Pico Technology PicoScope 5203

PicoScope 5203.

The Pico Technology PicoScope 5203 is a 2-channel USB-based PC oscilloscope (and spectrum analyzer and data logger and logic analyzer). It supports a bandwidth of 250 MHz. The max. sampling rate (one-shot) is 1 GS/s (one channel mode) or 500 MS/s (two channel mode). The max. sampling rate for repetitive signals is 20 GS/s, the max. sampling rate in continuous streaming mode is 1 MS/s.

See Pico Technology PicoScope 5203/Info for more details (such as lsusb -vvv output) about the device.

Components

• 2 x Micron D9JLR DDR2 SDRAM 512M (32Mx16)
• Xilinx Spartan XC3S400
• microchip LC24641 EEPROM for usb id
• Cypress CY7C68013A-56PVXC (FX2) USB interface
• Texas Instruments ADC08D500 High Performance, Low Power, Dual 8-Bit, 500 MSPS A/D Converter
• Analog Devices AD9742 12-Bit, 210 MSPS TxDAC® D/A Converter
• Analog Devices ADCMP562 high speed comparator
• 3 x pca9557
• 4 x omron g6h-2-100
• 3 x MEDER electronic SILO5-1A72-71DHR

More photos

• 

  Front

• 

  Back

• Picoscope 5203 pcb front.jpg

  PCB front

• Picoscope 5203 pcb back.jpg

  PCB back

Protocol

Voltage ranges

±100 mV to ±20 V in 8 ranges