Difference between revisions of "Velleman LABPS3005D"

**Velleman LABPS3005D**
Status	supported
Source code	korad-kdxxxxp
Channels	1
Voltage/current (CH1)	0-30V / 0-5A
Connectivity	USB, RS232
Features	programmable presets, over voltage protection, over current protection, output on/off
Website	velleman.eu

Revision as of 22:37, 21 October 2015

The Velleman LABPS3005D is a 1-channel programmable power supply (0-30V/0-5A) with both USB and RS232 connectivity.

It is the successor of the Velleman PS3005D.

See Velleman LABPS3005D/Info for more details (such as lsusb -v output) about the device.

See Korad KDxxxxP series for information common to all devices in this series.

Note: Some versions of the LABPS3005D appear to use the Atten PPS3000 series protocol instead.

See Korad KDxxxxP series#Protocol for the protocol details.

LABPS3005D protocol documentation differs actual devices. OVP0, OVP1, OCP0 and OCP1 are implemented.

Also Reply byte for STATUS? differs from documentation.

Bit	One	Zero	Notes
0	Constant voltage	Constant current	Channel 1 regulation mode. If output disabled, this is last value
1	?	Always	Channel 2 regulation mode
2	?	Always	Tracking bit no sense for 1 channel device
3	?	Always	Tracking bit no sense for 1 channel device
4	Beeper enabled	Beeper disabled	As documented. front panel OCP button beeps always.
5	OCP enabled	OCP disabled	Documentation says this is front panel locking
6	Output is enabled	Output disabled	As documented
7	( NOT OVP * OCP * NOT OUT ) + OVP OVP enabled OR OCP enablled AND output disabled	OCP and OVP disabled	Not very useful if output is disabled. Documented: 7 N/A N/A

@@ Line 95: / Line 95: @@
 | OCP and OVP disabled
 | Not very useful if output is disabled.
+Documented: 7 N/A N/A
 |}