Difference between revisions of "Gossen Metrawatt Metrahit 16I"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
{{Infobox multimeter | {{Infobox multimeter | ||
| image = | | image = [[File:metrahit_16i_1.jpg|180px]] | ||
| name = Gossen Metrawatt Metrahit 16I | | name = Gossen Metrawatt Metrahit 16I | ||
| status = in progress | | status = in progress | ||
| Line 24: | Line 24: | ||
== Photos == | == Photos == | ||
<gallery> | <gallery> | ||
File: | File:metrahit_16i_1.jpg|<small>Package</small> | ||
File: | File:metrahit_16i_2.jpg|<small>Inside</small> | ||
</gallery> | </gallery> | ||
== Measurement functions and ranges == | == Measurement functions and ranges == | ||
Revision as of 23:07, 6 November 2013
 | |
| Status | in progress |
|---|---|
| Counts | 3100 (31000) |
| IEC 61010-1 | CAT III 1000 V, CAT IV 600 V |
| Connectivity | Infrared (RS232) |
| Measurements | voltage, current, resistance, capacitance, temperature, diode, continuity |
| Features | autorange, data hold, bargraph |
| Website | [1] |
The Gossen Metrawatt Metrahit 16I is a 3100 counts handheld digital multimeter with IR (RS232) connectivity and insulation measurement (500/1000 V).
The resolution is one digit higher on the data interface.
Hardware
- Fuse: None!
- TODO.
Photos
Package
Inside
Measurement functions and ranges
| Measurement function | Range | Resolution | Deviation | sigrok result | Remarks |
|---|---|---|---|---|---|
| V= | 30 mV | 10 μV | ±(0,5% + 3) | mq V, unit V, mqflags DC | Not covered by autorange, use manual range |
| 300 mV | 100 μV | ±(0,5% + 3) | " | Not covered by autorange, use manual range | |
| 3 V | 1 mV | ±(0,25% + 1) | " | ||
| 30 V | 10 mV | " | |||
| 300 V | 100 mV | " | |||
| 600 V | 1 V | ±(0,35% + 1) | " | ||
| V≈ | 3 V | 100 μV | ±(1.0% + 3) (> 10 Digit) | mq V, unit V, mqflags AC,RMS | |
| 30 V | 100 μV | " | |||
| 300 V | 1 mV | " | |||
| 1000 V | 10 mV | " | |||
| V≃ | 3 V | 100 μV | ±(1.0% + 3) (> 10 Digit) | mq V, unit V, mqflags AC,DC,RMS | |
| 30 V | 100 μV | " | |||
| 300 V | 1 mV | " | |||
| 1000 V | 10 mV | " | |||
| A≈ (Clamp only) | 30 A | 10 mA | ±(2,5% + 3) (>10 Digit) | mq Curr., unit A, mqflags AC,DC,RMS | Current clamp with 100 mV/A required, e.g. GMC WZ12B |
| 100 A | 100 mA | " | |||
| Ω | 30.00 Ω | 10 mΩ | ±(0,5% + 3) | mq Res., unit Ω, mqflags - | |
| 300.0 Ω | 100 mΩ | " | |||
| 3.000 kΩ | 1 Ω | ±(0,4% + 1) | " | ||
| 30.00 kΩ | 10 Ω | " | |||
| 300.0 kΩ | 100 Ω | " | |||
| 3.000 MΩ | 1 kΩ | ±(0,6% + 1) | " | ||
| 30.00 MΩ | 10 kΩ | ±(2,0% + 1) | " | ||
| Ω Iso 500V | 1,600 GΩ | 1 kΩ - 1 MΩ | ±(3% + 2) | mq Res., unit Ω, mqflags - | Altogether 4 ranges with different resolution |
| Ω Iso 1000V | 3,100 GΩ | 1 kΩ - 1 MΩ | mq Res., unit Ω, mqflags - | Altogether 4 ranges with different resolution | |
| Diode/Cont. | 3.0000 V– | 1 mV | ±(0,25% + 1) | mq V, unit V, mqflags DC,DIODE | Diode and cont. are identical on this device, just without beeper for diode. |
| Cap. F | 30.00 nF | 10 pF | ±(1,0% + 3) | mq Cap., unit F, mqflags - | |
| 300.0 nF | 100 pF | " | |||
| 3.000 µF | 1 nF | " | |||
| 30.00 µF | 10 nF | ±(3,0% + 3) | " | ||
| Hz= | 300.0 Hz | 0.01 Hz | ±(0.1% + 3) | mq Freq., unit Hz, mqflags DC | |
| 3.000 kHz | 0.1 Hz | " | |||
| 30.00 kHz | 1 Hz | " | |||
| 100.00 kHz | 10 Hz | " | |||
| Hz≈ | 300.0 Hz | 0.01 Hz | ±(0.1% + 3) | mq Freq., unit Hz, mqflags AC | |
| 3.000 kHz | 0.1 Hz | " | |||
| 30.00 kHz | 1 Hz | " | |||
| 100.00 kHz | 10 Hz | " | |||
| °C | Pt100 –200.0 - +200.0 °C | 0.1 °C | 2 Kelvin + 5 | mq Temp., unit °C, mqflags - | |
| Pt100 +200.0 - +800.0 °C | ±(1.0% + 5) | " | |||
| Pt1000 –100.0 - +200.0 °C | 2 Kelvin + 5 | " | |||
| Pt1000 +200.0 - +800.0 °C | ±(1.0% + 5) | " | |||
| Event count | Seems not to be present on data output. | ||||
| Data Hold | mqflags += HOLD | Disabled while IR interface is active on Matthias' device. | |||
| MIN | mqflags += MIN | Influences only display, via IR flag is set, but actual current value is delivered. | |||
| MAX | mqflags += MAX | Influences only display, via IR flag is set, but actual current value is delivered. |
The column "sigrok result" contains in short form what the driver generates for the resp. data type.