Difference between revisions of "DreamSourceLab DSLogic Plus"

From sigrok
Jump to navigation Jump to search
m (Different memory chip in the later version)
Line 49: Line 49:
File:Dreamsourcelab dslogic plus cable 5.jpg
File:Dreamsourcelab dslogic plus cable 5.jpg
File:Dreamsourcelab dslogic plus probe circuit.png|<small>Probe cable circuit</small>
File:Dreamsourcelab dslogic plus probe circuit.png|<small>Probe cable circuit</small>
File:Dreamsourcelab dslogic plus cable B xray 1.jpg|<small>Revised Probe cable</small>
File:Dreamsourcelab dslogic plus cable B xray 2.jpg|<small>Revised Probe cable</small>
</gallery>
</gallery>



Revision as of 18:32, 21 October 2019

DreamSourceLab DSLogic Plus
DSLogic.png
Status supported
Source code dreamsourcelab-dslogic
Channels 1-16
Samplerate 400MHz(4ch), 200MHz(8ch), 100MHz(16ch)
Samplerate (state) 30MHz (?) or 50MHz (?)
Triggers high, low, rising, falling, edge, multi-stage triggers
Min/max voltage -0.6V — 6V, +-30V with provided probe-wires
Threshold voltage configurable: 0-5V (0.1V increments)
Memory 256MBit
Compression yes
Website dreamsourcelab.com

The DreamSourceLab DSLogic Plus is a 16-channel USB-based logic analyzer, with sampling rates up to 400MHz (when using only 4 channels). This differs slightly from the original DSLogic product in its configurable threshold voltage and different PCB layout. DreamSourceLab doesn't make the distinction between these two products very clear on their website.

See DreamSourceLab DSLogic Plus/Info for more details (such as lsusb -v output) about the device.

Hardware

Photos

Device:

Cables:

Firmware

See DreamSourceLab DSLogic#Firmware.

Resources