[sigrok-dumps.git] / rfid / em4100 / rfid_copier / README

-------------------------------------------------------------------------------
RFID EM4100
-------------------------------------------------------------------------------

This is a signal taken from the read pin an RFID copier. A tag was placed
in front of the coil and the logic analyzer started sampling from within
PulseView.

The tag hex value is 0x0200F5ED8D.


Logic analyzer setup
--------------------

The logic analyzer used was a Saleae Logic16 clone (at 2MHz):

  Probe       RFID reader
  -----------------------
  1           RFID reader coil


Data
----

There is noise from the coil at the beginning and end. In the middle the tag
repeats its message.
Commit	Line	Data
be83fe11 BL	1	-------------------------------------------------------------------------------
	2	RFID EM4100
	3	-------------------------------------------------------------------------------
	4
	5	This is a signal taken from the read pin an RFID copier. A tag was placed
	6	in front of the coil and the logic analyzer started sampling from within
	7	PulseView.
	8
	9	The tag hex value is 0x0200F5ED8D.
	10
	11
	12	Logic analyzer setup
	13	--------------------
	14
	15	The logic analyzer used was a Saleae Logic16 clone (at 2MHz):
	16
	17	Probe RFID reader
	18	-----------------------
	19	1 RFID reader coil
	20
	21
	22	Data
	23	----
	24
	25	There is noise from the coil at the beginning and end. In the middle the tag
	26	repeats its message.