]>
Commit | Line | Data |
---|---|---|
f44d2db2 | 1 | ## |
50bd5d25 | 2 | ## This file is part of the libsigrokdecode project. |
f44d2db2 | 3 | ## |
0bb7bcf3 | 4 | ## Copyright (C) 2011-2014 Uwe Hermann <uwe@hermann-uwe.de> |
f44d2db2 UH |
5 | ## |
6 | ## This program is free software; you can redistribute it and/or modify | |
7 | ## it under the terms of the GNU General Public License as published by | |
8 | ## the Free Software Foundation; either version 2 of the License, or | |
9 | ## (at your option) any later version. | |
10 | ## | |
11 | ## This program is distributed in the hope that it will be useful, | |
12 | ## but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | ## GNU General Public License for more details. | |
15 | ## | |
16 | ## You should have received a copy of the GNU General Public License | |
4539e9ca | 17 | ## along with this program; if not, see <http://www.gnu.org/licenses/>. |
f44d2db2 UH |
18 | ## |
19 | ||
677d597b | 20 | import sigrokdecode as srd |
5166b031 | 21 | from common.srdhelper import bitpack |
b5712ccb | 22 | from math import floor, ceil |
f44d2db2 | 23 | |
4cace3b8 | 24 | ''' |
c515eed7 | 25 | OUTPUT_PYTHON format: |
4cace3b8 | 26 | |
bf69977d UH |
27 | Packet: |
28 | [<ptype>, <rxtx>, <pdata>] | |
4cace3b8 | 29 | |
bf69977d | 30 | This is the list of <ptype>s and their respective <pdata> values: |
4cace3b8 | 31 | - 'STARTBIT': The data is the (integer) value of the start bit (0/1). |
0c7d5a56 UH |
32 | - 'DATA': This is always a tuple containing two items: |
33 | - 1st item: the (integer) value of the UART data. Valid values | |
6ffd71c1 | 34 | range from 0 to 511 (as the data can be up to 9 bits in size). |
0c7d5a56 | 35 | - 2nd item: the list of individual data bits and their ss/es numbers. |
4cace3b8 UH |
36 | - 'PARITYBIT': The data is the (integer) value of the parity bit (0/1). |
37 | - 'STOPBIT': The data is the (integer) value of the stop bit (0 or 1). | |
38 | - 'INVALID STARTBIT': The data is the (integer) value of the start bit (0/1). | |
39 | - 'INVALID STOPBIT': The data is the (integer) value of the stop bit (0/1). | |
40 | - 'PARITY ERROR': The data is a tuple with two entries. The first one is | |
41 | the expected parity value, the second is the actual parity value. | |
42 | - TODO: Frame error? | |
b025eab7 | 43 | - 'BREAK': The data is always 0. |
4cace3b8 UH |
44 | |
45 | The <rxtx> field is 0 for RX packets, 1 for TX packets. | |
46 | ''' | |
47 | ||
97cca21f UH |
48 | # Used for differentiating between the two data directions. |
49 | RX = 0 | |
50 | TX = 1 | |
51 | ||
f44d2db2 UH |
52 | # Given a parity type to check (odd, even, zero, one), the value of the |
53 | # parity bit, the value of the data, and the length of the data (5-9 bits, | |
54 | # usually 8 bits) return True if the parity is correct, False otherwise. | |
a7fc4c34 | 55 | # 'none' is _not_ allowed as value for 'parity_type'. |
f44d2db2 UH |
56 | def parity_ok(parity_type, parity_bit, data, num_data_bits): |
57 | ||
58 | # Handle easy cases first (parity bit is always 1 or 0). | |
