Difference between revisions of "DreamSourceLab DSLogic Plus"

From sigrok
Jump to navigation Jump to search
m (Different memory chip in the later version)
Line 22: Line 22:


* [http://www.xilinx.com/products/silicon-devices/fpga/spartan-6/ Xilinx XC6SLX9] U3: Spartan-6 FPGA (TQG144BIV13337)
* [http://www.xilinx.com/products/silicon-devices/fpga/spartan-6/ Xilinx XC6SLX9] U3: Spartan-6 FPGA (TQG144BIV13337)
* [https://www.alliancememory.com/wp-content/uploads/pdf/dram/256Mb-AS4C16M16SA-C&I_V3.0_March%202015.pdf Alliance AS4C16M16SA-7TCN] U1: 256Mbit SDRAM
* Sample memory:
** Original version: [https://www.alliancememory.com/wp-content/uploads/pdf/dram/256Mb-AS4C16M16SA-C&I_V3.0_March%202015.pdf Alliance AS4C16M16SA-7TCN] U1: 256Mbit SDRAM
** V211: [https://www.micron.com/~/media/Documents/Products/Data%20Sheet/DRAM/256Mb_sdr.pdf Micron MT48LC16M16A2 256Mbit SDRAM]
* [http://www.cypress.com/?mpn=CY7C68013A-56PVXC Cypress CY7C68013A] U2: FX2LP USB interface chip
* [http://www.cypress.com/?mpn=CY7C68013A-56PVXC Cypress CY7C68013A] U2: FX2LP USB interface chip
* [http://www.st.com/content/ccc/resource/technical/document/datasheet/59/05/c9/5b/7b/41/48/b6/CD00259167.pdf/files/CD00259167.pdf/jcr:content/translations/en.CD00259167.pdf 128Kbit I²C EEPROM] U4: ST M24128-BR
* [http://www.st.com/content/ccc/resource/technical/document/datasheet/59/05/c9/5b/7b/41/48/b6/CD00259167.pdf/files/CD00259167.pdf/jcr:content/translations/en.CD00259167.pdf 128Kbit I²C EEPROM] U4: ST M24128-BR

Revision as of 12:26, 11 October 2018

DreamSourceLab DSLogic Plus
DSLogic.png
Status supported
Source code dreamsourcelab-dslogic
Channels 1-16
Samplerate 400MHz(4ch), 200MHz(8ch), 100MHz(16ch)
Samplerate (state) 30MHz (?) or 50MHz (?)
Triggers high, low, rising, falling, edge, multi-stage triggers
Min/max voltage -0.6V — 6V, +-30V with provided probe-wires
Threshold voltage configurable: 0-5V (0.1V increments)
Memory 256MBit
Compression yes
Website dreamsourcelab.com

The DreamSourceLab DSLogic Plus is a 16-channel USB-based logic analyzer, with sampling rates up to 400MHz (when using only 4 channels). This differs slightly from the original DSLogic product in its configurable threshold voltage and different PCB layout. DreamSourceLab doesn't make the distinction between these two products very clear on their website.

See DreamSourceLab DSLogic Plus/Info for more details (such as lsusb -v output) about the device.

Hardware

Photos

Device:

Cables:

Firmware

See DreamSourceLab DSLogic#Firmware.

Resources