Mcupro Logic16 clone

From sigrok
Jump to navigation Jump to search


mcupro Saleae16
Status planned
Source code saleae-logic16
Channels 3/6/9/16
Samplerate 100/50/32/16MHz
Samplerate (state)
Triggers none (SW-only)
Min/max voltage -0.9V — 6V
Threshold voltage configurable:
for 1.8V to 3.6V systems: VIH=1.4V, VIL=0.7V
for 5V systems: VIH=3.6V, VIL=1.4V
Memory none
Compression yes
Website [1]

The mcupro Saleae16 is a USB-based, 16-channel logic analyzer with 100/50/32/16MHz sampling rate (at 3/6/9/16 enabled channels).

This is a clone of the Saleae Logic16.

See Mcupro Saleae16/Info for more details (such as lsusb -vvv output) about the device.

Hardware

Operation

This logic analyzer works with unmodified Saleae software. The Actel FPGA has on-chip flash storage, so it appears that it only requires an upload of Cypress FX2LP firmware in order to operate.

Photos

Mcupro Logic16 case top.jpeg Mcupro Logic16 case bottom.jpeg

Mcupro Logic16 top.jpeg Mcupro Logic16 bottom.jpeg

Protocol

See Saleae_Logic16#Protocol.