a7fc4c34 | 59 | if parity_type == 'zero': |
f44d2db2 | 60 | return parity_bit == 0 |
a7fc4c34 | 61 | elif parity_type == 'one': |
f44d2db2 UH |
62 | return parity_bit == 1 |
63 | ||
64 | # Count number of 1 (high) bits in the data (and the parity bit itself!). | |
ac941bf9 | 65 | ones = bin(data).count('1') + parity_bit |
f44d2db2 UH |
66 | |
67 | # Check for odd/even parity. | |
a7fc4c34 | 68 | if parity_type == 'odd': |
ac941bf9 | 69 | return (ones % 2) == 1 |
a7fc4c34 | 70 | elif parity_type == 'even': |
ac941bf9 | 71 | return (ones % 2) == 0 |
f44d2db2 | 72 | |
21cda951 UH |
73 | class SamplerateError(Exception): |
74 | pass | |
75 | ||
f04964c6 UH |
76 | class ChannelError(Exception): |
77 | pass | |
78 | ||
677d597b | 79 | class Decoder(srd.Decoder): |
dcd3d626 | 80 | api_version = 3 |
f44d2db2 UH |
81 | id = 'uart' |
82 | name = 'UART' | |
3d3da57d | 83 | longname = 'Universal Asynchronous Receiver/Transmitter' |
a465436e | 84 | desc = 'Asynchronous, serial bus.' |
f44d2db2 UH |
85 | license = 'gplv2+' |
86 | inputs = ['logic'] | |
87 | outputs = ['uart'] | |
6a15597a | 88 | optional_channels = ( |
f44d2db2 UH |
89 | # Allow specifying only one of the signals, e.g. if only one data |
90 | # direction exists (or is relevant). | |
29ed0f4c UH |
91 | {'id': 'rx', 'name': 'RX', 'desc': 'UART receive line'}, |
92 | {'id': 'tx', 'name': 'TX', 'desc': 'UART transmit line'}, | |
da9bcbd9 | 93 | ) |
84c1c0b5 BV |
94 | options = ( |
95 | {'id': 'baudrate', 'desc': 'Baud rate', 'default': 115200}, | |
96 | {'id': 'num_data_bits', 'desc': 'Data bits', 'default': 8, | |
97 | 'values': (5, 6, 7, 8, 9)}, | |
98 | {'id': 'parity_type', 'desc': 'Parity type', 'default': 'none', | |
99 | 'values': ('none', 'odd', 'even', 'zero', 'one')}, | |
100 | {'id': 'parity_check', 'desc': 'Check parity?', 'default': 'yes', | |
101 | 'values': ('yes', 'no')}, | |
102 | {'id': 'num_stop_bits', 'desc': 'Stop bits', 'default': 1.0, | |
103 | 'values': (0.0, 0.5, 1.0, 1.5)}, | |
104 | {'id': 'bit_order', 'desc': 'Bit order', 'default': 'lsb-first', | |
105 | 'values': ('lsb-first', 'msb-first')}, | |
ea36c198 | 106 | {'id': 'format', 'desc': 'Data format', 'default': 'hex', |
84c1c0b5 | 107 | 'values': ('ascii', 'dec', 'hex', 'oct', 'bin')}, |
4eafeeef DB |
108 | {'id': 'invert_rx', 'desc': 'Invert RX?', 'default': 'no', |
109 | 'values': ('yes', 'no')}, | |
110 | {'id': 'invert_tx', 'desc': 'Invert TX?', 'default': 'no', | |
111 | 'values': ('yes', 'no')}, | |
84c1c0b5 | 112 | ) |
da9bcbd9 BV |
113 | annotations = ( |
114 | ('rx-data', 'RX data'), | |
115 | ('tx-data', 'TX data'), | |
116 | ('rx-start', 'RX start bits'), | |
117 | ('tx-start', 'TX start bits'), | |
118 | ('rx-parity-ok', 'RX parity OK bits'), | |
119 | ('tx-parity-ok', 'TX parity OK bits'), | |
120 | ('rx-parity-err', 'RX parity error bits'), | |
121 | ('tx-parity-err', 'TX parity error bits'), | |
122 | ('rx-stop', 'RX stop bits'), | |
123 | ('tx-stop', 'TX stop bits'), | |
124 | ('rx-warnings', 'RX warnings'), | |
125 | ('tx-warnings', 'TX warnings'), | |
126 | ('rx-data-bits', 'RX data bits'), | |
