Hobby Components HCTEST0006

From sigrok
Revision as of 21:49, 24 January 2018 by Karlp (talk | contribs) (drop template link to "lsusb output" not relevant for fx2lafw stock device)
Jump to navigation Jump to search
Hobby Components HCTEST0006
Hobby components hctest0006 mugshot.png
Status supported
Source code fx2lafw
Channels 8
Samplerate 24MHz
Samplerate (state)
Triggers none (SW-only)
Min/max voltage -0.5V — 5.25V
Threshold voltage Fixed: VIH=2.0V—5.25V, VIL=-0.5V—0.8V
Memory none
Compression none
Website hobbycomponents.com

The Hobby Components HCTEST0006 is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.

This device ships with the official sigrok fx2lafw VID/PID in its I²C EEPROM, thus can (only) be used with the fully open-source fx2lafw firmware and the sigrok software stack.

Hardware

  • Main chip: Cypress CY7C68013A-56LTXI (FX2LP)
  • Input buffer: NXP 74HC245 (markings: "NXP HC245 ED54008 TXD449E")
  • 256-byte I²C EEPROM: Atmel AT24C02 (markings: "ATMEL450 24C02BN SU27 D")
  • 3.3V low-dropout voltage regulator: Advanced Monolithic Systems AMS1117-3.3 (markings: "AMS1117 3.3 H1418")
  • 24MHz crystal: 24.000

Photos

Protocol

This device (only) uses the open-source fx2lafw firmware with the corresponding USB protocol.

Resources