]>
Commit | Line | Data |
---|---|---|
ac913e5c | 1 | /* |
50985c20 | 2 | * This file is part of the libsigrok project. |
ac913e5c | 3 | * |
71f1302b | 4 | * Copyright (C) 2012-2013 Uwe Hermann <uwe@hermann-uwe.de> |
ac913e5c UH |
5 | * |
6 | * This program is free software; you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation; either version 2 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program; if not, write to the Free Software | |
18 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
19 | */ | |
20 | ||
e83437ae MH |
21 | /** |
22 | * @file | |
23 | * | |
ac913e5c UH |
24 | * Metex 14-bytes ASCII protocol parser. |
25 | * | |
e83437ae | 26 | * @internal |
ac913e5c UH |
27 | * This should work for various multimeters which use this kind of protocol, |
28 | * even though there is some variation in which modes each DMM supports. | |
29 | * | |
30 | * It does _not_ work for all Metex DMMs, some use a quite different protocol. | |
31 | */ | |
32 | ||
33 | #include <string.h> | |
34 | #include <ctype.h> | |
35 | #include <math.h> | |
36 | #include <glib.h> | |
37 | #include "libsigrok.h" | |
38 | #include "libsigrok-internal.h" | |
39 | ||
3544f848 | 40 | #define LOG_PREFIX "metex14" |
ac913e5c | 41 | |
e83437ae MH |
42 | /** Parse value from buf, byte 2-8. */ |
43 | static int parse_value(const uint8_t *buf, struct metex14_info *info, | |
44 | float *result) | |
ac913e5c | 45 | { |
1a807c13 UH |
46 | int i, is_ol, cnt; |
47 | char valstr[7 + 1]; | |
48 | ||
49 | /* Strip all spaces from bytes 2-8. */ | |
50 | memset(&valstr, 0, 7 + 1); | |
51 | for (i = 0, cnt = 0; i < 7; i++) { | |
52 | if (buf[2 + i] != ' ') | |
53 | valstr[cnt++] = buf[2 + i]; | |
ac913e5c UH |
54 | } |
55 | ||
56 | /* Bytes 5-7: Over limit (various forms) */ | |
57 | is_ol = 0; | |
ee6cb5a4 UH |
58 | is_ol += (!strcasecmp((const char *)&valstr, ".OL")) ? 1 : 0; |
59 | is_ol += (!strcasecmp((const char *)&valstr, "O.L")) ? 1 : 0; | |
60 | is_ol += (!strcasecmp((const char *)&valstr, "OL.")) ? 1 : 0; | |
61 | is_ol += (!strcasecmp((const char *)&valstr, "OL")) ? 1 : 0; | |
3a8cad91 UH |
62 | is_ol += (!strcasecmp((const char *)&valstr, "-.OL")) ? 1 : 0; |
63 | is_ol += (!strcasecmp((const char *)&valstr, "-O.L")) ? 1 : 0; | |
64 | is_ol += (!strcasecmp((const char *)&valstr, "-OL.")) ? 1 : 0; | |
65 | is_ol += (!strcasecmp((const char *)&valstr, "-OL")) ? 1 : 0; | |
ac913e5c UH |
66 | if (is_ol != 0) { |
67 | sr_spew("Over limit."); | |
68 | *result = INFINITY; | |
69 | return SR_OK; | |
70 | } | |
71 | ||
e83437ae MH |
72 | /* Logic functions */ |
73 | if (!strcmp((const char *)&valstr, "READY") || | |
74 | !strcmp((const char *)&valstr, "FLOAT")) { | |
75 | *result = INFINITY; | |
76 | info->is_logic = TRUE; | |
77 | } else if (!strcmp((const char *)&valstr, "Hi")) { | |
78 | *result = 1.0; | |
79 | info->is_logic = TRUE; | |
80 | } else if (!strcmp((const char *)&valstr, "Lo")) { | |
81 | *result = 0.0; | |
82 | info->is_logic = TRUE; | |
83 | } | |
84 | if (info->is_logic) | |
85 | return SR_OK; | |
86 | ||
1a807c13 UH |
87 | /* Bytes 2-8: Sign, value (up to 5 digits) and decimal point */ |
88 | sscanf((const char *)&valstr, "%f", result); | |
ac913e5c | 89 | |
1a807c13 | 90 | sr_spew("The display value is %f.", *result); |
