Difference between revisions of "Rohde&Schwarz RT series"

From sigrok
Jump to: navigation, search
(Initial Rohde&Schward RT series page)
 
m (Clarify that RT series is actually multiple series)
 
Line 17: Line 17:
 
}}
 
}}
  
The '''Rohde&Schwarz RT series''' are 50MHz-1GHz, 2-5GSa/s, 2 or 4 analog channels and 8 or 16 digital channels mixed-signal oscilloscopes.
+
The '''Rohde&Schwarz RT series''' actually consists of multiple series such as: RTC, RTB, RTM and RTA. The several different models are 50MHz-1GHz, 2-5GSa/s, 2 or 4 analog channels and 8 or 16 digital channels mixed-signal oscilloscopes.
  
 
All models support different extension modules which provide different connectivity options.
 
All models support different extension modules which provide different connectivity options.

Latest revision as of 13:07, 9 January 2020

Rohde&Schwarz RT
Status supported
Source code hameg-hmo
Channels 2 or 4 analog, 8 or 16 digital
Samplerate 2-5GSa/s
Analog bandwidth 50MHz-1GHz (depending on model)
Vertical resolution 8 bits (HiRes up to 16 bits)
Triggers slope, pulse width, logic, video, risetime, runt, serial bus (optional)
Input impedance 1MΩ‖13pF 200Vp CAT I, 50Ω 5V RMS
Memory 2-200 Mpts (depending on model and number of channels used)
Display depends on model
Connectivity USB host/device, Ethernet, RS232 (optional), GPIB (optional)
Features math (+, —, x, /), FFT, pattern generator, statistics, frequency counter, digital voltmeter, vertical sensitivity: 1mV/div - 5V/div
Website [1]

The Rohde&Schwarz RT series actually consists of multiple series such as: RTC, RTB, RTM and RTA. The several different models are 50MHz-1GHz, 2-5GSa/s, 2 or 4 analog channels and 8 or 16 digital channels mixed-signal oscilloscopes.

All models support different extension modules which provide different connectivity options.

All models come with analog probes (specific probe might depend on the scope capabilities).

Digital probes (8 or 16 channels) are optional and can be purchased separately.

Devices

Model Bandwidth Analog Channels Digital Channels
RTC1000 50-300MHz 2 8
RTB2000 70-300MHz 2/4 16
RTM3000 100MHz-1GHz 2/4 16
RTA4000 200MHz-1GHz 4 16

Protocol

All the devices use the SCPI protocol (for reference, see the "SCPI Programmers Manual").

The serial parameters are configurable on the device, the standard settings are: 115200 baud, 8n1, no handshake, no flow control.

All models support USB connection to the computer in both TMC and VPC mode, as well as Ethernet connection (raw TCP over a user-configurable port).

Resources