Fx2lafw

fx2lafw is an open-source firmware for Cypress FX2 chips which makes them usable as simple logic analyzer hardware.

It is licensed under the terms of the GNU GPL (version 2, or later) and written in C, using sdcc as compiler, and fx2lib as helper library.

Hardware overview

The fx2lafw firmware is meant to work on any FX2-based hardware, including logic analyzers, FX2 eval boards, or other hardware which has this chip on-board.

Here's a quick overview of some of the relevant hardware information we have about the various devices:

Device	USB VID:PID	Probes (pins)	FX2 package	Buffer/ESD-protection	Resistor per probe	I2C EEPROM	Status
ARMFLY AX-Pro	08a9:0014	8 (PB0-PB7)	56LTXC (QFN)	?	?	Atmel ATML920 24C02N SU27 D	90%1, 2
ARMFLY_Mini-Logic	08a9:0014	8 (PB0-PB7)	56LTXC (QFN)	?	?	Atmel ATML920 24C02N SU27 D	95%1
Braintechnology USB Interface V2.x	04b4:8613	8/16 (PB0-PB7, PD0-PD7)	56PVXC (SSOP)	none	none	Microchip 24LC64I	95%1
Braintechnology USB-LPS	16d0:0498	8/16 (PB0-PB7, PD0-PD7)	56PVXC (SSOP)	none	? 68 Ω	Atmel ATML0816 TINY13 20SU	95%1
CWAV BusBee	?	4	?	?	? Ω	?	TODO
CWAV USBee AX	08a9:0014	8 digital (PB0-PB7), 1 analog (PD0-PD7)	?	?	? Ω	?	90%1, 2
CWAV USBee DX	?	16 digital, 2 analog	?	?	? Ω	?	TODO
CWAV USBee EX2	?	8	?	?	? Ω	?	TODO
CWAV USBee SX	08a9:0009	8 (PB0-PB7)	56PVXC (SSOP)	none	560 Ω	Microchip 24LC01B	100%
CWAV USBee ZX	?	8 (PB0-PB7)	?	?	? Ω	?	TODO
EE Electronics ESLA100	0925:3881	8 (PB0-PB7)	56LFXC (QFN)	NXP 74HC245D	100 Ω	Atmel ATMLH911 02B 1	100%
EE Electronics ESLA201A	08a9:0014	8 digital (PB0-PB7), 1 analog (PD0-PD7)	56LFXC (QFN)	none	100 Ω	Atmel ATMLH113	90%1, 2
Lcsoft Mini Board	04b4:8613	8/16 (PB0-PB7, PD0-PD7)	56PVXC (SSOP)	none	none	Shenzhen First-Rank Technology T24C128A	95%1
Robomotic BugLogic 3	0925:3881	8 (PB0-PB7)	?	?	?	?	100%
Robomotic MiniLogic	0925:3881	8 (PB0-PB7)	56PVXC (SSOP)	74HC244A	?	2x Microchip 24LC02BI, 1x 24LC64I	100%
Saleae Logic	0925:3881	8 (PB0-PB7)	56PVXC (SSOP)	ST DVIULC6-4SC6	? Ω	?	100%

All devices use a 24MHz crystal.

¹ Sampling with 8 channels works fine, 16 channel sampling is not yet supported.
² Analog signal support is not yet implemented.

Download

$ git clone git://sigrok.git.sourceforge.net/gitroot/sigrok/fx2lafw

Usage

Build sigrok

• Build and install a sigrok frontend (CLI or GUI) with libsigrok >= 0.1.1 (or latest git HEAD) for your platform as usual, see e.g. Linux, Mac OS X, FreeBSD, or Windows.

Install the udev rules file

These steps prevent the need to run sigrok as superuser.

• Copy the udev rules file from sigrok/libsigrok/contrib/z60_libsigrok.rules to /etc/udev/rules.d/.
• Restart udev: sudo /etc/init.d/udev restart.

Build fx2lafw

$ cd fx2lafw
$ git clone git://github.com/mulicheng/fx2lib.git
$ make
$ sudo cp hw/*/build/*.fw /usr/local/share/sigrok-firmware/

Where /usr/local is your installation prefix.

Test

$ sigrok-cli -D

If everything has worked, sigrok can now see your fx2lafw device, ready for use.

TODO

• Digital sampling with 16 channels
• Analog sampling
  • 1-channel
  • 2-channel
  • Voltage meter
• Trigger pin
• Clock input
• Clock output
• Frequency/pulse counter
• Signal generator

Resources

• Browse Source Code
• sdcc (C compiler for 8051 microcontrollers, usable for FX2)
• fx2lib: SF project page, blog article, github repo, mailing list
• Cypress FX2 docs:
  • CY7C68013A, CY7C68014A, CY7C68015A, CY7C68016A datasheet (PDF)
  • EZ-USB Technical Reference Manual (TRM) (PDF)
  • EZ-USB FX2LP appnotes
  • EZ-USB FX2LP errata
  • GPIF Designer (Windows software, requires login)
    • CY3681 EZ-USB FX2 Development Kit (GPIF designer downloadable without login)