127 | ('tx-data-bits', 'TX data bits'), | |
03a986ea GS |
128 | ('rx-break', 'RX break'), |
129 | ('tx-break', 'TX break'), | |
da9bcbd9 | 130 | ) |
2ce20a91 | 131 | annotation_rows = ( |
4e3b276a | 132 | ('rx-data', 'RX', (0, 2, 4, 6, 8)), |
4aedd5b8 | 133 | ('rx-data-bits', 'RX bits', (12,)), |
4e3b276a | 134 | ('rx-warnings', 'RX warnings', (10,)), |
03a986ea | 135 | ('rx-break', 'RX break', (14,)), |
4aedd5b8 UH |
136 | ('tx-data', 'TX', (1, 3, 5, 7, 9)), |
137 | ('tx-data-bits', 'TX bits', (13,)), | |
4e3b276a | 138 | ('tx-warnings', 'TX warnings', (11,)), |
03a986ea | 139 | ('tx-break', 'TX break', (15,)), |
2ce20a91 | 140 | ) |
0bb7bcf3 UH |
141 | binary = ( |
142 | ('rx', 'RX dump'), | |
143 | ('tx', 'TX dump'), | |
144 | ('rxtx', 'RX/TX dump'), | |
145 | ) | |
96a044da | 146 | idle_state = ['WAIT FOR START BIT', 'WAIT FOR START BIT'] |
f44d2db2 | 147 | |
97cca21f | 148 | def putx(self, rxtx, data): |
b5712ccb PA |
149 | s, halfbit = self.startsample[rxtx], self.bit_width / 2.0 |
150 | self.put(s - floor(halfbit), self.samplenum + ceil(halfbit), self.out_ann, data) | |
15ac6604 | 151 | |
4aedd5b8 | 152 | def putpx(self, rxtx, data): |
b5712ccb PA |
153 | s, halfbit = self.startsample[rxtx], self.bit_width / 2.0 |
154 | self.put(s - floor(halfbit), self.samplenum + ceil(halfbit), self.out_python, data) | |
4aedd5b8 | 155 | |
15ac6604 | 156 | def putg(self, data): |
b5712ccb PA |
157 | s, halfbit = self.samplenum, self.bit_width / 2.0 |
158 | self.put(s - floor(halfbit), s + ceil(halfbit), self.out_ann, data) | |
15ac6604 UH |
159 | |
160 | def putp(self, data): | |
b5712ccb PA |
161 | s, halfbit = self.samplenum, self.bit_width / 2.0 |
162 | self.put(s - floor(halfbit), s + ceil(halfbit), self.out_python, data) | |
97cca21f | 163 | |
03a986ea GS |
164 | def putgse(self, ss, es, data): |
165 | self.put(ss, es, self.out_ann, data) | |
166 | ||
167 | def putpse(self, ss, es, data): | |
168 | self.put(ss, es, self.out_python, data) | |
169 | ||
0bb7bcf3 | 170 | def putbin(self, rxtx, data): |
b5712ccb | 171 | s, halfbit = self.startsample[rxtx], self.bit_width / 2.0 |
2f370328 | 172 | self.put(s - floor(halfbit), self.samplenum + ceil(halfbit), self.out_binary, data) |
0bb7bcf3 | 173 | |
92b7b49f | 174 | def __init__(self): |
10aeb8ea GS |
175 | self.reset() |
176 | ||
177 | def reset(self): | |
f372d597 | 178 | self.samplerate = None |
f44d2db2 | 179 | self.samplenum = 0 |
97cca21f UH |
180 | self.frame_start = [-1, -1] |
181 | self.startbit = [-1, -1] | |
182 | self.cur_data_bit = [0, 0] | |
e9a3c933 | 183 | self.datavalue = [0, 0] |
1ccef461 | 184 | self.paritybit = [-1, -1] |
97cca21f UH |
185 | self.stopbit1 = [-1, -1] |
186 | self.startsample = [-1, -1] | |
2b716038 | 187 | self.state = ['WAIT FOR START BIT', 'WAIT FOR START BIT'] |
4aedd5b8 | 188 | self.databits = [[], []] |
03a986ea | 189 | self.break_start = [None, None] |
f44d2db2 | 190 | |
f372d597 | 191 | def start(self): |
c515eed7 | 192 | self.out_python = self.register(srd.OUTPUT_PYTHON) |
2f370328 | 193 | self.out_binary = self.register(srd.OUTPUT_BINARY) |
