Difference between revisions of "Metex M-3850M"

From sigrok
Jump to navigation Jump to search
(Created page with "{{Infobox multimeter | image = 180px | name = Metex M-3850M | status = supported | source_code_dir = serial-dmm...")
 
Line 27: Line 27:
File:Metex M3850M back.jpg|<small>Device, back</small>
File:Metex M3850M back.jpg|<small>Device, back</small>
File:Metex M3850M side.jpg|<small>Device, side</small>
File:Metex M3850M side.jpg|<small>Device, side</small>
File:Metex M3850M lower back.jpg|<small>Device, side</small>
File:Metex M3850M lower back.jpg|<small>Device, lower pcb, back</small>
File:Metex M3850M lower front.jpg|<small>Device, side</small>
File:Metex M3850M lower front.jpg|<small>Device, lower pcb, front</small>
File:Metex M3850M lower front knob.jpg|<small>Device, side</small>
File:Metex M3850M lower front knob.jpg|<small>Device, lower pcb, front with mode switch</small>
File:Metex M3850M pack back.jpg|<small>Device, side</small>
File:Metex M3850M pack back.jpg|<small>Device, opened</small>
File:Metex M3850M upper back.jpg|<small>Device, side</small>
File:Metex M3850M upper back.jpg|<small>Device, upper pcb, back</small>
File:Metex M3850M upper front.jpg|<small>Device, side</small>
File:Metex M3850M upper front.jpg|<small>Device, upper pcb, front</small>
</gallery>
</gallery>



Revision as of 18:29, 14 February 2020

Metex M-3850M
File:Metex m3850m mugshot.png
Status supported
Source code serial-dmm
Counts 4000
IEC 61010-1
Connectivity RS232
Measurements voltage, current, hFE, logic, capacitance, frequency, resistance, continuity, diode
Features hold, relative, min/max, bargraph

The Metex M-3850M is a 4000 counts true rns, handheld digital multimeter with RS232 connectivity.

Hardware

RS232 cable:

Photos

Multimeter: Note that this Multimeter was repaired, since there were some parts broken or missing: The On/Off-Switch cap, the stand and the battery cover have been 3d-printed, so they are not original. The battery clip was replaced due to corrosion.

Cable:

See Device_cables#Metex_5-pin_RS232_cable.

Protocol

See Multimeter ICs#Alternative_Protocol. This device works with the Metex M-3860M driver. It appears as a 4 channel device, the first one corresponding to the main display, the other three channels to the small multi-purpose displays beneath.

Resources