Difference between revisions of "Rigol VS5202D"

From sigrok
Jump to navigation Jump to search
(→‎Models: Created models section and table)
 
(3 intermediate revisions by 3 users not shown)
Line 1: Line 1:
[[File:Rigol_VS5202D.png|thumb|right|Rigol VS5000 series]]
[[File:Rigol_VS5202D.png|thumb|right|Rigol VS5202D]]


The [http://rigol.com/ Rigol VS5202D] is a 2 channel analog and 16 channel digital, 200 MHz, USB-based oscilloscope/logic analyzer.
The [http://rigol.com/ Rigol VS5202D] is a discontinued 2 channel analog and 16 channel digital, 200 MHz, USB- and Ethernet-based oscilloscope/logic analyzer.
 
The device is [http://int.rigol.com/prodserv/Discontinued%20products/ discontinued by Rigol], but you can find the basic specs e.g. [http://www.batronix.com/shop/oscilloscopes/Rigol-VS5202D.html here]. Maybe some more info by comparing with the
[http://www.digitalscopes.net/pdf/DS1000%20Programming%20Manual%20%28English%29.pdf DS1000 programming manual].


See [[Rigol VS5202D/Info]] for some more details (such as '''lsusb -vvv''' output) on the device.
See [[Rigol VS5202D/Info]] for some more details (such as '''lsusb -vvv''' output) on the device.


== Models ==
See [[Rigol VS5000 series]] for information common to all devices in this series.
The Rigol VS5202D belongs to the Rigol VS5000 series of oscilloscopes:
 
{|border="0" style="font-size: smaller" class="alternategrey sortable sigroktable"
|-
! Model
! Analog Bandwith
! Logic Analyzer
! Time Base Range
|-
| VS5022
| rowspan="2" style="text-align:center" | 25 MHz
|
| rowspan="2" style="text-align:center" | 20ns/div – 50s/div
|-
| VS5022D
| style="text-align:center" | ●
|-
| VS5042
| rowspan="2" style="text-align:center" |  40 MHz
|
| rowspan="2" style="text-align:center" | 10ns/div – 50s/div
|-
| VS5042D
| style="text-align:center" | ●
|-
| VS5062
| rowspan="2" style="text-align:center"  | 60 MHz
|
| rowspan="2" style="text-align:center" | 5ns/div – 50s/div
|-
| VS5062D
| style="text-align:center" | ●
|-
| VS5102
| rowspan="2" style="text-align:center" |  100 MHz
|
| rowspan="4" style="text-align:center" | 2ns/div – 50s/div
|-
| VS5102D
| style="text-align:center" | ●
|-
| VS5202
| rowspan="2" style="text-align:center" |  200 MHz
|
|-
| VS5202D
| style="text-align:center" | ●
|-
|}
 
 
== Hardware ==
 
'''CPU'''
* [http://www.analog.com/static/imported-files/data_sheets/ADSP-BF531_BF532_BF533.pdf Analog Devices ADSP-BF531] Blackfin CPU
* [http://www.skhynix.com/products/consumer/view.jsp?info.ramKind=01&info.serialNo=HY57V281620FTP&posMap=EOL Hynix HY57V281620FTP] 16MB DRAM
* [http://www.spansion.com/Products/Parallel-Flash/Pages/Spansion%20GL.aspx Spansion S29GL032A] 4MB flash
 
'''Analog acquisition'''
* [http://www.altera.com/devices/fpga/cyclone/overview/cyc-overview.html Altera Cyclone EP1C6] 6000-gate FPGA
* [http://www.altera.com/literature/hb/cfg/cyc_c51014.pdf Altera EPCS] 128Kb flash memory
* [http://www.issi.com/pdf/61vps_lps25636a_51218a.pdf ISSI IS61LPS25636A] 1MB SRAM
 
'''Logic acquisition'''
* [http://www.altera.com/devices/fpga/cyclone2/overview/cy2-overview.html Altera Cyclone II EP2C5] 4600-gate FPGA
* [http://www.altera.com/literature/hb/cfg/cyc_c51014.pdf Altera EPCS] 128Kb flash memory
* [http://www.issi.com/pdf/61vps_lps25636a_51218a.pdf ISSI IS61LPS25636A] 1MB SRAM
 
'''Ethernet interface'''
* [http://www.davicom.com.tw/userfile/24247/DM9000EPProductBrief_v1.0.pdf Davicom DM9000EP] 10/100 ethernet controller
* 25MHz oscillator
 
'''USB interface'''
* [http://www.plxtech.com/products/usbcontrollers/net2272 PLX NetChip NET2272] USB 2.0 controller
* 130MHz oscillator


