Difference between revisions of "Mac OS X"

From sigrok
Jump to navigation Jump to search
 
(22 intermediate revisions by 8 users not shown)
Line 1: Line 1:
[[File:sigrok macosx.png|right|thumb|320px|sigrok-gui on Mac OS X]]
This page describes how to build the sigrok subprojects on Mac OS X.
This page describes how to build the sigrok subprojects on Mac OS X.


== Building using Homebrew ==
== Binary Disk Images (DMG) ==
These instructions have been tested on Mac OS X 10.9.1.
=== Requirements ===
 
Install Homebrew. http://brew.sh/
 
Tap sigrok:
 
$ '''brew tap rene-dev/sigrok'''
 
You cannot mix stable and unstable.
 
=== Unstable ===
$ '''brew install --HEAD libserialport'''
 
$ '''brew install --HEAD --with-libserialport libsigrok'''
 
$ '''brew install --HEAD libsigrokdecode'''
 
$ '''brew install --HEAD --with-libserialport sigrok-cli'''
 
$ '''brew install --HEAD pulseview'''
 
if it complains about python:
 
$ '''brew install python3'''
=== Stable ===
the stable version of pulseview does not build on OS X.
 
$ '''brew install sigrok-cli'''
 
== Building ==
 
These instructions have been tested on a clean install of Mac OS X 10.6.8, 10.8.4 and 10.9.1.
 
=== Requirements ===
 
Install MacPorts, follow the guide on [http://www.macports.org/install.php macports.org] (this step will require Xcode and Command Line Tools for Xcode be installed on your machine, which are also a dependencies to build sigrok).
 
Install Qt, download qt-mac-opensource-4.7.4.dmg from [http://qt.nokia.com/downloads/qt-for-open-source-cpp-development-on-mac-os-x qt.nokia.com] (Only needed for [[PulseView]]).
 
<!-- TODO: Install GTK+ libs and dependencies for [[sigrok-gtk]]. -->
 
Install git (not needed at least with 10.8.4):
 
$ '''sudo port install git-core'''
 
This will also pull in a bunch of dependencies required by git-core (and some of them also by sigrok).
 
Install boost, libusb, libzip and libftdi, the libsigrok build dependencies:
 
$ '''sudo port install boost libusb libzip libftdi0'''
 
Install autoconf, automake, cmake, glib2.0+, python 3.3, libtool and pkgconfig to satisfy version dependencies in the build process.
 
$ '''sudo port install autoconf automake cmake glib2 python33 libtool pkgconfig'''
 
Set the PKG_CONFIG_PATH environment variable to reflect the future locations of libsigrok and libsigrokdecode for the sigrok-cli build process.
 
$ '''export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig/'''


=== [[libserialport]] ===
We provide nightly Mac OS X disk image files (DMG) for [[PulseView]] and [[sigrok-cli]] (64bit x86 only; require OSX 10.9 Mavericks or higher). Please test and [http://sigrok.org/bugzilla/ report] any issues you encounter.
''libserialport'' is optional and required only for devices with serial connection, e.g. most multimeters. If not present during configuring libsigrok, the respective drivers in libsigrok will be disabled.


$ '''git clone git://sigrok.org/libserialport'''
<gallery widths="120px" heights="70px" perrow="5">
$ '''cd libserialport'''
File:Pulseview macosx dmg.png
$ '''./autogen.sh'''
File:Pulseview macosx.png
$ '''./configure'''
</gallery>
$ '''make'''
$ '''sudo make install'''


=== libsigrok ===
Downloads:


$ '''git clone git://sigrok.org/libsigrok'''
* [https://sigrok.org/download/binary/pulseview/PulseView-NIGHTLY.dmg Pulseview-NIGHTLY.dmg]
$ '''cd libsigrok'''
* [https://sigrok.org/download/binary/sigrok-cli/sigrok-cli-NIGHTLY.dmg sigrok-cli-NIGHTLY.dmg]
$ '''./autogen.sh'''
$ '''./configure'''
$ '''make'''
$ '''sudo make install'''


=== libsigrokdecode ===
The files are self-contained and ship with all required libraries, decoders and all freely distributable firmware files.