be465111 | 194 | self.out_ann = self.register(srd.OUTPUT_ANN) |
98b89139 | 195 | self.bw = (self.options['num_data_bits'] + 7) // 8 |
f44d2db2 | 196 | |
f372d597 BV |
197 | def metadata(self, key, value): |
198 | if key == srd.SRD_CONF_SAMPLERATE: | |
35b380b1 | 199 | self.samplerate = value |
f372d597 BV |
200 | # The width of one UART bit in number of samples. |
201 | self.bit_width = float(self.samplerate) / float(self.options['baudrate']) | |
f44d2db2 | 202 | |
dcd3d626 | 203 | def get_sample_point(self, rxtx, bitnum): |
0b83932c | 204 | # Determine absolute sample number of a bit slot's sample point. |
f44d2db2 UH |
205 | # bitpos is the samplenumber which is in the middle of the |
206 | # specified UART bit (0 = start bit, 1..x = data, x+1 = parity bit | |
207 | # (if used) or the first stop bit, and so on). | |
b5712ccb PA |
208 | # The samples within bit are 0, 1, ..., (bit_width - 1), therefore |
209 | # index of the middle sample within bit window is (bit_width - 1) / 2. | |
210 | bitpos = self.frame_start[rxtx] + (self.bit_width - 1) / 2.0 | |
f44d2db2 | 211 | bitpos += bitnum * self.bit_width |
dcd3d626 GS |
212 | return bitpos |
213 | ||
dcd3d626 | 214 | def wait_for_start_bit(self, rxtx, signal): |
f44d2db2 | 215 | # Save the sample number where the start bit begins. |
97cca21f | 216 | self.frame_start[rxtx] = self.samplenum |
f44d2db2 | 217 | |
2b716038 | 218 | self.state[rxtx] = 'GET START BIT' |
f44d2db2 | 219 | |
97cca21f | 220 | def get_start_bit(self, rxtx, signal): |
97cca21f | 221 | self.startbit[rxtx] = signal |
f44d2db2 | 222 | |
711d0602 GS |
223 | # The startbit must be 0. If not, we report an error and wait |
224 | # for the next start bit (assuming this one was spurious). | |
97cca21f | 225 | if self.startbit[rxtx] != 0: |
15ac6604 | 226 | self.putp(['INVALID STARTBIT', rxtx, self.startbit[rxtx]]) |
76a4498f | 227 | self.putg([rxtx + 10, ['Frame error', 'Frame err', 'FE']]) |
711d0602 GS |
228 | self.state[rxtx] = 'WAIT FOR START BIT' |
229 | return | |
f44d2db2 | 230 | |
97cca21f | 231 | self.cur_data_bit[rxtx] = 0 |
e9a3c933 | 232 | self.datavalue[rxtx] = 0 |
97cca21f | 233 | self.startsample[rxtx] = -1 |
f44d2db2 | 234 | |
15ac6604 | 235 | self.putp(['STARTBIT', rxtx, self.startbit[rxtx]]) |
2ce20a91 | 236 | self.putg([rxtx + 2, ['Start bit', 'Start', 'S']]) |
f44d2db2 | 237 | |
4bb42a91 GS |
238 | self.state[rxtx] = 'GET DATA BITS' |
239 | ||
97cca21f | 240 | def get_data_bits(self, rxtx, signal): |
15ac6604 | 241 | # Save the sample number of the middle of the first data bit. |
97cca21f UH |
242 | if self.startsample[rxtx] == -1: |
243 | self.startsample[rxtx] = self.samplenum | |
f44d2db2 | 244 | |
4aedd5b8 UH |
245 | self.putg([rxtx + 12, ['%d' % signal]]) |
246 | ||
247 | # Store individual data bits and their start/end samplenumbers. | |
248 | s, halfbit = self.samplenum, int(self.bit_width / 2) | |
249 | self.databits[rxtx].append([signal, s - halfbit, s + halfbit]) | |
250 | ||
f44d2db2 | 251 | # Return here, unless we already received all data bits. |
5e3c79fd GS |
252 | self.cur_data_bit[rxtx] += 1 |
