Difference between revisions of "Rigol DS2072"
(Created page with "thumb|right|Rigol DS2072 The [http://www.rigolna.com/products/digital-oscilloscopes/ds2000/ds2072/ Rigol DS2072] is a 70MHz, 2GSa/s, 2-channel...") |
|||
| Line 1: | Line 1: | ||
[[File:Rigol_DS2072_front.jpg|thumb|right|Rigol DS2072]] | [[File:Rigol_DS2072_front.jpg|thumb|right|Rigol DS2072]] | ||
The [http://www.rigolna.com/products/digital-oscilloscopes/ds2000/ds2072/ Rigol DS2072] is a 70MHz, 2GSa/s, 2-channel digital storage oscilloscope. | The [http://www.rigolna.com/products/digital-oscilloscopes/ds2000/ds2072/ Rigol DS2072] is a 70MHz, 2GSa/s, 2-channel digital storage oscilloscope. The Rigol DS2102 and DS2202 are the models of the series with 100MHz and 200MHz bandwidth, except for small software differences all models in the series are identical. | ||
There exist two versions of the hardware, version 1 and version 2. Version 2 has a redesigned PCB which is prepared for additional modules, a signal generator and apparently a logic analyzer. Additionally version 2 hardware has the hardware fitted to switch the input impedance to 50 ohms. This is only accessible through SCPI commands, the option in the menu is disabled (as of firmware version 01.01.00.02). | |||
See [[Rigol DS2072/Info]] for more details (such as '''lsusb -vvv''' output) about the device. | See [[Rigol DS2072/Info]] for more details (such as '''lsusb -vvv''' output) about the device. | ||
| Line 21: | Line 23: | ||
== Protocol == | == Protocol == | ||
The device uses [[USBTMC]] for communication with a host PC. | The device uses [[USBTMC]] or LXI via its ethernet port for communication with a host PC. | ||
== Resources == | == Resources == | ||
* [http://www.eevblog.com/forum/testgear/first-impressions-and-review-of-the-rigol-ds2072-ds2000-series-dso/ EEVblog forums: Review of the Rigol DS2072] | * [http://www.eevblog.com/forum/testgear/first-impressions-and-review-of-the-rigol-ds2072-ds2000-series-dso/ EEVblog forums: Review of the Rigol DS2072] | ||
* [http://www.eevblog.com/2012/09/26/eevblog-360-rigol-ds2000-oscilloscope-teardown/ EEVblog: Teardown video of the Rigol DS2202] | |||
* [http://www.flickr.com/photos/eevblog/sets/72157631618295437/ High resolution images of the innards of Rigol DS2202 from EEVblog] | |||
[[Category:Device]] | [[Category:Device]] | ||
[[Category:Oscilloscope]] | [[Category:Oscilloscope]] | ||
[[Category:In_progress]] | [[Category:In_progress]] | ||
Revision as of 00:14, 6 November 2013
The Rigol DS2072 is a 70MHz, 2GSa/s, 2-channel digital storage oscilloscope. The Rigol DS2102 and DS2202 are the models of the series with 100MHz and 200MHz bandwidth, except for small software differences all models in the series are identical.
There exist two versions of the hardware, version 1 and version 2. Version 2 has a redesigned PCB which is prepared for additional modules, a signal generator and apparently a logic analyzer. Additionally version 2 hardware has the hardware fitted to switch the input impedance to 50 ohms. This is only accessible through SCPI commands, the option in the menu is disabled (as of firmware version 01.01.00.02).
See Rigol DS2072/Info for more details (such as lsusb -vvv output) about the device.
Hardware
TODO.
Photos
Device, front
Device, back
Connectors on left side
Device, right side
Device showing a waveform
Protocol
The device uses USBTMC or LXI via its ethernet port for communication with a host PC.