi->priv; | |
437 | if (devc->config_dirty) | |
438 | /* Some configuration changes were queued up but didn't | |
439 | * get sent to the device, likely because we were never | |
440 | * in acquisition mode. Send them out now. */ | |
441 | send_config(sdi); | |
442 | ||
443 | return std_serial_dev_close(sdi); | |
444 | } | |
445 | ||
695dc859 | 446 | static int dev_acquisition_start(const struct sr_dev_inst *sdi) |
fa0d6afe | 447 | { |
33c40990 BV |
448 | struct dev_context *devc; |
449 | struct sr_serial_dev_inst *serial; | |
450 | uint8_t packet[PACKET_SIZE]; | |
451 | ||
fa0d6afe BV |
452 | if (sdi->status != SR_ST_ACTIVE) |
453 | return SR_ERR_DEV_CLOSED; | |
454 | ||
33c40990 BV |
455 | devc = sdi->priv; |
456 | memset(devc->packet, 0x44, PACKET_SIZE); | |
457 | devc->packet_size = 0; | |
458 | ||
459 | devc->acquisition_running = TRUE; | |
460 | ||
461 | serial = sdi->conn; | |
102f1239 BV |
462 | serial_source_add(sdi->session, serial, G_IO_IN, 50, |
463 | atten_pps3xxx_receive_data, (void *)sdi); | |
695dc859 | 464 | std_session_send_df_header(sdi, LOG_PREFIX); |
33c40990 | 465 | |
ba7dd8bb | 466 | /* Send a "channel" configuration packet now. */ |
33c40990 BV |
467 | memset(packet, 0, PACKET_SIZE); |
468 | packet[0] = 0xaa; | |
469 | packet[1] = 0xaa; | |
470 | send_packet(sdi, packet); | |
fa0d6afe BV |
471 | |
472 | return SR_OK; | |
473 | } | |
474 | ||
695dc859 | 475 | static int dev_acquisition_stop(struct sr_dev_inst *sdi) |
fa0d6afe | 476 | { |
33c40990 BV |
477 | struct dev_context *devc; |
478 | ||
fa0d6afe BV |
479 | if (sdi->status != SR_ST_ACTIVE) |
480 | return SR_ERR_DEV_CLOSED; | |
481 | ||
33c40990 BV |
482 | devc = sdi->priv; |
483 | devc->acquisition_running = FALSE; | |
fa0d6afe BV |
484 | |
485 | return SR_OK; | |
486 | } | |
487 | ||
dd5c48a6 | 488 | static struct sr_dev_driver atten_pps3203_driver_info = { |
33c40990 BV |
489 | .name = "atten-pps3203", |
490 | .longname = "Atten PPS3203T-3S", | |
fa0d6afe | 491 | .api_version = 1, |
c2fdcc25 | 492 | .init = std_init, |
700d6b64 | 493 | .cleanup = std_cleanup, |
33c40990 | 494 | .scan = scan_3203, |
c01bf34c | 495 | .dev_list = std_dev_list, |
a6630742 | 496 | .dev_clear = NULL, |
fa0d6afe BV |
497 | .config_get = config_get, |
498 | .config_set = config_set, | |
499 | .config_list = config_list, | |
33c40990 | 500 | .dev_open = std_serial_dev_open, |
ab988ecb | 501 | .dev_close = dev_close, |
fa0d6afe BV |
502 | .dev_acquisition_start = dev_acquisition_start, |
503 | .dev_acquisition_stop = dev_acquisition_stop, | |
41812aca | 504 | .context = NULL, |
fa0d6afe | 505 | }; |
dd5c48a6 | 506 | SR_REGISTER_DEV_DRIVER(atten_pps3203_driver_info); |