Siglent SDS2000X series

File:SiglentSDS2X.png

Siglent SDS2304X

TODO: Description.

Hardware

The Siglent SDS2000X series oscilloscopes are capable of sampling up to 2GSa/s 140 Mpts/CH memory for the analog channels. Due to the fact that the 2 channels are shared, if both channels are on the sampling is limited to 1GSa/s and 70 Mpts/CH memory per channel. This is also true with the 4 channel devices. The analog channels have history memory where 80000 frames are stored and can be viewed via the scopes History function.

All device have the Logic Analyzer and DDS arbitrary waveform generator build in. Keep in mind that for the Logic Analyzer and waveform generator an extra software option must be purchased. For the Logic Analyzer and additional probe device (SPL2016) must also be purchased. The Logic Analyzer is capable 500 MSa/s with 140 Mpts/CH memory.

An extra software option to decode serial protocols is also available on all devices.

The model numbers are for the 2 channel 70Mhz bw: SDS2072X, 100Mhz bw: SDS2102X, 200Mhz bw: SDS2202X and 300Mhz bw: SDS3202X The model numbers are for the 4 channel 70Mhz bw: SDS2074X, 100Mhz bw: SDS2104X, 200Mhz bw: SDS2204X and 300Mhz bw: SDS3204X

Photos

• SiglentSDS2X.png

  Siglent SDS2304X

• SiglentSDS2302X.jpg

  Siglent SDS2302X

• SiglentSPL2016.png

  Siglent Logic-Probe SPL2016

Protocol

All devices support USB (USBTMC) and LAN (VXI-11) by default, and are implementing the IEEE488.2 protocol.

Resources

• SDS2000X Series Oscilloscopes - Data Sheet
• SIGLENT_Digital Oscilloscopes Remote Control Manual