253 | if self.cur_data_bit[rxtx] < self.options['num_data_bits']: | |
1bb57ab8 | 254 | return |
f44d2db2 | 255 | |
5166b031 GS |
256 | # Convert accumulated data bits to a data value. |
257 | bits = [b[0] for b in self.databits[rxtx]] | |
258 | if self.options['bit_order'] == 'msb-first': | |
259 | bits.reverse() | |
260 | self.datavalue[rxtx] = bitpack(bits) | |
7cf698c5 | 261 | self.putpx(rxtx, ['DATA', rxtx, |
e9a3c933 | 262 | (self.datavalue[rxtx], self.databits[rxtx])]) |
f44d2db2 | 263 | |
6ffd71c1 GS |
264 | b = self.datavalue[rxtx] |
265 | formatted = self.format_value(b) | |
266 | if formatted is not None: | |
267 | self.putx(rxtx, [rxtx, [formatted]]) | |
f44d2db2 | 268 | |
98b89139 UH |
269 | bdata = b.to_bytes(self.bw, byteorder='big') |
270 | self.putbin(rxtx, [rxtx, bdata]) | |
271 | self.putbin(rxtx, [2, bdata]) | |
0bb7bcf3 | 272 | |
c1fc50b1 | 273 | self.databits[rxtx] = [] |
4aedd5b8 | 274 | |
4bb42a91 GS |
275 | # Advance to either reception of the parity bit, or reception of |
276 | # the STOP bits if parity is not applicable. | |
277 | self.state[rxtx] = 'GET PARITY BIT' | |
278 | if self.options['parity_type'] == 'none': | |
279 | self.state[rxtx] = 'GET STOP BITS' | |
280 | ||
6ffd71c1 GS |
281 | def format_value(self, v): |
282 | # Format value 'v' according to configured options. | |
283 | # Reflects the user selected kind of representation, as well as | |
284 | # the number of data bits in the UART frames. | |
285 | ||
286 | fmt, bits = self.options['format'], self.options['num_data_bits'] | |
287 | ||
288 | # Assume "is printable" for values from 32 to including 126, | |
289 | # below 32 is "control" and thus not printable, above 127 is | |
290 | # "not ASCII" in its strict sense, 127 (DEL) is not printable, | |
291 | # fall back to hex representation for non-printables. | |
292 | if fmt == 'ascii': | |
293 | if v in range(32, 126 + 1): | |
294 | return chr(v) | |
295 | hexfmt = "[{:02X}]" if bits <= 8 else "[{:03X}]" | |
296 | return hexfmt.format(v) | |
297 | ||
298 | # Mere number to text conversion without prefix and padding | |
299 | # for the "decimal" output format. | |
300 | if fmt == 'dec': | |
301 | return "{:d}".format(v) | |
302 | ||
303 | # Padding with leading zeroes for hex/oct/bin formats, but | |
304 | # without a prefix for density -- since the format is user | |
305 | # specified, there is no ambiguity. | |
306 | if fmt == 'hex': | |
307 | digits = (bits + 4 - 1) // 4 | |
308 | fmtchar = "X" | |
309 | elif fmt == 'oct': | |
310 | digits = (bits + 3 - 1) // 3 | |
311 | fmtchar = "o" | |
312 | elif fmt == 'bin': | |
313 | digits = bits | |
314 | fmtchar = "b" | |
315 | else: | |
316 | fmtchar = None | |
317 | if fmtchar is not None: | |
318 | fmt = "{{:0{:d}{:s}}}".format(digits, fmtchar) | |
319 | return fmt.format(v) | |
320 | ||
321 | return None | |
322 | ||
97cca21f | 323 | def get_parity_bit(self, rxtx, signal): |
97cca21f | 324 | self.paritybit[rxtx] = signal |
f44d2db2 | 325 | |
ac941bf9 | 326 | if parity_ok(self.options['parity_type'], self.paritybit[rxtx], |