ac913e5c UH |
91 | |
92 | return SR_OK; | |
93 | } | |
94 | ||
95 | static void parse_flags(const char *buf, struct metex14_info *info) | |
96 | { | |
71f1302b UH |
97 | int i, cnt; |
98 | char unit[4 + 1]; | |
99 | const char *u; | |
100 | ||
e83437ae MH |
101 | /* Bytes 0-1: Measurement mode AC, DC */ |
102 | info->is_ac = !strncmp(buf, "AC", 2); | |
103 | info->is_dc = !strncmp(buf, "DC", 2); | |
ac913e5c | 104 | |
1a807c13 | 105 | /* Bytes 2-8: See parse_value(). */ |
ac913e5c | 106 | |
1a807c13 | 107 | /* Strip all spaces from bytes 9-12. */ |
71f1302b UH |
108 | memset(&unit, 0, 4 + 1); |
109 | for (i = 0, cnt = 0; i < 4; i++) { | |
110 | if (buf[9 + i] != ' ') | |
111 | unit[cnt++] = buf[9 + i]; | |
112 | } | |
1a807c13 UH |
113 | |
114 | /* Bytes 9-12: Unit */ | |
71f1302b | 115 | u = (const char *)&unit; |
ee6cb5a4 | 116 | if (!strcasecmp(u, "A")) |
ac913e5c | 117 | info->is_ampere = TRUE; |
ee6cb5a4 | 118 | else if (!strcasecmp(u, "mA")) |
ac913e5c | 119 | info->is_milli = info->is_ampere = TRUE; |
ee6cb5a4 | 120 | else if (!strcasecmp(u, "uA")) |
2477fb95 | 121 | info->is_micro = info->is_ampere = TRUE; |
ee6cb5a4 | 122 | else if (!strcasecmp(u, "V")) |
ac913e5c | 123 | info->is_volt = TRUE; |
ee6cb5a4 | 124 | else if (!strcasecmp(u, "mV")) |
ac913e5c | 125 | info->is_milli = info->is_volt = TRUE; |
ee6cb5a4 | 126 | else if (!strcasecmp(u, "Ohm")) |
ac913e5c | 127 | info->is_ohm = TRUE; |
ee6cb5a4 | 128 | else if (!strcasecmp(u, "KOhm")) |
ac913e5c | 129 | info->is_kilo = info->is_ohm = TRUE; |
ee6cb5a4 | 130 | else if (!strcasecmp(u, "MOhm")) |
ac913e5c | 131 | info->is_mega = info->is_ohm = TRUE; |
c02dc3e2 UH |
132 | else if (!strcasecmp(u, "pF")) |
133 | info->is_pico = info->is_farad = TRUE; | |
ee6cb5a4 | 134 | else if (!strcasecmp(u, "nF")) |
ac913e5c | 135 | info->is_nano = info->is_farad = TRUE; |
ee6cb5a4 | 136 | else if (!strcasecmp(u, "uF")) |
ac913e5c | 137 | info->is_micro = info->is_farad = TRUE; |
ee6cb5a4 | 138 | else if (!strcasecmp(u, "KHz")) |
ac913e5c | 139 | info->is_kilo = info->is_hertz = TRUE; |
ee6cb5a4 | 140 | else if (!strcasecmp(u, "C")) |
ac913e5c | 141 | info->is_celsius = TRUE; |
ee6cb5a4 | 142 | else if (!strcasecmp(u, "DB")) |
9871215c | 143 | info->is_decibel = TRUE; |
ee6cb5a4 | 144 | else if (!strcasecmp(u, "")) |
9871215c | 145 | info->is_unitless = TRUE; |
ac913e5c | 146 | |
e83437ae MH |
147 | /* Bytes 0-1: Measurement mode, except AC/DC */ |
148 | info->is_resistance = !strncmp(buf, "OH", 2) || | |
149 | (!strncmp(buf, " ", 2) && info->is_ohm); | |
150 | info->is_capacity = !strncmp(buf, "CA", 2) || | |
151 | (!strncmp(buf, " ", 2) && info->is_farad); | |
152 | info->is_temperature = !strncmp(buf, "TE", 2); | |
153 | info->is_diode = !strncmp(buf, "DI", 2) || | |
154 | (!strncmp(buf, " ", 2) && info->is_volt && info->is_milli); | |
155 | info->is_frequency = !strncmp(buf, "FR", 2) || | |
156 | (!strncmp(buf, " ", 2) && info->is_hertz); | |
157 | info->is_gain = !strncmp(buf, "DB", 2); | |
158 | info->is_hfe = !strncmp(buf, "HF", 2) || | |
159 | (!strncmp(buf, " ", 2) && !info->is_volt && !info->is_ohm && | |
160 | !info->is_logic && !info->is_farad && !info->is_hertz); | |
161 | /* | |
162 | * Note: | |
163 | * - Protocol doesn't distinguish "resistance" from "beep" mode. | |
