Rigol DS2072

From sigrok
Revision as of 15:28, 19 October 2014 by Jman (talk | contribs) (Add sigrok-cli examples for using SCPI over LAN)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Rigol DS2072
Rigol-ds2072 mugshot.png
Status supported
Source code rigol-ds
Channels 2
Samplerate 2GSa/s (1ch), 1GSa/s (2ch)
Analog bandwidth 70MHz (upgradable up to 300 MHz)
Vertical resolution 8bits
Triggers edge, pulse, runt, windows, nth edge, slope, video, pattern, delay, timeout, duration, setup/hold, RS232/UART, I²C, SPI, CAN, USB
Input impedance 1MΩ‖16pF 300V RMS CAT I
Memory 56Mpts (mode/ch-dependent)
Display 8" 800x480, 160K colors
Connectivity USB host/device, ethernet, trigger out, pass/fail out
Features math: +, —, x, /, FFT, vertical sensitivity: 500µV/div - 10V/div
Website rigolna.com

The Rigol DS2072 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 70MHz and 2GS/s sampling rate.

See Rigol DS2072/Info for more details (such as lsusb -v output) about the device.

See Rigol DS2000 series for information common to all devices in this series.

Photos

Protocol

Example of using SCPI over LAN:

sigrok-cli -d rigol-ds:conn=tcp-raw/192.168.3.16/5555 -l 5 --scan
sigrok-cli -d rigol-ds:conn=tcp-raw/192.168.3.16/5555 --frames 1 -O analog


More Info