LeCroy LogicStudio
Jump to navigation
Jump to search
 | |
| Status | |
|---|---|
| Channels | 16 |
| Samplerate | up to 1GHz (when sampling 8 channels) ; up to 500MHz (when sampling 16 channels) |
| Samplerate (state) | — |
| Triggers | high/low state, rising/falling/any edge, more |
| Min/max voltage | ? |
| Threshold voltage | ? |
| Memory | ? |
| Compression | none |
| Website | teledynelecroy.com |
The LeCroy LogicStudio is an USB logic analyzer with 16 channels that offers up to 1GHz samplerate. When all 16 channels are enabled, the maximum samplerate is limited to at most 500MHz. Either the lower eight or the upper eight channels may be disabled for an increased samplerate of up to 1GHz. The device offers a continuous acquisition mode where all inputs are sampled at a frequency of 1kHz.
Hardware
- FPGA: Xilinx Spartan-6 XC6SLX16
- USB interface: Cypress CY7C68013A
- Crystal (FX2): 24.000MHz
- Crystal (FPGA): Unknown, xpress0?
Photos
LogicStudio
PCB, front
FPGA
FX2
