Hantek 4032L
Jump to navigation
Jump to search
 | |
| Status | planned |
|---|---|
| Channels | 32 |
| Samplerate | 400MHz |
| Samplerate (state) | ? |
| Triggers | edge, pattern, pattern duration, combined |
| Min/max voltage | -6V — +60V input, -6V — +6V threshold |
| Memory | 256MiB |
| Compression | - |
| Website | hantek.com |
The Hantek 4032L is a USB-based, 32-channel logic analyzer with up to 400MHz sampling rate and 256MiB memory.
See Hantek_4032L/Info for more details about the device.
Hardware
- Xilinx Spartan-6 XC6SLX16 CSG324 DIV1225 (FPGA, 14579 logic cells, 2 DDR1/2/3 memory controllers, BGA324)
- Cypress FX2LP CY7C68013A-100AXC (USB 2.0 HS controller, TQFP100)
- 2x Micron MT47H64M16HR-25E:H (1Gbit DDR2 SDRAM, BGA)
- TI TPS51116 (DDR memory power controller)
- Unknown I2C EEPROM (marking removed, contains FX2 firmware)
- MXIC MX25L4005 (4Mbit SPI flash, marking removed, contains FPGA bitstream)
Photos
Hantek 4032L with probes
Probe port side
PC USB port side
PCB, top
PCB, bottom
Protocol
- Vendor request is used to reset the engine and flush the buffers
- Endpoint 2 is used for host-to-device command/parameters transfers
- Endpoint 6 is used for device-to-host status/data transfers
TODO.