164 | * - "DB" shows the logarithmic ratio of input voltage to a | |
165 | * pre-stored (user-changeable) value in the DMM. | |
166 | */ | |
167 | ||
ac913e5c UH |
168 | /* Byte 13: Always '\r' (carriage return, 0x0d, 13) */ |
169 | } | |
170 | ||
171 | static void handle_flags(struct sr_datafeed_analog *analog, float *floatval, | |
172 | const struct metex14_info *info) | |
173 | { | |
174 | /* Factors */ | |
c02dc3e2 UH |
175 | if (info->is_pico) |
176 | *floatval /= 1000000000000ULL; | |
ac913e5c UH |
177 | if (info->is_nano) |
178 | *floatval /= 1000000000; | |
179 | if (info->is_micro) | |
180 | *floatval /= 1000000; | |
181 | if (info->is_milli) | |
182 | *floatval /= 1000; | |
183 | if (info->is_kilo) | |
184 | *floatval *= 1000; | |
185 | if (info->is_mega) | |
186 | *floatval *= 1000000; | |
187 | ||
188 | /* Measurement modes */ | |
189 | if (info->is_volt) { | |
190 | analog->mq = SR_MQ_VOLTAGE; | |
191 | analog->unit = SR_UNIT_VOLT; | |
192 | } | |
193 | if (info->is_ampere) { | |
194 | analog->mq = SR_MQ_CURRENT; | |
195 | analog->unit = SR_UNIT_AMPERE; | |
196 | } | |
197 | if (info->is_ohm) { | |
198 | analog->mq = SR_MQ_RESISTANCE; | |
199 | analog->unit = SR_UNIT_OHM; | |
200 | } | |
201 | if (info->is_hertz) { | |
202 | analog->mq = SR_MQ_FREQUENCY; | |
203 | analog->unit = SR_UNIT_HERTZ; | |
204 | } | |
205 | if (info->is_farad) { | |
206 | analog->mq = SR_MQ_CAPACITANCE; | |
207 | analog->unit = SR_UNIT_FARAD; | |
208 | } | |
209 | if (info->is_celsius) { | |
210 | analog->mq = SR_MQ_TEMPERATURE; | |
211 | analog->unit = SR_UNIT_CELSIUS; | |
212 | } | |
213 | if (info->is_diode) { | |
214 | analog->mq = SR_MQ_VOLTAGE; | |
215 | analog->unit = SR_UNIT_VOLT; | |
216 | } | |
9871215c UH |
217 | if (info->is_gain) { |
218 | analog->mq = SR_MQ_GAIN; | |
219 | analog->unit = SR_UNIT_DECIBEL_VOLT; | |
220 | } | |
221 | if (info->is_hfe) { | |
222 | analog->mq = SR_MQ_GAIN; | |
223 | analog->unit = SR_UNIT_UNITLESS; | |
224 | } | |
e83437ae MH |
225 | if (info->is_logic) { |
226 | analog->mq = SR_MQ_GAIN; | |
227 | analog->unit = SR_UNIT_UNITLESS; | |
228 | } | |
ac913e5c UH |
229 | |
230 | /* Measurement related flags */ | |
231 | if (info->is_ac) | |
232 | analog->mqflags |= SR_MQFLAG_AC; | |
233 | if (info->is_dc) | |
234 | analog->mqflags |= SR_MQFLAG_DC; | |
a6ed50f4 UH |
235 | if (info->is_diode) |
236 | analog->mqflags |= SR_MQFLAG_DIODE; | |
ac913e5c UH |
237 | } |
238 | ||
239 | static gboolean flags_valid(const struct metex14_info *info) | |
240 | { | |
241 | int count; | |
242 | ||
243 | /* Does the packet have more than one multiplier? */ | |
244 | count = 0; | |
c02dc3e2 | 245 | count += (info->is_pico) ? 1 : 0; |
ac913e5c UH |
246 | count += (info->is_nano) ? 1 : 0; |
247 | count += (info->is_micro) ? 1 : 0; | |
248 | count += (info->is_milli) ? 1 : 0; | |
249 | count += (info->is_kilo) ? 1 : 0; | |
250 | count += (info->is_mega) ? 1 : 0; | |
251 | if (count > 1) { | |
ec5186f9 | 252 | sr_dbg("More than one multiplier detected in packet."); |
ac913e5c UH |
253 | return FALSE; |
254 | } | |
255 | ||
256 | /* Does the packet "measure" more than one type of value? */ | |
257 | count = 0; | |
258 | count += (info->is_ac) ? 1 : 0; | |
259 | count += (info->is_dc) ? 1 : 0; | |