== Photos ==
== Photos ==
Line 110: Line 32:
File:Rigol VS5202D digital pod connectors.jpg
File:Rigol VS5202D digital pod connectors.jpg
</gallery>
</gallery>
== Protocol ==
'''Work in progress.'''
The Rigol communication protocol only uses the USB control and bulk transfer. Control is for sending setup and request smaller amounts of data. Bulk transfers is returned by the Rigol box with setup and image data.
All control transfers interesting for us has request type set to '''0xc0'''.
The request field in the control packets is what tells us which command
is actually sent.
All descriptions below should have both request type and request set to proper
values, obvious from the headlines what it should be.
=== Packet types ===
This information is completely reverse engineered by hand.
==== Read answer (request = 0x00) ====
Commands ending with a question mark ('?' ASCII 0x3f) returns answer in two control transfers.
First control transfer is to query the size of the data to be returned.
That is done by value set to 0. One byte of data is returned in the data field
by this operation which is the size of the string the Rigol box wants to return.
Second control transfer has value set to 1. The buffer, allocated to the size
just read, is also sent along the command to be filled with the data. The
returned data is an ASCII string.
==== Write command (request = 0x01) ====
Commands from the PC program to the Rigol box is sent as text strings.
Which commands that are available are listed in the [http://www.tequipment.net/pdf/Rigol/VS5000_programming.pdf '''Programming Guide'''] from Rigol.
Each character is sent in a control message with the value set to the ASCII character to be sent. Each ASCII string is terminated with a carriage return  (0x0d, '\r'), which terminates the transmission.
==== Request waveform data (Request = 0x04) ====
When waveform data is requested to be retrieved a control message is sent.
The index field of the setup data is a bitmask on which channels to be requested. It is encoded as bit 0 meaning Channel 1, bit 1 meaning Channel 2, bit 2 meaning Logic Channel 0, bit 3 meaning Logic Channel 1 etc.
The 4 byte data field of the control packet sent back as an ack contains number of bytes to be returned by bulk messages. It is encoded LSB first.
After that a series of bulk transfers occurs, with up to 4096 bytes in each transfer, until number of bytes given before is transferred. The first transfer can be (and usually, but not always, is) empty. The first returned data packet has a 780 byte header.
===== Data header =====
Last 8 bytes of header are identical to the ones returned by [[#SETUP DSO? (Request = 0x06)|SETUP DSO? (Request = 0x06)]]. Mostly contains zeroes so maybe can be omitted, however it does seem to contain some meaningful bytes, the meaning of which is as of yet unclear.
{| border="0" style="font-size: smaller"
|- bgcolor="#6699ff"
!Address
!Description
|- bgcolor="#eeeeee"
| 0x200
| 0x01 when trigger is "Single", 0x03 when Normal.
|- bgcolor="#dddddd"
| 0x201-?
| 0x03 when trigger "Normal", number of bytes correlates to number of bulk transfers to return
|- bgcolor="#eeeeee"
| 0x304-0x30B
| Identical to last 8 bytes of [[#SETUP DSO? (Request = 0x06)|"SETUP DSO?" packet]]
|}
==== Unknown control transfer (Request = 0x05) ====
This control transfer is unknown, but it occurs when stop has been pressed and streaming of big bulk blocks is terminated. All encoding in the control transfers are as described by request 0x04 above. The index field is always zero.
Returns 0x1000 or 0x080000 (the currently selected memory depth). After this request is called, bulk transfers occur the same way they would after [[#Request waveform data (Request = 0x04)|request 0x04]], except the data header is not present.
==== SETUP DSO? (Request = 0x06) ====
After this control transfer a bulk transfer occurs with 780 bytes of data.
What each byte means is still to be determined, but will occur in a separate description.
Same data is returned in response to undocumented instruction :SETUP:DSO? over TCP/IP.
When called in [[#Stop reading waveform data|stop sequence]] returns an empty bulk transfer at first, after which the bulk transfer is reissued and returns the 780 bytes of data.
==== SETUP LA? (Request = 0x0c) ====
After this control transfer a bulk transfers occurs with 260 bytes of data.
What each byte means is still to be determined, but will occur in a separate description.
Same data is returned in response to undocumented instruction :SETUP:LA? over TCP/IP.
==== SETUP ALT? (Request = 0x0d) ====
After this control transfer a bulk transfers occurs with 396 bytes of data.
What each byte means is still to be determined, but will occur in a separate description.
Same data is returned in response to undocumented instruction :SETUP:ALT? over TCP/IP.
=== Transfer sequences ===
==== Turn-on sequence ====
# *IDN?
# :INFO:FPGA?
# :STOP
# SETUP DSO?
# SETUP LA?
# SETUP ALT?
==== Turn-off sequence ====
Nothing special.
==== Start reading waveform data ====
2 analogue channels.
# :CLEARUSB
# :RUN
# SETUP DSO?
# SETUP LA?
# SETUP ALT?
# SETUP DSO?
# SETUP DSO? (waiting for something?)
# Request waveform data.
# The data is started get transferred using bulk transfer.
==== Stop reading waveform data ====
2 analogue channels.
# :STOP
# :CLEARUSB
# Request waveform data, which returns with size 0.
# Unknown transfer, which returns with waveform data without data header.
# The 8192 byte of data is bulked up.
# :INFO:EUQP?
# SETUP DSO?
==== Command sequences ====
# Command
# SETUP DSO?
# SETUP LA?
# SETUP ALT?
=== Data blocks ===
==== 260 bytes block ====
{| border="0" style="font-size: smaller"
|- bgcolor="#6699ff"
!Address
!Description
|- bgcolor="#eeeeee"
| 0
| Logic analyzer off/on
|- bgcolor="#dddddd"
| 1
| Logic analyzer available
|- bgcolor="#eeeeee"
| 2
| Logic analyzer channel 0 off/on
|- bgcolor="#dddddd"
| 3
| Logic analyzer channel 1 off/on
|- bgcolor="#eeeeee"
| 4
| Logic analyzer channel 2 off/on
|- bgcolor="#dddddd"
| 5
| Logic analyzer channel 3 off/on
|- bgcolor="#eeeeee"
| 6
| Logic analyzer channel 4 off/on
|- bgcolor="#dddddd"
| 7
| Logic analyzer channel 5 off/on
|- bgcolor="#eeeeee"
| 8
| Logic analyzer channel 6 off/on
|- bgcolor="#dddddd"
| 9
| Logic analyzer channel 7 off/on
|- bgcolor="#eeeeee"
| 10
| Logic analyzer channel 8 off/on
|- bgcolor="#dddddd"
| 11
| Logic analyzer channel 9 off/on
|- bgcolor="#eeeeee"
| 12
| Logic analyzer channel 10 off/on
|- bgcolor="#dddddd"
| 13
| Logic analyzer channel 11 off/on
|- bgcolor="#eeeeee"
| 14
| Logic analyzer channel 12 off/on
|- bgcolor="#dddddd"
| 15
| Logic analyzer channel 13 off/on
|- bgcolor="#eeeeee"
| 16
| Logic analyzer channel 14 off/on
|- bgcolor="#dddddd"
| 17
| Logic analyzer channel 15 off/on
|}
==== 396 bytes block ====
No information
==== 780 bytes block ====
{| border="0" style="font-size: smaller"
|- bgcolor="#6699ff"
!Address
!Description
|- bgcolor="#eeeeee"
| 8
| Analogue 1; OFF = 0, ON chan1 = 1, ON chan2 = 2 (bitmask?)\\
|- bgcolor="#dddddd"
| 12
| Analogue 1; OFF = 0, ON = 1
|- bgcolor="#eeeeee"
| 32
| Coupling chan1; DC = 0, AC = 1, GND = 2
|- bgcolor="#dddddd"
| 44
| Bandwidth Limit chan1; OFF = 0, ON = 1
|- bgcolor="#eeeeee"
| 46
| Invert chan1; OFF = 0, ON = 1
|- bgcolor="#dddddd"
| 90
| Analogue 2; OFF = 0, ON = 1
|- bgcolor="#eeeeee"
| 108
| Coupling chan2; DC = 0, AC = 1, GND = 2
|- bgcolor="#dddddd"
| 120
| Bandwidth Limit chan2; OFF = 0, ON = 1
|- bgcolor="#eeeeee"
| 122
| Invert chan1; OFF = 0, ON = 1
|- bgcolor="#dddddd"
| 448
| Acquire type; Normal = 0, Average = 1, Peak = 2
|- bgcolor="#eeeeee"
| 456
| Acquire average; 2 = 1, 4 = 2, 8 = 3, 16 = 4, 32 = 5, 64 = 6, 128 = 7, 256 = 8
|- bgcolor="#dddddd"
| 520
| Trigger mode; Edge = 0, Pulse = 1, Slope = 2, Video = 3, Alternate = ?, Pattern = 5, Duration = 6
|}
=== The image information bulk transfer ===


