Difference between revisions of "DreamSourceLab DSLogic"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
| status = planned | | status = planned | ||
| channels = 1-16 | | channels = 1-16 | ||
| samplerate = 200MHz ( | | samplerate = 100MHz or less(16 chan), 200MHz(8 chan), 400MHz(4 chan) | ||
| voltages = -0.9V — 6V | | voltages = -0.9V — 6V | ||
| threshold = configurable: 3.3V, 5V | | threshold = configurable: 3.3V, 5V | ||
Revision as of 19:58, 25 May 2014
 | |
| Status | planned |
|---|---|
| Source code | [1] |
| Channels | 1-16 |
| Samplerate | 100MHz or less(16 chan), 200MHz(8 chan), 400MHz(4 chan) |
| Min/max voltage | -0.9V — 6V |
| Threshold voltage | configurable: 3.3V, 5V |
| Memory | 32MB |
| Website | dreamsourcelab.com |
The DreamSourceLab DSLogic is a 16-channel USB-based logic analyzer, with sampling rates up to 200MHz (when using only 1 channel).
See DreamSourceLab DSLogic/Info for more details (such as lsusb -vvv output) about the device.
Hardware
- Xilinx XC6SLX9 Spartan-6 FPGA (TQG144BIV13337)
- Micron MT48LC16M16A2P-6A 32MB SDRAM (IC SDRAM 256MBIT 167MHZ TSOP)
- Cypress CY7C68013A FX2 USB interface chip (IC MCU USB PERIPH HI SPD 56SSOP)
- Serial EEPROM 16Kbit U4: ATMLH348 16CM Y 3X3098, I2C/2Wire Serial EEPROM 16Kbit (2048x8) ATMEL AT24C16C
- ESD Protection U9,10,11,12,13,14 D234 ESD Protection CM1213A-04S7 TVS DIODE 3.3VWM 10VC SC746
- 1.2V 600mA LDO U32 SBPB 1.2V 600mA 2MHz Step Down DC-DC Converter LM3671MF-1.2/NOPB
- 3.3V 600mA LDO U31 SJEB 3.3V 600mA 2MHz Step Down DC-DC Converter LM3671MF-3.3/NOPB
