Difference between revisions of "MASTECH MS8250D"

From sigrok
Jump to navigation Jump to search
Line 17: Line 17:


== Hardware ==
== Hardware ==
'''Multimeter''':
Multimeter IC


CP2102 USB to UART Bridge Controller
* CP2102 USB to UART Bridge Controller


HY11P14 Embedded 18-Bit Σ∆ADC 8-Bit RISC-Like Mixed Signal Microcontroller
* HY11P14 Embedded 18-Bit Σ∆ADC 8-Bit RISC-Like Mixed Signal Microcontroller
[http://www.hycontek.com/wp-content/uploads/HY11P14_EN.pdf Datasheet]
[http://www.hycontek.com/wp-content/uploads/HY11P14_EN.pdf Datasheet]


DTA0660L
* DTA0660L


ATMLH538
* ATMLH538


== Photos ==
== Photos ==

Revision as of 16:54, 20 April 2018

MASTECH MS8250D
P1040343.jpg
Status in progress
Counts 6600
IEC 61010-1 CAT III (1000V) / CAT IV (600V)
Connectivity USB/serial
Measurements voltage, current, resistance, capacitance, frequency, duty cycle, diode, continuity
Features autorange, true-rms, data hold, min/max, relative, bargraph, backlight, ncv
Website mastech-group.com

The MASTECH MS8250D is a 6600 counts, CAT III (1000V) / CAT IV (600V) handheld digital multimeter with USB connectivity.

See MASTECH MS8250D/Info for more details (such as lsusb -v output) about the device.

Hardware

Multimeter: Multimeter IC

  • CP2102 USB to UART Bridge Controller
  • HY11P14 Embedded 18-Bit Σ∆ADC 8-Bit RISC-Like Mixed Signal Microcontroller

Datasheet

  • DTA0660L
  • ATMLH538

Photos

Protocol

The chip periodically sends 18-byte packets at 2400 baud, 8n1. There is no checksum or CRC in the packet. The payload is composed of a 1-1 mapping of the LCD segments.

Resources