Difference between revisions of "ICStation USBRelay"
Jump to navigation
Jump to search
(Initial device page) |
(Add hardware) |
||
| Line 19: | Line 19: | ||
File:ICStation_ICSE012A-back.jpg|<small>ICStation ICSE012A back</small> | File:ICStation_ICSE012A-back.jpg|<small>ICStation ICSE012A back</small> | ||
</gallery> | </gallery> | ||
== Hardware == | |||
* '''STM 8S003F3P6 microcontroller''': [https://www.st.com/resource/en/datasheet/stm8s003f3.pdf] | |||
* '''Prolific PL-2303HX USB to UART Bridge''': [https://www.prolific.com.tw/UserFiles/files/ds_pl2303HXD_v1_4_4.pdf] | |||
* '''ULN2803AG relay driver''': [https://www.ti.com/lit/gpn/uln2803a] | |||
== Protocol == | == Protocol == | ||
| Line 27: | Line 33: | ||
<small> | <small> | ||
$ ''' | $ '''sigrok-cli -d icstation-usbrelay:conn=/dev/ttyUSB0 --show''' | ||
Driver functions: | Driver functions: | ||
Multiplexer | Multiplexer | ||
Revision as of 12:48, 7 August 2021
 | |
| Status | in progress |
|---|---|
| Source code | icstation-usbrelay |
| Channels | 2, 4 or 8 |
| Ratings | 10A@250VAC, 10A@30VDC, 12A@125VAC, 12A@28VDC |
| Connectivity | USB/Serial |
The ICStation USBRelay is a USB relay card with up to 8 relays. Models with 2 (ICSE013A), 4 (ICSE012A) and 8 (ICSE014A) relays exist.
See Info for USB details.
Photos
ICStation ICSE012A top
ICStation ICSE012A back
Hardware
- STM 8S003F3P6 microcontroller: [1]
- Prolific PL-2303HX USB to UART Bridge: [2]
- ULN2803AG relay driver: [3]
Protocol
Example use
Detect the device and display its properties.
$ sigrok-cli -d icstation-usbrelay:conn=/dev/ttyUSB0 --show
Driver functions:
Multiplexer
Scan options:
conn
serialcomm
icstation-usbrelay - ICStation ICSE012A
Channel groups:
R1: channel
R2: channel
R3: channel
R4: channel
Supported configuration options across all channel groups:
enabled: on, off
Manipulate the state of relays.
$ sigrok-cli -d icstation-usbrelay:conn=/dev/ttyUSB0 --config channel_group=R1:enabled=off --config channel_group=R2:enabled=on --set