$ '''git clone git://sigrok.org/libsigrokdecode'''
If you need to provide additional firmware files, you can copy them to any of the standard paths where [[libsigrok]] searches for firmware files. See [http://sigrok.org/gitweb/?p=libsigrok.git;a=blob;f=README.devices README.devices] for details.
$ '''cd libsigrokdecode'''
$ '''./autogen.sh'''
$ '''./configure'''
$ '''make'''
$ '''sudo make install'''


=== sigrok-cli ===
== Building from source ==


$ '''git clone git://sigrok.org/sigrok-cli'''
'''Note:''' This should generally not be necessary for users, please just use the provided [[Mac_OS_X#Binary_Disk_Images_.28DMG.29|nightly installers]] (see above).
$ '''cd sigrok-cli'''
$ '''./autogen.sh'''
$ '''./configure'''
$ '''make'''
$ '''sudo make install'''


=== PulseView ===
=== Building from source using Homebrew ===
This is the recommended way of building sigrok from source on Mac OS X.


$ '''git clone git://sigrok.org/pulseview'''
Install [http://brew.sh Homebrew] (not covered here, see Homebrew docs for details) and all sigrok build dependencies:
$ '''cd pulseview'''
$ '''cmake .'''
$ '''make'''
$ '''sudo make install'''


<!--
<small>
=== sigrok-gtk ===
$ '''brew install libzip libftdi libusb libtool glibmm doxygen autoconf-archive sdcc python3 boost qt pkg-config cmake glib autoconf automake swig check'''
</small>


'''Note:''' The GTK+ GUI is not yet usable!
Clone [http://sigrok.org/gitweb/?p=sigrok-util.git sigrok-util]:


  $ '''git clone git://sigrok.org/sigrok-gtk'''
<small>
  $ '''cd sigrok-gtk'''
  $ '''git clone git://sigrok.org/sigrok-util'''
  $ '''./autogen.sh'''
  $ '''cd sigrok-util/cross-compile/macosx'''
$ '''./configure'''
  $ '''./sigrok-native-macosx'''
$ '''make'''
</small>
$ '''sudo make install'''


=== sigrok-qt ===
This script will download all the code, compile and install it in the '''$HOME/sr_macosx''' directory.


'''Note:''' The Qt GUI is not yet usable!
To conveniently use the tools you need to export the additional path.


$ '''git clone git://sigrok.org/sigrok-qt'''
<small>
  $ '''cd sigrok-qt'''
  $ '''export PATH=$HOME/sr_macosx/bin:$PATH'''
$ '''PKG_CONFIG_PATH=/usr/local/lib/pkgconfig qmake -spec macx-g++'''
</small>
$ '''make'''
$ '''sudo make install'''


If you get warnings claiming potential symbol conflicts when running qmake, you are likely not invoking '''qmake-qt4'''. Try running '''qmake-qt4''' to force the correct version.
=== Building from source using MacPorts ===


Open the sigrok-qt application just built:
Not supported by us. Please use one of the methods described above.


$ '''open -a sigrok-qt.app'''
While it shouldn't be too much work to adapt the [http://sigrok.org/gitweb/?p=sigrok-util.git;a=blob;f=cross-compile/macosx/sigrok-native-macosx sigrok-native-macosx] script to also work for [https://www.macports.org/ MacPorts], this is currently not recommended or supported. Patches to support both Homebrew and MacPorts in that script are welcome, though.
-->


== Notes ==
=== Building from source manually ===


* To build on Snow Leopard (10.6) you need to use the [http://qt.nokia.com/downloads/qt-for-open-source-cpp-development-on-mac-os-x Cocoa (32bit and 64bit) Qt libraries]. Don't use the default download link on that page but the one you can find further down the page.
Not supported by us. Please use one of the methods described above.
* Currently we are using [http://www.macports.org/ macports] for the libusb dependency and are relying on the fact that macports are installed in /opt/local.
* See also [http://xor-gate.org/writings/sigrok-osx-scratchbuild Wafelijzer's efforts to build Mac OS X binaries].
** Python framework incorrect build for OS X [http://bugs.python.org/issue15353 issue 15353]


== TODO ==
While this is technically possible if you know what you're doing, we don't recommend or support it. It's a lot easier to use the provided DMG files or build using the [http://sigrok.org/gitweb/?p=sigrok-util.git;a=blob;f=cross-compile/macosx/sigrok-native-macosx sigrok-native-macosx] script (see above).


