Fx2lafw
fx2lafw is an open-source firmware for Cypress FX2 chips which makes them usable as simple logic analyzer hardware.
It is licensed under the terms of the GNU GPL (version 2, or later) and written in C, using sdcc as compiler, and fx2lib as helper library.
Note: This is work in progress. It does NOT work, yet!
Hardware overview
The fx2lafw firmware is meant to work on any FX2-based hardware, including logic analyzers, FX2 eval boards, or other hardware which has this chip on-board.
Here's a quick overview of some of the relevant hardware information we have about the various devices:
| Device | Probes (pins) | FX2 package | Buffer/ESD-protection | Resistor per probe | I2C EEPROM | Support Status |
|---|---|---|---|---|---|---|
| Braintechnology USB-LPS | 16 | 56PVXC (SSOP) | none | ? 68 Ω | Atmel ATML0816 TINY13 20SU | TODO |
| CWAV BusBee | 4 | ? | ? | ? Ω | ? | TODO |
| CWAV USBee AX | 8 digital (PB0-PB7), 1 analog (PD0-PD7) | ? | ? | ? Ω | ? | BASIC SUPPORT |
| CWAV USBee DX | 16 digital, 2 analog | ? | ? | ? Ω | ? | TODO |
| CWAV USBee EX2 | 8 | ? | ? | ? Ω | ? | TODO |
| CWAV USBee SX | 8 (PB0-PB7) | 56PVXC (SSOP) | none | 560 Ω | Microchip 24LC01B | TODO |
| CWAV USBee ZX | 8 (PB0-PB7) | ? | ? | ? Ω | ? | TODO |
| EE Electronics XLA ESLA100 | 8 (PB0-PB7) | 56LFXC (QFN) | NXP 74HC245D | 100 Ω | Atmel ATMLH911 02B 1 | WIP |
| EE Electronics ESLA201A | 8 digital (PB0-PB7), 1 analog (PD0-PD7) | 56LFXC (QFN) | none | 100 Ω | Atmel ATMLH113 | BASIC SUPPORT |
| Lcsoft Mini Board | 16 (PB0-PB7, PD0-PD7) | 56PVXC (SSOP) | none | none | Shenzhen First-Rank Technology T24C128A | TODO |
| Saleae Logic | 8 (PB0-PB7) | 56PVXC (SSOP) | ST DVIULC6-4SC6 | ? Ω | ? | WIP |
| Robomotic MiniLogic | 8 | ? | ? | ? Ω | ? | TODO |
Download
$ git clone git://sigrok.git.sourceforge.net/gitroot/sigrok/fx2lafw
Building
$ cd fx2lafw $ git clone git://github.com/mulicheng/fx2lib.git $ make
Usage
$ cycfx2prog -id=vvvv:pppp prg:build/fx2lafw.ihx reset run delay:100
You have to provide the USB VID/PID of the FX2 device (before firmware upload) using the -id parameter.
TODO
- Digital Sampling
8-channel- 16-channel
- Analogue Sampling
- 1-channel
- 2-channel
- Voltage Meter
- Trigger Pin
- Clock Input
- Clock Output
- Frequency/Pulse Counter
Resources
- Browse Source Code
- sdcc (C compiler for 8051 microcontrollers, usable for FX2)
- fx2lib: SF project page, blog article, github repo, mailing list
- Cypress FX2 docs:
- CY7C68013A, CY7C68014A, CY7C68015A, CY7C68016A datasheet (PDF)
- EZ-USB Technical Reference Manual (TRM) (PDF)
- EZ-USB FX2LP appnotes
- EZ-USB FX2LP errata
- GPIF Designer (Windows software, requires login)
- CY3681 EZ-USB FX2 Development Kit (GPIF designer downloadable without login)