Difference between revisions of "UNI-T UT325/Info"
Jump to navigation
Jump to search
(Created page with "===Lsusb=== This is Linux '''lsusb''' output: <small> $ '''lsusb -vvv''' Bus 002 Device 002: ID '''1a86:e008 QinHeng Electronics HID-based serial adapater''' Device Descr...") |
|||
| Line 1: | Line 1: | ||
=== | === lsusb === | ||
This is Linux '''lsusb''' output: | This is Linux '''lsusb''' output: | ||
Revision as of 11:02, 10 July 2012
lsusb
This is Linux lsusb output:
$ lsusb -vvv
Bus 002 Device 002: ID 1a86:e008 QinHeng Electronics HID-based serial adapater
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x1a86 QinHeng Electronics
idProduct 0xe008 HID-based serial adapater
bcdDevice 11.00
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 41
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.00
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 37
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 5
Device Status: 0x000a
(Bus Powered)
Remote Wakeup Enabled