Rigol DS4000 series

From sigrok
Revision as of 18:20, 29 December 2018 by Apo (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Rigol DS4000/MSO4000 Series
Status supported
Channels analog: 2 or 4, digital (MSO4000 series): 16
Samplerate analog: 4GSa/s (interleaved), 2GSa/s (non-interleaved); digital: 1GSa/s
Analog bandwidth 100-500MHz (depending on model)
Vertical resolution 8bits
Triggers edge, pulse, runt, nth edge, slope, video, pattern, RS232/UART, I²C, SPI, CAN, FlexRay, USB
Input impedance 1MΩ‖15pF or 50Ω 300V RMS CAT I analog, 101kΩ‖9pF digital
Memory 70/140 Mpts analog (mode/ch-dependent), 28 Mpts/channel (digital)
Display 9 Inch WVGA (800x480) 160,000 colours
Connectivity USB host/device, ethernet (LXI), aux out (trigger, fast, pass/fail, GND), VGA
Features math: +, —, x, /, FFT, digital filters, editable advanced operations, logic; vertical sensitivity: 1 mV/div to 5 V/div
Website rigolna.com

The Rigol DS4000 Series are 4-channel oscilloscopes with an analog bandwidth of 100-500MHz and 4GSa/s maximum sampling rate.

See Rigol DS4000 series/Info for more detailed information on the device.


The device uses USBTMC or LXI via its Ethernet port for communication with a host PC. The protocol is based on SCPI commands.