Difference between revisions of "Agilent 34405A"

**Agilent 34405A**
Status	supported
Source code	scpi-dmm
Counts	120000
IEC 61010-1	CAT II (300V) / CAT I (1000VDC)
Connectivity	USB (USBTMC)
Measurements	voltage, current, resistance, capacitance, frequency, temperature, diode, continuity
Features	autorange, true RMS, data hold, relative
Website	keysight.com

Revision as of 09:04, 16 November 2018

The Agilent 34405A is a 120000 count CAT II (300V) / CAT I (1000VDC) bench multimeter with USB (USBTMC) connectivity.

See Agilent 34405A/Info for USB profile information.

Scan for connected devices:

 $ sigrok-cli -d scpi-dmm --scan

If other supported models or multiple devices of the same type are connected:

 $ lsusb
 $ sigrok-cli -d scpi-dmm:conn=0957.0618 --scan
 $ sigrok-cli -d scpi-dmm:conn=3.15 --scan

Get or set the meter's current function:

 $ sigrok-cli -d scpi-dmm --get measured_quantity
 $ sigrok-cli -d scpi-dmm -c measured_quantity=voltage/dc --set

Take measurements, in the current mode or in another specified mode:

 $ sigrok-cli -d scpi-dmm --continuous
 $ sigrok-cli -d scpi-dmm --time 10s
 $ sigrok-cli -d scpi-dmm -c measured_quantity=current/dc --samples 10

@@ Line 21: / Line 21: @@
 File:Agilent 34405A back.png
 </gallery>
+== Example use ==
+Scan for connected devices:
+  $ sigrok-cli -d scpi-dmm --scan
+If other supported models or multiple devices of the same type are connected:
+  $ lsusb
+  $ sigrok-cli -d scpi-dmm:conn=0957.0618 --scan
+  $ sigrok-cli -d scpi-dmm:conn=3.15 --scan
+Get or set the meter's current function:
+  $ sigrok-cli -d scpi-dmm --get measured_quantity
+  $ sigrok-cli -d scpi-dmm -c measured_quantity=voltage/dc --set
+Take measurements, in the current mode or in another specified mode:
+  $ sigrok-cli -d scpi-dmm --continuous
+  $ sigrok-cli -d scpi-dmm --time 10s
+  $ sigrok-cli -d scpi-dmm -c measured_quantity=current/dc --samples 10
 == Resources ==