Hantek DSO-2250

From sigrok
Revision as of 05:53, 12 March 2013 by Squix (talk | contribs)
Jump to navigation Jump to search
Hantek DSO-2090

The Hantek DSO-2250 is an inexpensive USB-based oscilloscope. It has 2 channels, an analog bandwidth of 100MHz and 250MS/s sampling rate.

See Hantek DSO-2250/Info for more details (such as lsusb -vvv output) about the device.

For more information about the devices in Hantek's USB oscilloscope devices, see Hantek DSO-2xxx/52xx.

Hardware

  • Xilinx SPARTAN XC3S50AN
  • 100 MHz oscillator
  • Cypress CY7C68013A (FX2)
  • 2 x ISSI IS61LV5128AL (512K SRAM)
  • Microchip 24LC0281 (FX2 EEPROM)

MAX4547 Bidirection RF Video Switch 54286 9CTG4 (1Khz 2VPP signal gen?) HC244SJ - octal buffer / line driver?

Input stage:

Per channel:

  • HEF4052B (dual 4-channel analog mux/demux)
  • Calogic SST5912 (N-Channel Monolithic JFET)
  • 3 x Forward Relay PL-5 (relays)

Photos

  • Hantek DSO-2090

  • Probe connectors

  • USB and calibration points

  • PCB

  • PCB back

  • Xilinx CPLD

  • Analog mux/demux

  • JFET switch

  • Cypress FX2 USB interface

  • FX2 EEPROM

  • Mux 2

  • RAM

  • Input stage

Protocol

See Hantek_DSO-2xxx/52xx#Protocol.

Extracting the firmware

See Hantek_DSO-2xxx/52xx#Extracting_the_firmware.

Resources

TODO.

Retrieved from "https://sigrok.org/w/index.php?title=Hantek_DSO-2250&oldid=6028"