Agilent 34410A
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
| Status | supported |
|---|---|
| Source code | scpi-dmm |
| Counts | 10000 |
| IEC 61010-1 | CAT II (300V) |
| Connectivity | LAN LXI class C, USB TMC, GPIB |
| Measurements | voltage, current, resistance, capacitance, diode, frequency, period, continuity, temperature |
| Features | autorange, true RMS, data hold, min/max/avg/sdev, relative, four-wire resistance, front/rear terminals, external trigger |
| Website | [1] |
The 34410A is a replacement for the HP/Agilent/Keysight 34401A with higher performance but retaining a compatible protocol. It's a benchtop multimeter with LAN/USB/GPIB as standard.
It was discontinued on 2016-12-01 and is now replaced by the Keysight_34465A.
Example use
Scan for connected devices:
$ sigrok-cli -d scpi-dmm --scan
If other supported models, multiple devices of the same type are connected, or for Ethernet connections:
$ sigrok-cli -d scpi-dmm:conn=0957.0607 --scan $ sigrok-cli -d scpi-dmm:conn=3.15 --scan $ sigrok-cli -d scpi-dmm:conn=tcp-raw/1.2.3.4/5025 --scan
See Connection parameters for more details.
Check the capabilities of the meter's driver, and current state of settings:
$ sigrok-cli -d scpi-dmm --show
Get or set the meter's current function:
$ sigrok-cli -d scpi-dmm --get measured_quantity $ sigrok-cli -d scpi-dmm -c measured_quantity=voltage/dc --set
Acquire measurement data, in the current mode or in another specified mode:
$ sigrok-cli -d scpi-dmm --continuous $ sigrok-cli -d scpi-dmm --time 10s $ sigrok-cli -d scpi-dmm --samples 10 -c measured_quantity=current/dc