* Find a sane way to bundle libusb with the sigrok.app.
=== Building from source using existing Homebrew packages/taps ===
* Include an icon with the app.
* [[Mac OS X/Dylib|Set the relative paths in the binary's and DyLibs]]
* [[Mac OS X/Universal| Building universal DyLibs and binaries]]
* Bundle the dynamic libraries with [http://macdylibbundler.sourceforge.net MacDylibBundler]


== Resources ==
Not supported by us. Please use one of the methods described above.


* [http://doc.trolltech.com/qq/qq09-mac-deployment.html Qt: Deploying Applications on Mac OS X]
There are various Homebrew recipies for sigrok, e.g. in [https://github.com/Homebrew/homebrew-science homebrew-science] or in [https://github.com/rene-dev/homebrew-sigrok rene-dev's homebrew-sigrok repo]. However, none of them are officially maintained or recommended or supported by us, and they might be incomplete and/or outdated, YMMV.
* [http://developer.apple.com/library/mac/#documentation/Porting/Conceptual/PortingUnix/compiling/compiling.html Porting UNIX/Linux Applications to Mac OS X]
* [http://cairographics.org/end_to_end_build_for_mac_os_x CairoGraphics - End to End build for Mac OS X]
* [http://developer.apple.com/mac/library/documentation/CoreFoundation/Conceptual/CFBundles/Introduction/Introduction.html#//apple_ref/doc/uid/10000123i-CH1-SW1 Documentation about bundles]
* [http://stackoverflow.com/questions/1596945/building-osx-app-bundle Stackoverflow - Building OSX App Bundle]

Latest revision as of 14:13, 17 July 2023

This page describes how to build the sigrok subprojects on Mac OS X.

Binary Disk Images (DMG)

We provide nightly Mac OS X disk image files (DMG) for PulseView and sigrok-cli (64bit x86 only; require OSX 10.9 Mavericks or higher). Please test and report any issues you encounter.

  • Pulseview macosx dmg.png
  • Pulseview macosx.png

Downloads:

The files are self-contained and ship with all required libraries, decoders and all freely distributable firmware files.

If you need to provide additional firmware files, you can copy them to any of the standard paths where libsigrok searches for firmware files. See README.devices for details.

Building from source

Note: This should generally not be necessary for users, please just use the provided nightly installers (see above).

Building from source using Homebrew

This is the recommended way of building sigrok from source on Mac OS X.

Install Homebrew (not covered here, see Homebrew docs for details) and all sigrok build dependencies: 

$ brew install libzip libftdi libusb libtool glibmm doxygen autoconf-archive sdcc python3 boost qt pkg-config cmake glib autoconf automake swig check

Clone sigrok-util: 

$ git clone git://sigrok.org/sigrok-util
$ cd sigrok-util/cross-compile/macosx
$ ./sigrok-native-macosx

This script will download all the code, compile and install it in the $HOME/sr_macosx directory.

To conveniently use the tools you need to export the additional path. 

$ export PATH=$HOME/sr_macosx/bin:$PATH

Building from source using MacPorts

Not supported by us. Please use one of the methods described above.

While it shouldn't be too much work to adapt the sigrok-native-macosx script to also work for MacPorts, this is currently not recommended or supported. Patches to support both Homebrew and MacPorts in that script are welcome, though.

Building from source manually

Not supported by us. Please use one of the methods described above.

While this is technically possible if you know what you're doing, we don't recommend or support it. It's a lot easier to use the provided DMG files or build using the sigrok-native-macosx script (see above).

Building from source using existing Homebrew packages/taps

Not supported by us. Please use one of the methods described above.

There are various Homebrew recipies for sigrok, e.g. in homebrew-science or in rene-dev's homebrew-sigrok repo. However, none of them are officially maintained or recommended or supported by us, and they might be incomplete and/or outdated, YMMV.

Retrieved from "https://sigrok.org/w/index.php?title=Mac_OS_X&oldid=16576"