Difference between revisions of "Owon XDM2041"

**Owon XDM2041**
Status	in progress
Source code	scpi-dmm
Counts	55000
IEC 61010-1	CAT I (1000V) / CAT II (600V)
Connectivity	RS232
Measurements	voltage, current, resistance, capacitance, diode, frequency, continuity, temperature
Features	autorange, true RMS, data hold, min/max/avg, relative, four-wire resistance, dual display, record
Website	owon.com.hk

Revision as of 15:41, 28 February 2021

The Owon XDM2041 is a 55000 count (4.5 digits), 0.025% accuracy, 65 readings/s benchtop digital multimeter with RS232 connectivity.

Also sold rebranded as PeakTech 4095.

Protocol is SCPI over RS232. Manufacturer manual is available here: Programming manual for XDM2041 Digital Multimeter.

Notes:

The XDM2041 does not support *OPC? command, which SCPI standard specifies should report whether operation is complete.
The programming manual does not specify how to run / stop measurement.
The programming manual does not specify how to retrieve recorded data or how to configure one.

There is Windows software available that could be used to check whether there are extra commands.

@@ Line 19: / Line 19: @@
 Protocol is SCPI over RS232. Manufacturer manual is available here: [http://files.owon.com.cn/probook/XDM2041_Digital_Multimeter_Programming_Manual.pdf Programming manual for XDM2041 Digital Multimeter].
+Notes:
+* The XDM2041 does not support '''*OPC?''' command, which SCPI standard specifies should report whether operation is complete.
+* The programming manual does not specify how to run / stop measurement.
+* The programming manual does not specify how to retrieve recorded data or how to configure one.
+There is Windows software available that could be used to check whether there are extra commands.