Difference between revisions of "Gossen Metrawatt Metrahit 28S"

**Gossen Metrawatt Metrahit 28S**
Status	in progress
Source code	gmc_mh_1x_2x
Counts	310000
IEC 61010-1	CAT III 600 V, CAT IV 300 V
Connectivity	Infrared (RS232/USB)
Measurements	voltage, current, resistance, capacitance, temperature, diode, continuity, insulation
Features	autorange, data hold, bargraph, backlight
Website	[1]

Revision as of 17:57, 31 August 2014

The Gossen Metrawatt Metrahit 28S is a 310000 counts handheld digital multimeter with IR (RS232/USB) connectivity.

It is not officially supported yet due to a lack of a test device, but should work like the Siemens B1105.

Power:
- Battery: 2x 1,5 V IEC R 6, IEC LR 6 or corresponding NiCd rechargeable batteries
- External power supply NA4/500 by Gossen Metrawatt, 4.2 V, 500 mA (for older version)
- External power supply NA5/600 by Gossen Metrawatt, 5 V, 600 mA (for newer version, 3-pin plug)

Fuse:
- Current 300 mA: FF (UR) 1,6 A/1000 V AC/DC (10 kA) 6,3 mm x 32 mm
- Current 3A/10A: FF (UR) 10 A/1000 V AC/DC (30 kA) 10 mm x 38 mm
  A 16A fuse described in older versions of the manual is wrong [2]!

@@ Line 3: / Line 3: @@
 | name            = [[Gossen Metrawatt]] Metrahit 28S
 | status          = in progress
-| source_code_dir = <!-- serial-dmm -->
+| source_code_dir = gmc_mh_1x_2x
 | counts          = 310000
 | categories      = CAT III 600 V, CAT IV 300 V
@@ Line 19: / Line 19: @@
 * '''Power''':
 ** Battery: 2x ''1,5 V IEC R 6'', ''IEC LR 6'' or corresponding NiCd rechargeable batteries
-** External power supply ''NA4/500'' by Gossen Metrawatt, 5V, 500 mA (for older version)
+** External power supply ''NA4/500'' by Gossen Metrawatt, 4.2 V, 500 mA (for older version)
-** External power supply ''NA5/600'' by Gossen Metrawatt, 5V, 600 mA (for newer version, 3-pin plug)
+** External power supply ''NA5/600'' by Gossen Metrawatt, 5 V, 600 mA (for newer version, 3-pin plug)
 * '''Fuse''':