Difference between revisions of "Rigol DS4000 series"
Jump to navigation
Jump to search
m |
|||
Line 17: | Line 17: | ||
The [https://www.rigolna.com/products/digital-oscilloscopes/4000/ Rigol DS4000 Series] are 4-channel oscilloscopes with an analog bandwidth of 100-500MHz and 4GSa/s maximum sampling rate. | The [https://www.rigolna.com/products/digital-oscilloscopes/4000/ Rigol DS4000 Series] are 4-channel oscilloscopes with an analog bandwidth of 100-500MHz and 4GSa/s maximum sampling rate. | ||
See [[Rigol DS4000 series/Info]] for more detailed information on the device. | |||
== Protocol == | == Protocol == |
Latest revision as of 17:20, 29 December 2018
Status | supported |
---|---|
Channels | analog: 2 or 4, digital (MSO4000 series): 16 |
Samplerate | analog: 4GSa/s (interleaved), 2GSa/s (non-interleaved); digital: 1GSa/s |
Analog bandwidth | 100-500MHz (depending on model) |
Vertical resolution | 8bits |
Triggers | edge, pulse, runt, nth edge, slope, video, pattern, RS232/UART, I²C, SPI, CAN, FlexRay, USB |
Input impedance | 1MΩ‖15pF or 50Ω 300V RMS CAT I analog, 101kΩ‖9pF digital |
Memory | 70/140 Mpts analog (mode/ch-dependent), 28 Mpts/channel (digital) |
Display | 9 Inch WVGA (800x480) 160,000 colours |
Connectivity | USB host/device, ethernet (LXI), aux out (trigger, fast, pass/fail, GND), VGA |
Features | math: +, —, x, /, FFT, digital filters, editable advanced operations, logic; vertical sensitivity: 1 mV/div to 5 V/div |
Website | rigolna.com |
The Rigol DS4000 Series are 4-channel oscilloscopes with an analog bandwidth of 100-500MHz and 4GSa/s maximum sampling rate.
See Rigol DS4000 series/Info for more detailed information on the device.
Protocol
The device uses USBTMC or LXI via its Ethernet port for communication with a host PC. The protocol is based on SCPI commands.