RDTech TC66C

RDTech TC66C

Status	unsupported
Source code	[1]
Connectivity	serial over Bluetooth or USB
Measurements	voltage, current, power, energy, voltage over USB data lines
Features	measures USB-C devices; color display
Website	rdtech.aliexpress.com

The RDTech TC66C (~$25 USD) is a USB-C load meter which can measure various properties of USB-C devices including their voltage, amperage, wattage, resistance, capacity, temperature, data line voltage, and charging mode. This device is similar to the RDTech UM series of devices, but doesn't use the same protocol.

Protocol (serial)

Command	Mode	Resp. len.	Meaning
query	All	4	Query mode ('firm' or 'boot')
getva	Normal	192	Poll readings. (ret: pacX)
gtrec	Normal	Variable	Get recording.
lastp	Normal	0	Previous page.
nextp	Normal	0	Next page.
rotat	Normal	0	Rotate screen.
update	Boot	5	Prepare to upload firmware. Returns 'uprdy'.

Protocol (Bluetooth LE)

Transport

UUID	What
0000ffe5-0000-1000-8000-00805f9b34fb	TX service
0000ffe9-0000-1000-8000-00805f9b34fb	TX attribute
0000ffe0-0000-1000-8000-00805f9b34fb	RX service
0000ffe4-0000-1000-8000-00805f9b34fb	RX attribute

Transmission to the device is implemented by writing to the TX attribute in the TX service. RX is implemented by listening for notifications from the RX attribute in the RX service.

Commands

Command	Resp. len.	Meaning
bgetva\r\n	192	Poll readings.
blastp\r\n	0	Previous page.
bnextp\r\n	0	Next page.
brotat\r\n	0	Rotate screen.

Poll data format

Poll data is returned as Returns 3x64 byte blocks of data, a total of 192 bytes. Each block is prefixed by pacX The returned data is encrypted using AES in ECB mode.

pac1

Offset	Type	Meaning
0	char[4]	pac1
4	char[4]	Product name (TC66)
8	char[4]	Version (e.g., 1.14)
12	uint32_t	Module serial number
16-43	Unknown	Unknown
44	uint32_t	Number of runs
48	uint32_t	Voltage (multiply by 1e-4 for Volt)
52	uint32_t	Current (multiply by 1e-5 for Ampere)
56	uint32_t	Power (multiply by 1e-4 for Watt)
60-63	uint32_t	Checksum

pac2

Offset	Type	Meaning
0	char[4]	pac2
4	uint32_t	Resistance (multiply by 1e-2 for Ohm)
8	uint32_t	Group 0 mAh
12	uint32_t	Group 0 mWh
16	uint32_t	Group 1 mAh
20	uint32_t	Group 1 mWh
24	uint32_t	Temperature sign (1 for negative)
28	uint32_t	Temperature (Celsius or Fahrenheit)
32	uint32_t	D+ Voltage (multiply by 1e-2 for Volt)
36	uint32_t	D- Voltage (multiply by 1e-2 for Volt)
40-59	Unknown	Always zero?
60-63	uint32_t	Checksum

pac3

Offset	Type	Meaning
0	char[4]	pac3
4-59	Unknown	Always zero?
60-63	uint32_t	Checksum

Checksum algorithm

Checksums are implemented using CRC-16/MODBUS zero-extended to fit a 32-bit field.

Recording format (gtrec)

Recordings dumped using the gtrec command are returned as a list of 32-bit unsigned integer pairs terminated by reck. The first value in the pair is the voltage (multiply by 1e-4 to get voltage) and the second value is the current (multiply by 1e-5 to get Ampere).

Firmware update

Firmware update process:

• Issue a query command to verify that the boot loader is active.
• Issue the update command, wait for uprdy.
• Write firmware in blocks of 64 bytes (the last block may be shorter than 64 bytes). Each block is acknowledged with an OK response.
• Device reboots automatically.

Useful URLs:

• Firmware metadata: http://www.ruidengkeji.com/rdupdate/firmware/TC66/TC66.json
• Firmware binary: http://www.ruidengkeji.com/rdupdate/firmware/TC66/TC66.bin