Rigol DS2072
Jump to navigation
Jump to search
 | |
| Status | supported |
|---|---|
| Source code | rigol-ds |
| Channels | 2 |
| Samplerate | 2GSa/s (1ch), 1GSa/s (2ch) |
| Analog bandwidth | 70MHz (upgradable up to 300 MHz) |
| Vertical resolution | 8bits |
| Triggers | edge, pulse, runt, windows, nth edge, slope, video, pattern, delay, timeout, duration, setup/hold, RS232/UART, I²C, SPI, CAN, USB |
| Input impedance | 1MΩ‖16pF 300V RMS CAT I |
| Memory | 56Mpts (mode/ch-dependent) |
| Display | 8" 800x480, 160K colors |
| Connectivity | USB host/device, ethernet, trigger out, pass/fail out |
| Features | math: +, —, x, /, FFT, vertical sensitivity: 500µV/div - 10V/div |
| Website | rigolna.com |
The Rigol DS2072 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 70MHz and 2GS/s sampling rate.
See Rigol DS2072/Info for more details (such as lsusb -v output) about the device.
See Rigol DS2000 series for information common to all devices in this series.
Photos
Device, front
Device, back
Connectors on left side
Device, right side
Device showing a waveform
Protocol
Example of using SCPI over LAN:
sigrok-cli -d rigol-ds:conn=tcp-raw/192.168.3.16/5555 -l 5 --scan sigrok-cli -d rigol-ds:conn=tcp-raw/192.168.3.16/5555 --frames 1 -O analog