Kingst LA2016
 | |
| Status | supported |
|---|---|
| Source code | kingst-la2016 |
| Channels | 16 |
| Samplerate | 200MHz |
| Samplerate (state) | — |
| Triggers | none (SW-only) |
| Min/max voltage | -50V — 50V |
| Threshold voltage |
configurable: -4V—4V, min step 0.01V |
| Memory | 128MByte DDR2 SDRAM |
| Compression | yes |
| Website | qdkingst.com |
The Kingst LA2016 is a USB-based, 16-channel logic analyzer with 200MHz sampling rate.
The vendor is "Qingdao Kingst Electronics Co., Ltd." according to the user guide, and the vendor software can be downloaded from a website with "kingst" in the name. The device housing reads "Jiankun" however, not "Kingst".
See Kingst LA2016/Info for more details (such as lsusb -v output) about the device.
Hardware
The IC marked PFNI is a http://www.ti.com/lit/ds/symlink/tps60403.pdf
Photos
Package contents
Paper
Device, top
Device, bottom
PCB, top
PCB, bottom
Cypress FX2
Altera Cyclone IV
Samsung K4T1G164QG
Atmel 24C02N
Unmarked IC
PFNI
Firmware
In order to use this device you need to extract the firmware/FPGA files from the vendor software (Linux download) using the sigrok-fwextract-kingst-la2016 script from the sigrok-util repo and place them in one of the usual places where libsigrok expects firmware files:
$ ./sigrok-fwextract-kingst-la2016 KingstVIS/KingstVIS saved 180224 bytes to kingst-la2016a-fpga.bitstream saved 5350 bytes to kingst-la-01a1.fw saved 5430 bytes to kingst-la-01a2.fw saved 5718 bytes to kingst-la-01a3.fw saved 142412 bytes to kingst-la-01a4.fw saved 5452 bytes to kingst-la-03a1.fw