[[Category:Device]]
[[Category:Device]]

Latest revision as of 23:59, 16 August 2017

Rigol VS5202D

The Rigol VS5202D is a discontinued 2 channel analog and 16 channel digital, 200 MHz, USB- and Ethernet-based oscilloscope/logic analyzer.

See Rigol VS5202D/Info for some more details (such as lsusb -vvv output) on the device.

See Rigol VS5000 series for information common to all devices in this series.

Photos

  • Rigol VS5202D front.jpg
  • Rigol VS5202D back.jpg
  • Rigol VS5202D PCB top.jpg
  • Rigol VS5202D PCB bottom.jpg
  • Rigol VS5202D CPU.jpg
  • Rigol VS5202D ethernet-USB.jpg
  • Rigol VS5202D analog frontend.jpg
  • Rigol VS5202D analog op-amps.jpg
  • Rigol VS5202D analog.jpg
  • Rigol VS5202D analog EPCS1N.jpg
  • Rigol VS5202D logic.jpg
  • Rigol VS5202D logic EPCS1N.jpg
  • Rigol VS5202D PCB power.jpg
  • Rigol VS5202D PCB detail 1.jpg
  • Rigol VS5202D PCB detail 2.jpg
  • Rigol VS5202D PCB detail 3.jpg
  • Rigol VS5202D PCB detail 4.jpg
  • Rigol VS5202D PCB detail 5.jpg
  • Rigol VS5202D accessories.jpg
  • Rigol VS5202D digital pod.jpg
  • Rigol VS5202D digital pod connectors.jpg
Retrieved from "https://sigrok.org/w/index.php?title=Rigol_VS5202D&oldid=12615"