e9a3c933 | 327 | self.datavalue[rxtx], self.options['num_data_bits']): |
15ac6604 | 328 | self.putp(['PARITYBIT', rxtx, self.paritybit[rxtx]]) |
2ce20a91 | 329 | self.putg([rxtx + 4, ['Parity bit', 'Parity', 'P']]) |
f44d2db2 | 330 | else: |
61132abd | 331 | # TODO: Return expected/actual parity values. |
15ac6604 | 332 | self.putp(['PARITY ERROR', rxtx, (0, 1)]) # FIXME: Dummy tuple... |
4e3b276a | 333 | self.putg([rxtx + 6, ['Parity error', 'Parity err', 'PE']]) |
f44d2db2 | 334 | |
4bb42a91 GS |
335 | self.state[rxtx] = 'GET STOP BITS' |
336 | ||
f44d2db2 | 337 | # TODO: Currently only supports 1 stop bit. |
97cca21f | 338 | def get_stop_bits(self, rxtx, signal): |
97cca21f | 339 | self.stopbit1[rxtx] = signal |
f44d2db2 | 340 | |
5cc4b6a0 | 341 | # Stop bits must be 1. If not, we report an error. |
97cca21f | 342 | if self.stopbit1[rxtx] != 1: |
15ac6604 | 343 | self.putp(['INVALID STOPBIT', rxtx, self.stopbit1[rxtx]]) |
76a4498f | 344 | self.putg([rxtx + 10, ['Frame error', 'Frame err', 'FE']]) |
5cc4b6a0 | 345 | # TODO: Abort? Ignore the frame? Other? |
f44d2db2 | 346 | |
15ac6604 | 347 | self.putp(['STOPBIT', rxtx, self.stopbit1[rxtx]]) |
2ce20a91 | 348 | self.putg([rxtx + 4, ['Stop bit', 'Stop', 'T']]) |
f44d2db2 | 349 | |
4bb42a91 GS |
350 | self.state[rxtx] = 'WAIT FOR START BIT' |
351 | ||
03a986ea GS |
352 | def handle_break(self, rxtx): |
353 | self.putpse(self.frame_start[rxtx], self.samplenum, | |
354 | ['BREAK', rxtx, 0]) | |
355 | self.putgse(self.frame_start[rxtx], self.samplenum, | |
356 | [rxtx + 14, ['Break condition', 'Break', 'Brk', 'B']]) | |
357 | self.state[rxtx] = 'WAIT FOR START BIT' | |
358 | ||
dcd3d626 | 359 | def get_wait_cond(self, rxtx, inv): |
0b83932c UH |
360 | # Return condititions that are suitable for Decoder.wait(). Those |
361 | # conditions either match the falling edge of the START bit, or | |
362 | # the sample point of the next bit time. | |
dcd3d626 GS |
363 | state = self.state[rxtx] |
364 | if state == 'WAIT FOR START BIT': | |
365 | return {rxtx: 'r' if inv else 'f'} | |
366 | if state == 'GET START BIT': | |
367 | bitnum = 0 | |
368 | elif state == 'GET DATA BITS': | |
369 | bitnum = 1 + self.cur_data_bit[rxtx] | |
370 | elif state == 'GET PARITY BIT': | |
371 | bitnum = 1 + self.options['num_data_bits'] | |
372 | elif state == 'GET STOP BITS': | |
373 | bitnum = 1 + self.options['num_data_bits'] | |
374 | bitnum += 0 if self.options['parity_type'] == 'none' else 1 | |
0b83932c UH |
375 | want_num = ceil(self.get_sample_point(rxtx, bitnum)) |
376 | return {'skip': want_num - self.samplenum} | |
dcd3d626 | 377 | |
0de2810f | 378 | def inspect_sample(self, rxtx, signal, inv): |
0b83932c | 379 | # Inspect a sample returned by .wait() for the specified UART line. |
0de2810f GS |
380 | if inv: |
381 | signal = not signal | |
382 | ||
383 | state = self.state[rxtx] | |
384 | if state == 'WAIT FOR START BIT': | |
385 | self.wait_for_start_bit(rxtx, signal) | |
386 | elif state == 'GET START BIT': | |
387 | self.get_start_bit(rxtx, signal) | |
388 | elif state == 'GET DATA BITS': | |
