Difference between revisions of "GW Instek GPD series"
| Line 61: | Line 61: | ||
There was two hardware revisions (versions) of these units released. Model numbes did not change so it is difficult to | There was two hardware revisions (versions) of these units released. Model numbes did not change so it is difficult to | ||
determine whether unit is the "old" or "new" hardware revision. | determine whether unit is the "old" or "new" hardware revision. | ||
However, at least on GPD-3303S there is slight change to unit front panels; | |||
older units have slight space in output jacks between "CH1" and "FIXED" channel, while newer units have even spacing. | older units have slight space in output jacks between "CH1" and "FIXED" channel, while newer units have even spacing. | ||
Revision as of 18:20, 14 July 2020
 | |
| Status | supported |
|---|---|
| Source code | gwinstek-gpd |
| Channels | 2/3/4 |
| Voltage/current (CH1) | 0-30V / 0-3A |
| Voltage/current (CH2) | 0-30V / 0-3A |
| Voltage/current (CH3) | various |
| Voltage/current (CH4) | various |
| Connectivity | USB/serial |
| Features | memory save/recall, key lock |
| Website | gwinstek.com |
The GW Instek GPD series are 2/3/4 channel programmable linear DC power supplies with USB/serial connectivity.
Devices
| Device | Channels | Voltage range | Current range | Power |
|---|---|---|---|---|
| GPD-2303S | 2 | 0-30 V, 0-30 V | 0-3 A, 0-3 A | 180 W |
| GPD-3303S | 3 | 0-30 V, 0-30 V, 2.5/3.3/5.0 V | 0-3 A, 0-3 A, 0-3 A | 195 W |
| GPD-4303S | 4 | 0-30 V, 0-30 V, 0-5 V or 5-10 V, 0-5 V | 0-3 A, 0-3 A, 0-3 A or 0-1 A, 0-1 A | 195 W |
| GPD-3303D | 3 | 0-30 V, 0-30 V, 2.5/3.3/5.0 V | 0-3 A, 0-3 A, 0-3 A | 195 W |
So far, only the GPD-2303S is supported and tested. Adding support for the other devices should be relatively easy for someone with hardware access, though. Patches welcome!
Hardware
There was two hardware revisions (versions) of these units released. Model numbes did not change so it is difficult to determine whether unit is the "old" or "new" hardware revision. However, at least on GPD-3303S there is slight change to unit front panels; older units have slight space in output jacks between "CH1" and "FIXED" channel, while newer units have even spacing.
It would appear that older hardware revision units have firmware version < v2.00, but this has not been confirmed. Base on anecdotal evidence only.
Protocol
See the vendor user manual for details.
Resources
- Specification (PDF)
- Downloads (datasheet, user manuals, drivers, vendor software)