Difference between revisions of "Tektronix TDS2024B"
Jump to navigation
Jump to search
(→Usage: "usbtmc0" is reserved for communication with the driver itself - "usbtmc1" is the one to use (based on own experience and <https://www.keysight.com/upload/cmc_upload/All/usbtmc.html>).) |
|||
| Line 29: | Line 29: | ||
== Usage == | == Usage == | ||
Test your | |||
Test your device for USB connection with Linux (also works in an VM): | |||
$ '''echo *IDN? > /dev/ | |||
$ '''echo *IDN? > /dev/usbtmc1 && cat /dev/usbtmc1''' | |||
Output should be similar to this: | Output should be similar to this: | ||
TEKTRONIX,TDS 2024B,C100044,CF:91.1CT FV:v22.16 | |||
<code>TEKTRONIX,TDS 2024B,C100044,CF:91.1CT FV:v22.16</code> | |||
== Protocol == | == Protocol == | ||
Revision as of 23:03, 8 April 2019
 | |
| Status | planned |
|---|---|
| Channels | 4 |
| Samplerate | 2GS/s |
| Analog bandwidth | 200MHz |
| Vertical resolution | 8bits |
| Triggers | edge, pulse width, composite video, alternate |
| Display | 5.7" QVGA (320x240) |
| Connectivity | USB host/device, GPIB |
| Features | tek.com |
The Tektronix TDS2024B is 4 channel oscilloscope with 2GS/s sampling rate, analog bandwidth of 200MHz and USB connectivity (optionally GPIB via the TEK-USB-488 adapter).
See Tektronix TDS2024B/Info for more details (such as lsusb -v output) about the device.
See Tektronix TDS2000B series for information common to all devices in this series.
Hardware
Photos
Device, front
Usage
Test your device for USB connection with Linux (also works in an VM):
$ echo *IDN? > /dev/usbtmc1 && cat /dev/usbtmc1
Output should be similar to this:
TEKTRONIX,TDS 2024B,C100044,CF:91.1CT FV:v22.16
Protocol
See Tektronix TDS2000B series#Protocol.