389 | self.get_data_bits(rxtx, signal) | |
390 | elif state == 'GET PARITY BIT': | |
391 | self.get_parity_bit(rxtx, signal) | |
392 | elif state == 'GET STOP BITS': | |
393 | self.get_stop_bits(rxtx, signal) | |
394 | ||
03a986ea GS |
395 | def inspect_edge(self, rxtx, signal, inv): |
396 | # Inspect edges, independently from traffic, to detect break conditions. | |
397 | if inv: | |
398 | signal = not signal | |
399 | if not signal: | |
400 | # Signal went low. Start another interval. | |
401 | self.break_start[rxtx] = self.samplenum | |
402 | return | |
403 | # Signal went high. Was there an extended period with low signal? | |
404 | if self.break_start[rxtx] is None: | |
405 | return | |
406 | diff = self.samplenum - self.break_start[rxtx] | |
407 | if diff >= self.break_min_sample_count: | |
408 | self.handle_break(rxtx) | |
409 | self.break_start[rxtx] = None | |
410 | ||
dcd3d626 | 411 | def decode(self): |
21cda951 UH |
412 | if not self.samplerate: |
413 | raise SamplerateError('Cannot decode without samplerate.') | |
2fcd7c22 | 414 | |
dcd3d626 GS |
415 | has_pin = [self.has_channel(ch) for ch in (RX, TX)] |
416 | if has_pin == [False, False]: | |
417 | raise ChannelError('Either TX or RX (or both) pins required.') | |
418 | ||
419 | opt = self.options | |
420 | inv = [opt['invert_rx'] == 'yes', opt['invert_tx'] == 'yes'] | |
03a986ea GS |
421 | cond_data_idx = [None] * len(has_pin) |
422 | ||
423 | # Determine the number of samples for a complete frame's time span. | |
424 | # A period of low signal (at least) that long is a break condition. | |
425 | frame_samples = 1 # START | |
426 | frame_samples += self.options['num_data_bits'] | |
427 | frame_samples += 0 if self.options['parity_type'] == 'none' else 1 | |
428 | frame_samples += self.options['num_stop_bits'] | |
429 | frame_samples *= self.bit_width | |
430 | self.break_min_sample_count = ceil(frame_samples) | |
431 | cond_edge_idx = [None] * len(has_pin) | |
dcd3d626 GS |
432 | |
433 | while True: | |
434 | conds = [] | |
435 | if has_pin[RX]: | |
03a986ea | 436 | cond_data_idx[RX] = len(conds) |
dcd3d626 | 437 | conds.append(self.get_wait_cond(RX, inv[RX])) |
03a986ea GS |
438 | cond_edge_idx[RX] = len(conds) |
439 | conds.append({RX: 'e'}) | |
dcd3d626 | 440 | if has_pin[TX]: |
03a986ea | 441 | cond_data_idx[TX] = len(conds) |
dcd3d626 | 442 | conds.append(self.get_wait_cond(TX, inv[TX])) |
03a986ea GS |
443 | cond_edge_idx[TX] = len(conds) |
444 | conds.append({TX: 'e'}) | |
dcd3d626 | 445 | (rx, tx) = self.wait(conds) |
03a986ea | 446 | if cond_data_idx[RX] is not None and self.matched[cond_data_idx[RX]]: |
0de2810f | 447 | self.inspect_sample(RX, rx, inv[RX]) |
03a986ea GS |
448 | if cond_edge_idx[RX] is not None and self.matched[cond_edge_idx[RX]]: |
449 | self.inspect_edge(RX, rx, inv[RX]) | |
450 | if cond_data_idx[TX] is not None and self.matched[cond_data_idx[TX]]: | |
0de2810f | 451 | self.inspect_sample(TX, tx, inv[TX]) |
03a986ea GS |
452 | if cond_edge_idx[TX] is not None and self.matched[cond_edge_idx[TX]]: |
453 | self.inspect_edge(TX, tx, inv[TX]) |