Difference between revisions of "Voltcraft VC-890/Info"
Jump to navigation
Jump to search
(Created page with "== lsusb == This is the lsusb ouput on Linux: <small> $ '''lsusb -vvv''' Bus 010 Device 002: ID 10c4:ea80 Cygnal Integrated Products, Inc. CP210x UART Bridge Device Desc...") |
|||
Line 17: | Line 17: | ||
idProduct 0xea80 CP210x UART Bridge | idProduct 0xea80 CP210x UART Bridge | ||
bcdDevice 1.00 | bcdDevice 1.00 | ||
iManufacturer 1 | iManufacturer 1 Silicon Laboratories | ||
iProduct 2 | iProduct 2 CP2110 HID USB-to-UART Bridge | ||
iSerial 3 | iSerial 3 VS_c004_00002792 | ||
bNumConfigurations 1 | bNumConfigurations 1 | ||
Configuration Descriptor: | Configuration Descriptor: | ||
Line 71: | Line 71: | ||
wMaxPacketSize 0x0040 1x 64 bytes | wMaxPacketSize 0x0040 1x 64 bytes | ||
bInterval 1 | bInterval 1 | ||
Device Status: 0x0000 | |||
(Bus Powered) | |||
</small> | </small> |
Revision as of 20:38, 27 September 2017
lsusb
This is the lsusb ouput on Linux:
$ lsusb -vvv Bus 010 Device 002: ID 10c4:ea80 Cygnal Integrated Products, Inc. CP210x UART Bridge Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x10c4 Cygnal Integrated Products, Inc. idProduct 0xea80 CP210x UART Bridge bcdDevice 1.00 iManufacturer 1 Silicon Laboratories iProduct 2 CP2110 HID USB-to-UART Bridge iSerial 3 VS_c004_00002792 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 41 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.11 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 919 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Device Status: 0x0000 (Bus Powered)