260 | count += (info->is_resistance) ? 1 : 0; | |
261 | count += (info->is_capacity) ? 1 : 0; | |
262 | count += (info->is_temperature) ? 1 : 0; | |
263 | count += (info->is_diode) ? 1 : 0; | |
264 | count += (info->is_frequency) ? 1 : 0; | |
265 | if (count > 1) { | |
ec5186f9 | 266 | sr_dbg("More than one measurement type detected in packet."); |
ac913e5c UH |
267 | return FALSE; |
268 | } | |
269 | ||
270 | /* Both AC and DC set? */ | |
271 | if (info->is_ac && info->is_dc) { | |
ec5186f9 | 272 | sr_dbg("Both AC and DC flags detected in packet."); |
ac913e5c UH |
273 | return FALSE; |
274 | } | |
275 | ||
276 | return TRUE; | |
277 | } | |
278 | ||
c4f2dfd0 | 279 | #ifdef HAVE_LIBSERIALPORT |
e90cf076 UH |
280 | SR_PRIV int sr_metex14_packet_request(struct sr_serial_dev_inst *serial) |
281 | { | |
282 | const uint8_t wbuf = 'D'; | |
283 | ||
284 | sr_spew("Requesting DMM packet."); | |
285 | ||
4277ac34 | 286 | return (serial_write_nonblocking(serial, &wbuf, 1) == 1) ? SR_OK : SR_ERR; |
e90cf076 | 287 | } |
c4f2dfd0 | 288 | #endif |
e90cf076 | 289 | |
ac913e5c UH |
290 | SR_PRIV gboolean sr_metex14_packet_valid(const uint8_t *buf) |
291 | { | |
292 | struct metex14_info info; | |
293 | ||
294 | memset(&info, 0x00, sizeof(struct metex14_info)); | |
295 | parse_flags((const char *)buf, &info); | |
296 | ||
297 | if (!flags_valid(&info)) | |
298 | return FALSE; | |
299 | ||
300 | if (buf[13] != '\r') | |
301 | return FALSE; | |
302 | ||
303 | return TRUE; | |
304 | } | |
305 | ||
306 | /** | |
307 | * Parse a protocol packet. | |
308 | * | |
1fbab466 | 309 | * @param buf Buffer containing the protocol packet. Must not be NULL. |
ac913e5c | 310 | * @param floatval Pointer to a float variable. That variable will be modified |
1fbab466 | 311 | * in-place depending on the protocol packet. Must not be NULL. |
ac913e5c UH |
312 | * @param analog Pointer to a struct sr_datafeed_analog. The struct will be |
313 | * filled with data according to the protocol packet. | |
1fbab466 UH |
314 | * Must not be NULL. |
315 | * @param info Pointer to a struct metex14_info. The struct will be filled | |
316 | * with data according to the protocol packet. Must not be NULL. | |
ac913e5c UH |
317 | * |
318 | * @return SR_OK upon success, SR_ERR upon failure. Upon errors, the | |
319 | * 'analog' variable contents are undefined and should not be used. | |
320 | */ | |
321 | SR_PRIV int sr_metex14_parse(const uint8_t *buf, float *floatval, | |
1fbab466 | 322 | struct sr_datafeed_analog *analog, void *info) |
ac913e5c UH |
323 | { |
324 | int ret; | |
1fbab466 UH |
325 | struct metex14_info *info_local; |
326 | ||
327 | info_local = (struct metex14_info *)info; | |
ac913e5c | 328 | |
e82d7dbc AG |
329 | /* Don't print byte 13. That one contains the carriage return. */ |
330 | sr_dbg("DMM packet: \"%.13s\"", buf); | |
331 | ||
e83437ae MH |
332 | memset(info_local, 0x00, sizeof(struct metex14_info)); |
333 | ||
334 | if ((ret = parse_value(buf, info_local, floatval)) != SR_OK) { | |
ec5186f9 | 335 | sr_dbg("Error parsing value: %d.", ret); |
ac913e5c UH |
336 | return ret; |
337 | } | |
338 | ||
1fbab466 UH |
339 | parse_flags((const char *)buf, info_local); |
340 | handle_flags(analog, floatval, info_local); | |
ac913e5c UH |
341 | |
342 | return SR_OK; | |
343 | } |