Difference between revisions of "Hantek iDSO1070"
Jump to navigation
Jump to search
Martinloren (talk | contribs) (Created page with "{{Infobox oscilloscope | image = 180px | name = Hantek iDSO1070 | status = planned | channels...") |
(No difference)
|
Revision as of 05:28, 23 March 2018
Status | planned |
---|---|
Source code | [1] |
Channels | 2 |
Samplerate | 125MHz |
Analog bandwidth | 70MHz |
Vertical resolution | 8bit |
Triggers | none (SW-only) |
Input impedance | 1MΩ‖25pF |
Memory | none |
Display | none |
Connectivity | USB / Wifi |
Website | hantek.com |
The Hantek iDSO1070 is a self powered, 2-channel oscilloscope with an analog bandwidth of 70MHz with 125MSa/s sampling rate.
See Hantek iDSO1070/Info for more details (such as lsusb -v output) about the device.
Hardware
- Main chip: Xilinx Spartan XC3S50A (datasheet)
- Main oscillator: 50MHz 50.000 YX FH
Photos
Protocol
See Reverse Engineered Protocol.
When the "Refresh" button is not pressed, the device run in Wifi mode, when "Refresh" button is kept pressed at boot it run in USB mode.