Difference between revisions of "Mcupro Logic16 clone"
Jump to navigation
Jump to search
Whitequark (talk | contribs) |
Whitequark (talk | contribs) |
||
| Line 11: | Line 11: | ||
| triggers = none (SW-only) | | triggers = none (SW-only) | ||
| voltages = -0.9V — 6V | | voltages = -0.9V — 6V | ||
| threshold = 1.5V | | threshold = 1.5V (operates with 3.3V logic) | ||
| memory = none | | memory = none | ||
| compression = yes | | compression = yes | ||
Revision as of 19:19, 22 August 2014
 | |
| Status | planned |
|---|---|
| Source code | saleae-logic16 |
| Channels | 3/6/9/16 |
| Samplerate | 100/50/32/16MHz |
| Samplerate (state) | — |
| Triggers | none (SW-only) |
| Min/max voltage | -0.9V — 6V |
| Threshold voltage | 1.5V (operates with 3.3V logic) |
| Memory | none |
| Compression | yes |
| Website | [1] |
The mcupro Saleae16 is a USB-based, 16-channel logic analyzer with 100/50/32/16MHz sampling rate (at 3/6/9/16 enabled channels).
This is a clone of the Saleae Logic16.
See Mcupro Saleae16/Info for more details (such as lsusb -vvv output) about the device.
Hardware
- FPGA: Actel A3P125
- USB interface chip: Cypress CY7C68013A
- I2C EEPROM: Atmel 24C02N
- 3.3V voltage regulator: Advanced Monolithic Systems AMS1117-3.3
- 1.2V voltage regulator: Advanced Monolithic Systems AMS1117-1.5
- Crystal: 24.000MHz
Operation
This logic analyzer works with unmodified Saleae software. The Actel FPGA has on-chip flash storage, so it only requires an upload of Cypress FX2LP firmware in order to operate.
Photos
